Used Hsg Hsg Hs-Tl220 for sale (3,319)

Condition: ready for operation (used), Year of construction: 2021, laser power: 3,000 W, number of axes: 3, Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details. • Positioning accuracy: ±0.03 mm/m • Repositioning accuracy: ±0.03 mm • Maximum no-load speed: 110 m/min • Chuck rotation speed: 100 rpm • Maximum acceleration: 1.0 G • Material processing capacity: Knsdpezdiw Hsfx Ai Rsa • Round tubes: Ø20–210 mm • Square tubes: 20 × 20 mm to 150 × 150 mm • Maximum weight of a single tube: 100 kg • Bevel cutting: No • Chuck type: Standard pneumatic chuck

Condition: good (used), Year of construction: 2017, laser type: fiber laser, laser power: 700 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, Equipment: cooling unit, documentation/manual, Well-maintained HSG HS-M3015C fiber laser cutting machine manufactured in 2017, previously used in daily production at our metal fabrication company. The machine was replaced only due to the installation of a newer, higher-capacity laser cutting system as part of our production upgrade. It was fully operational until it was dismantled and is offered directly by the end user. The machine is complete, carefully dismantled, and ready for immediate pickup. This laser is an excellent choice for companies processing thin sheet metal, where reliability, low operating costs, and precise cutting are more important than very high laser power. Technical Specifications Manufacturer: HSG Laser Model: HS-M3015C Year of manufacture: 2017 Laser source power: 700 W Working area: 3000 × 1500 mm Power supply: 380 V / 50 Hz Fiber laser technology Cutting Capacity Mild steel: up to 8 mm Stainless steel: up to 3 mm Aluminum: up to 3 mm Included Equipment Cooling unit (chiller) Machine documentation User manual Condition Kodpfxjzmbyve Ai Rena Fully operational before dismantling Complete machine Ready for immediate pickup Inspection possible by appointment Loading assistance available Why choose this machine? Direct sale from the end user Used in regular production until replacement No accident or damage history Selling only due to production modernization Well maintained Cost-effective solution for sheet metal fabrication Location: Czech Republic

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Kjdpezg D I Ajfx Ai Rsna NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: used, Yarn cutter, hand cutter, spinning tube cutter, hand cutter for spinning tubes -Manufacturer: Timmer, hand-held yarn cutter Knodotpdmvopfx Ai Rea -Type:HSG-TG 6 -Cutting length: max. 235 mm -Use: for all common yarn carriers -Accessories: with operating instructions -Dimensions: 1060/510/H370mm -Weight: 74 kg

Condition: new, functionality: fully functional, Year of construction: 2020, useful working area: 3000x1500 mm laser head: klinge or precitec (option) X/Y return accuracy: 0.05mm/1000mm table capacity: maximum 800 kg max. speed: 120m/min max. acceleration: 1.5G cutting gas requirement: Oxygen and nitrogen Fiber laser: IPG 2500W metal cutting: steel, stainless steel, stainless steel coated steel, galvanized steel and aluminum (in case of 1kW) weight: 7500 kg Knedey It Ttopfx Ai Rea exchangeable table surface: yes (2 tables, automatic table changer) cover: yes.

Condition: new, sheet width 1050 mm plate thickness 1,5 mm distance between columns -- mm weight of the machine ca. 280 kg dimensions of the machine ca. 1300 x 750 x 1515 mm Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws Kedpoudc Izofx Ai Rjna - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm

Year of construction: 2020, condition: as good as new (ex-display), 1x Drive unit with chassis 1x Follow-up unit with chassis and height adjustment - Centric roller support adjustment with hand crank - Manual height adjustment, locking with locking pin - Adjustable height difference: 0-350 mm - Load capacity: 2,500 kg / unit - Component diameter: 200mm – 2,000mm - Running rollers: PUR wheels - Dimensions Length/Width: approx. 1,900mm x 460mm Knsdpsfxgrdofx Ai Roa - Chassis track width: 1435mm - Rotation speed: 0 - 2,000 mm/min - Operation: Handheld remote control and foot switch

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Filtration: Welldone dust collector and filtration unit Key highlights Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation Knodpfjzuf Dhex Ai Rea High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Operating temperature / humidity 0 – 40 °C / < 90 %

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902026742, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 08/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", color: black, Note: Photos are archive images. The vehicle may still be in use / show signs of use. Chassis / Haulage Semi-Trailer Fifth wheel plate with replaceable 2" kingpin. Coil well approx. 7,040 mm long. 6 coil supports (coil pockets, inner dimension 82 x 52 mm). Coil cover with screen-printed panels and steel sub-beams. Outer frame slightly angled with "Load-Lock" profile for strap attachment. 24t 2-speed landing legs, single-side operation, half-round foot with straight mounting plate, with shock compensation. Note: rear swing clearance approx. 1,930 mm. Pull-out ladder at rear, side door retainers. 2 wheel chocks with holder. Aluminum side underrun protection. Galvanized steel rear underrun protection. 6 quarter-shell mudguards (in front of 1st axle and behind each axle), with anti-spray flaps behind each axle. Rear bumper/impact protection. Heavy-duty pallet stop, bolted on both sides, approx. 15–20 mm high, lashing points every 200 mm (loading height reduced by approx. 15–20 mm). Spare wheel carrier for 1 spare wheel, incl. wheel mounting kit. Spare wheel, same make as standard tires, steel rim. Plastic tool box with drawer and shelf, 650 x 520 x 670 mm (W/H/D), padlock-lockable. Axles & Suspension SAF disc brake axles, laser-aligned chassis/axles to reduce tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle incl. forced lowering and traction assist, activated via "3x braking" (traction assist functional up to 30% axle load overrun, max. speed 25 km/h). Braking System 2-line air brake system, color-coded lines for easy servicing. Spring-loaded parking brake. 2 mismatch-proof coupling heads at front. EBS (electronic braking system) with EBS socket at front. Vehicle stability system, axle load detection via EBS CAN-bus signal. Wheels & Tires 6x 435/50 R19.5", 6x steel rims, factory silver. Electrics 24V, multi-chamber LED lights. 2x white/red LED rear lane-guide lights. 2x 7-pin and 1x 15-pin mismatch-proof sockets at front. Floor Screen-printed panels approx. 30 mm thick, high point-load capacity, max. forklift axle load 5,600 kg. Front Wall / Front Corner Posts Ksdpfjztqd Djx Ai Rona 2,580 mm high. Steel corner posts, full-volume design. Rear Wall / Rear Corner Posts Rear corner posts in steel up to roof edge, tarpaulin attachment via round tube and tensioning ratchet. Rear corner posts mechanically widen by 400 mm each for loading/unloading (rear doors, roof, side curtains and center posts must be open). Rear portal doors, 2-wing, each with 2 internal rod locks. Fliegl "I-Lock" integrated door lock. Roof Fliegl "Blitz" sliding tarpaulin roof, rear end-lift foldable, tarpaulin slides front to back. L-shaped roof beam for automotive industry use. Non-elastic roof, no sagging of roof beam. EcoLift roof, liftable approx. 380 mm, both sides, gas-strut assisted. 3 front drive positions: interior height approx. 2,900 / 2,950 / 3,000 mm. Optimized rain gutter at rear. Registration / Certification Type approval per EC 2007/46. Cargo securing certificate per EN 12642 XL, plus beverage transport certificate per VDI 2700 sheet 12ff. Pallet stop on both sides, approx. 20 mm high (loading height reduced by approx. 20 mm). 24/7 service hotline. Prepared for single-row license plate holder. Warning panel per ECE-70.

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Knjdpfszur Efjx Ai Rea Spiral diameters range from 3/16″ to 1 1/8″ Working width up to 500 mm Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900mm Infeed height: 300mm Shaft width: 1030mm Shaft diameter: 700mm Knife length: 1030mm Number of knives: 3 pcs Screen dimensions: 70x70mm Bottom: 2 toothed feed rollers Bottom roller motor: 7.5kW Top: 2 toothed feed rollers Top roller motor: 7.5kW Belt conveyor Redler chain conveyor 5600mm + 10600mm 2.2kW Infeed belt width: 800mm Main motor: 90kW Reverse operation Total machine dimensions (L/W/H): 3300x3100x1700mm Shredder base dimensions: 3300x2080x1940mm Kodpozrm T Sefx Ai Rjna Feeder / redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Base dimensions for infeed belt: 5100x1300x2520mm Total weight approx.: 16000kg ADVANTAGES – German-made – Redler chain conveyor equipped with scrapers – Reverse operation – DTR technical documentation – Used shredder in very good condition Net price: 219,900 PLN Net price: EUR 52,350 (at EUR 4.2 exchange rate) (Prices may vary with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2024, Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspection is possible. Knodpfx Aezpyw Ssi Rea

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902036561, empty load weight: 5,820 kg, maximum load weight: 29,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: red, Archive images shown. The vehicle may currently be in use. #Curtainsider Semi-Trailer Chassis Lightweight high-tensile steel welded construction, fifth wheel plate with replaceable 2" kingpin New slightly angled outer frame with "Load-Lock-Profil" for load strap attachment 3 pairs of additional recessed lashing rings in outer frame, 2.5 t each 14 pairs of additional recessed lashing rings in outer frame, 2.5 t each 24 t two-speed landing gear, single-side operation, straight legs with load compensation SAF landing gear Note: Clear landing leg corner dimension / rear swing clearance approx. 1,930 mm Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Kjdjxbzkkspfx Ai Rena Painted RAL 3002 Carmine Red No paint warranty on overpainted coated components Galvanised steel rear underrun protection Painted RAL 9010 Pure White, incl. underrun protection brackets No paint warranty on overpainted coated components Quarter mudguards in front of and behind axle assembly EC-compliant anti-spray mudflaps Rear impact protection 1 aluminium ladder, approx. 2,550 mm, with side-mounted holder behind side underrun protection Bolted outer frame rail for direct curtain tensioners, protruding approx. 15–20 mm above loading platform, with perforated top profile for load straps 2 plastic toolboxes, W 800/H 450/D 450 mm 1 each on left and right, behind the 3rd axle #Axles + Suspension BPW disc brake axles with 430 mm brake discs Wheel hubs painted RAL 3002 Carmine Red "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Air suspension #Braking System Twin-line air brake system Colour-coded pipe routing for easy servicing Spring parking brake 2 non-interchangeable front coupling heads, without connecting lines 24 V WABCO EBS electronic braking system with front EBS socket, without connecting cable Warning: Trailer must only be towed by vehicles ensuring ABS functionality Raise/lower valve with auto-reset function Vehicle stability system Idem telematics incl. LIN battery, coupling sensor and tracking #Wheels and Tyres 385/65 R22.5 tyres, manufacturer's choice Polished Alcoa Dura-Bright aluminium wheels #Electrical System 24 V multi-chamber lights with yellow side LED lights Light carrier painted RAL 9010 Pure White No paint warranty on overpainted coated components 2 front white position lights 2 rear white/red outline marker lights 2 x 7-pin and 1 x 15-pin non-interchangeable front sockets LED work lights on both sides Positioned at the first cross-member behind the landing gear 2 additional rear LED work lights #Curtain Curtain with welded-in horizontal and vertical reinforcement straps Archive images shown. The vehicle may currently be in use.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. # Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation, with load compensation Extendable rear ladder, side door retainers 2 wheel chocks with holders Aluminium side underrun protection, galvanized steel underrun protection Quarter mudguards with EC-compliant anti-spray mud flaps Rear impact protection 2 spare wheel holders + 1 spare wheel (same make as standard tyres) Lockable plastic toolbox Storage box for fire extinguisher up to 6 kg # Axles + Suspension BPW disc brake axles with 430 mm discs Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) # Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake EBS electronic braking system with EBS socket at front Raise/lower valve and vehicle stability system # Wheels and tyres 385/65 R22.5" steel rims, factory silver finish # Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin sockets at front # Floor Approx. 30 mm phenolic plywood floor panels on 8 longitudinal supports High point load capacity for forklift axle loads up to max. 7,900 kg Rear steel chequer plate flooring approx. 300 mm length # Front wall / Posts Height 2,580 mm Ksdpfxszmtmue Ai Rjna Steel corner posts in high-volume design "Crash Blocker" steel impact protection inside lower front area # Centre posts 3 pairs of sliding posts, movable over full length 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats # Rear wall Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with internal rotary bar locks # Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles # Roof Sliding roof system with rear end lift-up function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading/unloading Optimized rear rain gutter Complete body supplied loose as a kit (unassembled).

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 11022311032, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, workpiece weight (max.): 1,500 kg, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Workpiece weight: 1,500 kg Sheet thickness, structural steel: 40 mm Sheet thickness, stainless steel: 40 mm Sheet thickness, aluminum: 40 mm Sheet thickness, brass: 16 mm Cutting heads: 1 Travel speed: 200 m/min MACHINE DETAILS Control system: CNC Knsdjzlg Hfjpfx Ai Rea Total power requirement: 55 kW Extraction system/filter JNSK06 Extraction capacity: 6,500 m³/h Power consumption: 7.5 kW Number and type of filter cartridges: 6 Filter area: 120 m² Efficiency: 99.99% Space requirement: approx. 10,050 x 4,920 x 2,200 mm

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Kjdpfszl D Iysx Ai Rjna Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Knsdpfxjzlciij Ai Rea Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres Knedszlcdgjpfx Ai Rea 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030381, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: black, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, 24 tons. Two-stage support jacks, single-sided operation, with straight lower part, without thrust compensation. Note: Free support foot angle or free rear swivel radius approx. 1930 mm without supports, extension ladder at the rear, door latch on the side, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Rear impact protection, "blocker," transverse steel angle zinc-plated, as forklift protection and to protect the door hinges, pallet stop on both sides approx. 15-20 mm high, in bolted version, loading height reduced by approx. 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Braking system: 2-line compressed air braking system, color-coded lines for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable, with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, no truck installation (no calibrated scale). Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this must be possible in the truck). Kedpey Tvwxefx Ai Rena Electrical system: 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED. 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor: Sieve print plates approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Front wall / front corner posts 2,580 mm high, corner posts steel in full profile, release mechanism for side tarpaulin on the front wall, "crash blocker," at the bottom inside at approx. 140 mm height with steel impact protection. Side supports: 2 pairs of sliding supports, adjustable over the entire length, with 4 insertion pockets and at the bottom with a long pocket. 2 pairs of support positions. Insertion slats: 5 rows of aluminum V-shaped insertion slats. Rear wall / rear corner posts Corner posts at the rear steel to the bottom edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin, with welded-in horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, minimal deflection of the roof beam during loading and unloading, anti-ice system, with 1 hose in the middle, with automatic forced ventilation via brake light, optimal rain strip at the r

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm Knjdpfx Aszlaqkji Rsa * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,500 mm, loading space width: 1,358 mm, loading space height: 1,918 mm, total width: 1,920 mm, total height: 2,475 mm, A20 GW26P0201504 Refrigerated box trailer by Unsinn, type UKT6C 251319-13-14 Gross weight: 1,300 kg, low-loader, 4x heavy-duty support legs, overrun brake, equipped with GOVI air conditioning unit, model Arktik 1600N. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics Axles (braked version): AL-KO braking system Body: Thermo-sandwich construction * Inner and outer skins made of galvanized and powder-coated steel sheet for robust durability * PU-core insulation * Double-wing rear doors with aluminum hinges * Lever-lock and stainless-steel door retainer for the cooling compartment * Rear frame and edging profiles made of anodised special aluminum profiles for attractive aesthetics * All-around 3-sided impact protection Vehicle not refurbished Kjdpfeyn Ug Tjx Ai Rjna Subject to errors and prior sale

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Ksdpfx Asyn Uc Ioi Rena Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale.

Condition: excellent (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN80 -Width: 190 mm -Nominal pressure: PN10 -Weight: 18 kg Kedsb A Ru Tspfx Ai Rona

Condition: good (used), Gear motor, electric motor, electric gear motor Knsdpfxjqa I Hvo Ai Rja -Manufacturer: ABM Baumüller, geared motor type HSG5DFR/44D8556A-4 -Speed: 24.5 rpm -Power: 0.09 kW 1350 rpm -Design: B5 -Shaft: Ø 10 x 20 mm -Protection rating: IP55 -Dimensions: 245/130/H145 mm -Weight: 4.2 kg

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902027997, empty load weight: 6,832 kg, maximum load weight: 28,168 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2021, loading space length: 13,460 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 15,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: black, The pictures are archive images; the vehicle may still be in use! Kodpfx Aswk Dg Nei Rena Optional equipment upon request.