Used Hottinger Baldwin Over Pressure Monitor for sale (30,703)

Condition: used, Digital overpressure measuring device Digibar suitable for measuring static and quasi-static liquid and gas pressures. PE 100 is the battery-powered version. Fsdpfx Akscf Rb Tjhogf

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus • Control unit: AB22A • Installed modules: ML60B BL01 (2 units) AP17 Fodpfx Akszru Rrjhjgf SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Condition: • Used. • Visual condition as shown in the photos – normal signs of use.

Condition: ready for operation (used), Hottinger Baldwin M50 measuring amplifier, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fjdpfxji Ea Nxj Akhegf

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Fgedpfxoxxycys Akhef Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: used, This listing is for 1 of 6 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. Fedpfoxxx Tqsx Akhjgf - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations

Condition: used, This listing is for the Pendotech PMAT3 Pressure Mat Sensor Monitor The unit is in full working condition and is ready for immediate use The PendoTECH PressureMAT (PMA23/PMAT) is a dedicated pressure monitor, alarm, and transmitter designed specifically for use with PendoTECH’s single-use pressure sensors in biopharmaceutical and laboratory environments. Here's a breakdown of its key functions and features: What It Does Monitor: Displays real-time pressure readings (range from approximately –7 to 75 psi, or corresponding bar values) on a user-friendly backlit LCD for applications such as filtration, chromatography, and bioreactor pressure monitoring Alarm: Users can configure minimum and maximum pressure set-points. If readings fall outside these thresholds, the device triggers alarms—via on-screen warnings, audio alerts, and relay outputs to control external pumps or valves Transmitter: Delivers analog output signals (4–20 mA) and RS‑232 data outputs for integration into process control systems or PCs. Optional internal data logging may also be available Models & Capabilities Standard Units: Versions available for 1 to 4 pressure sensor inputs. Fjdpfx Akexhfq Iohjgf High-Resolution (HR): Tailored for low-pressure applications, offering up to 10× better precision PLUS Series: More advanced models (e.g., PMAT2P, PMAT3P) support additional functionalities like flow meter inputs and total flow measurement, plus external analog input and broader integration options

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. Fgsdpfexxx Ubox Akhof The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings.

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom Fodpfx Aksx Edrrohegf • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. Fjdpfx Akstrdyrshegf The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries • Integrated thermal printer Fjdpfxoxy S I Re Akhjgf • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display • Original side and top carrying bags Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services • Medical event coverage • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Fsdpfx Aefz Dvvokhegf High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Fgsdpfxofz Ax So Akhjf The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Fgedpfx Aksflpmqshof • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Fedpfx Akefzrapohegf User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Fjdpfx Akefz A D Nohjgf ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: ready for operation (used), Sillmann EDM LCD12L-CACS-SIL monitor from AGIE machine, serial number: 1183, serial number as shown in the photo. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Fgjdji D Tvcjpfx Akhsf

Condition: ready for operation (used), Montronix TS100 Tool Monitor, serial number: T1000022A0964, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgsdpei Eb R Aefx Akhjf

Condition: ready for operation (used), Montronix TS100 Tool Monitor, Serial No.: T1000025A0991, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgedpfsi Eb R Hox Akhjf

Condition: good (used), Used pressure vessel on rollers Article number: 10563 Last use: Pharmaceutical Volume: 750 liters Type: Standing on 4 rollers Material (in contact with media): 1.4571 / AISI316 Design: Double jacket and insulated Operating pressure according to nameplate: -1 / 3 bar Operating pressure, jacket: 10 bar Vessel dimensions: Manhole: 505 mm Outer diameter: 1240 mm Roller height: 295 mm Overall height: 2195 mm Overall width: 1240 mm Overall length: 1400 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: 1x 34 mm, 1x 9 mm Distance from outlet to bottom: 1x 280 mm, 1x 295 mm Various connections Double jacket Insulated Fgjdpogz Szwefx Akhjf Roller frame

Condition: excellent (used), Used Stainless Steel Pressure Vessel Article number: 10620 Last application: Pharmaceutical Fjdpfxjhpz E He Akhsgf Volume: 200 L Type: Standing on 4 rollers Roller height: 127 mm Material (in contact with media): 1.4404 / AISI316 Design: Single-walled Dome lid: 320 mm Operating pressure: -1/+3 Vessel dimensions: Outer diameter: 652 mm Cylindrical height: 560 mm Total height: 1295 mm Total width: 718 mm Total length: 865 mm Materials: Inside: 1.4404 / AISI316 Outside: 1.4301 / AISI 304 Equipment: Nameplate: No Various connections Pressure valve

Condition: excellent (used), Used stainless steel pressure vessel Article number: 10587 Fgodpfx Ashtnl Iokhsf Volume: 106 liters Type: standing on a roller base / 4 rollers Material (in contact with media): 1.4571 / AISI316 Design: single-walled Opening: 305 mm Operating pressure according to nameplate: 3 bar Max. operating temperature: -10 / 50 °C Dimensions of the vessel: Outer diameter: 440 mm Cylindrical height: 520 mm Overall height: 1070 mm Overall width: 450 mm Overall length: 505 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI 304 Features: Nameplate: yes Outlet diameter: 33 mm Distance from outlet to bottom: 210 mm Outlet valve: ball valve Vessel can be lifted from the roller base (450x455 mm) Various connections

Condition: good (used), Used stainless steel pressure vessel with insulation and electric heating Article number: 10465 Last application: Cosmetics Volume: approx. 300 liters Type: Standing on 4 rollers with forklift tunnel Material (in contact with media): 1.4301 stainless steel Design: Single-walled with insulation Bottom: Curved Fsdpfofcwxnjx Akhogf Top: Curved Operating pressure according to nameplate: +3 bar Dimensions of the vessel: Outer diameter: 700 mm Height of feet: 185 mm Distance from outlet to bottom: 190 mm Overall height: 1850 mm Overall width: 900 mm Overall length: 700 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Outlet: DN32 mm Outlet type: Disc valve Manhole: 600 mm Various connections Electric heating Insulated Forklift tunnel

Condition: good (used), Used stainless steel pressure vessel with insulation and electric heating Article number: 10466 Last application: Cosmetics Volume: approx. 400 liters Type: Standing on 4 rollers with forklift tunnel Material (media-contact): 1.4301 stainless steel Design: Single-walled with insulation Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: +3 bar Dimensions of the vessel: Outer diameter: 750mm Height of the feet: 190mm Distance from outlet to bottom: 220mm Overall height: 1900mm Overall width: 950mm Overall length: 750mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Outlet: DN32mm Outlet type: Ball valve Manhole: 645mm Fgjdpfx Aksfdgrhshof Various connections Electric heating, not tested Forklift tunnel

Condition: good (used), Used stainless steel pressure vessel with insulation and electric heating. Article number: 10467 Fedpfx Aofdgrlekhegf Quantity: 15 pieces Last application: Cosmetics Volume: approx. 350 liters Type: Standing on 4 rollers with forklift tunnel Material (in contact with media): 1.4301 stainless steel Design: Single-walled with insulation Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: +3 bar Vessel dimensions: Outer diameter: 740 mm Height of feet: 190 mm Distance from outlet to bottom: 190 mm Overall height: 1850 mm Overall width: 960 mm Overall length: 740 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Features: Outlet: DN32mm Outlet type: Ball valve Manhole: 645 mm Various connections Electric heating, not tested Forklift tunnel

Condition: good (used), Used stainless steel pressure vessel / buffer tank Last use: Food industry Item number: 10732 Volume: 900 liters Type: Standing, supported by 3 feet Material (in contact with the medium): 1.4571 / AISI316 Max. operating pressure: +2 bar Design: Single-walled Vessel dimensions: Outer diameter: 900 mm Cylindrical height: 1300 mm Overall width: 900 mm Overall length: 990 mm Overall height: 1870 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI 304 Features: Fgedpsimwc Hofx Akhof Outlet diameter: 35 mm Distance from outlet to bottom: 65 mm Outlet valve: Ball valve Foot height: 270 mm, adjustable Nameplate: no Sight glass Spray nozzle