Used Hydr. Pneum. Aluminum Circular Sawing Machine for sale (72,878)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm Iiedpfxormkl Aj Anwec - Infeed roller conveyor 3000 mm

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - mitre adjustment left + right 0 - 90 ° - cutting speed 1750 / 3500 m/min - feed speed of the saw blade 0 - 3 m/min - rapid return 3000 mm/min - Saw drive 400 V / 3,7 / 4,4 kW - 2 pieces pneum. Material clamping vices with adjustable clamping pressure - space requirement approx. W 1200 x H 1900 x D 1200 mm Isdpfxjg A Rgfe Anwsic - weight approx. 600 kg

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) Iodpfx Aedzp T Donwsic - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding Iijdpfxexvbvvs Anwjc - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm Iiodpfey Uwpxsx Anwjc - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm Ijdex Sxx Aopfx Anwoic - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: Ijdpowk Icbjfx Anwoic - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Iiodpsxua N Sefx Anwjc Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Iodpfx Ajw Nacvonwjic Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2025, New display machine! Including 3-axis control Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment General features of the P 450: Sliding table made of anodized aluminum, including high-precision guide rail made from hardened and ground steel Sliding table can be locked in any position Iijdpfx Anjwvcf Uowoc Saw blade guard with swivel-away function Extension arm with adjustable mitre stop and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrics and safety devices according to CE standards Technical data: Saw blade tilting: 0° to 45° Table dimensions: 1,030 x 680 mm Sliding table dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP 2 extraction ports Mitre stop extendable to 3,600 mm Location:

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Iiedpfx Ansr Ilktjwjc Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades Iiedpfezb Ngzox Anwsc --> --> Special price: EUR 4,000.00 net, free on board!

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Iedexw N N Hopfx Anwoic Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit Iiodpfx Anow D T Dkjwec T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard Iiodpfx Aoxw N Sbonwsc TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) Isdpfxsy Dcqye Anwoic - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 1996, functionality: fully functional, Circular saw SICAR EXPRESS 32 year of construction 1996 S/N 800066 Manufacturer SICAR Italy Aluminum sliding carriage 1600mm main saw motor 5,5hp ( 4,0kW ) motor independent scoring motor 0,55kW Blades with 300/350/400 mm Cutting height of 110 mm at 90° and 80 mm at 45°. Manual tilt and height adjustment Inclination of main saw blade and scoring blade reaches 45° Extra ruler for angular cuts Workpiece hold-down device Top extraction also for 45° cuts Voltage 380 V, 50 Hz. CE marked 720 kg Iiedpfx Anjtw D Tbjwsc Technical data subject to change

Condition: good (used), Year of construction: 2004, functionality: fully functional, Griggio CA 400 sliding table saw Year of manufacture 2004 S/N MC 00071750 Cutting length aluminum sliding table: 3200mm Double roller on the outside mechanical height and tilt adjustment motor power 5.5 kw main blade diameter 400 mm Iisdpfx Anetpv Abewsc with scoring saw blade 3 speeds: 300/400 / 600 rpm Machine according to CE standard Weight 820 kg

Condition: used, functionality: fully functional, machine/vehicle number: 032-121331, saw blade diameter: 650 mm, cutting height (max.): 245 mm, feed length X-axis: 400 mm, input voltage: 400 V, saw drive: 12,000 W, saw blade speed: 3,000 rpm, AVOLA GAMA 65 V Circular Saw Machine / Miter Saw - Fully Equipped (12 kW) Professional AVOLA GAMA 65 V circular saw machine in top condition and with comprehensive equipment for sale! For sale is a crosscut, rip, miter, and bevel saw with lateral feed from the renowned manufacturer AVOLA (model GAMA 65 V), including extensive accessories and original professional optional equipment. The machine is characterized by its exceptional power and precise cutting performance in professional commercial applications. Iiedpfxezbuyys Anwec Technical Data & Highlights (Standard Version): Drive motor: Powerful 12.0 kW / 400 Volt - 50 Hz (Direct Drive) Speed (Motor/Saw Blade): 3,000 rpm Cutting heights: 90°: 245 mm | 45°: 164 mm | 30°: 113 mm Saw blade: Carbide-tipped saw blade 650 mm Machine table: Laterally adjustable by approx. 400 mm with pneumatic braking system Angle adjustment: Turntable adjustable from 0 to 270° Saw blade bevel adjustment: Electrically adjustable from 90° to 30° Miter device: Pneumatically operated via a safe two-hand control Cutting indicator: Integrated laser for precise miter cuts Safety & Comfort: Machine hood with lateral PVC protective guards, pneumatic clamping cylinders (left/right), mechanical stop system for height adjustment with measuring scale Dust extraction: 2 dust extraction connections (diameter 160 / 125 mm) Roller tables: 6 meters on the left side, 4 meters on the right side 2x SCHUKO Mobile Dust Extraction Unit Profi S 3 (sound-dampened version) Commercial sale by Fischer Bau GmbH. The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Warranty Note: For companies/entrepreneurs (B2B): The sale is made with the complete exclusion of any warranty, guarantee, and liability for defects. Condition & Inspection: Purchased as inspected and tested. An inspection and functional test are possible in Weissenbach 153, 8967 Haus im Ennstal, by prior arrangement.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Paoloni TT20-I Circular Saw Milling Machine S/N 00005/90 Year of construction 1990 Manufacturer Paoloni Macchine S.p.A. Italy Saw blade diameter max 350 mm Aluminum carriage with V-guide carriage length 2.100 mm rip fence 125mm Support table up to 340cm Saw blade tiltable 45 degrees scoring unit 125mm, 1 HP Cutting height max 110mm Motor 5.5 HP Speeds: 3000/4500 / 6000 Table milling machine Spindle diameter 30mm for tenon cutters Spindle stroke 180mm Ijdpfstq Ivlsx Anweic max table opening 340mm motor 5,5 HP 5 different speeds (adjustable with belt pulley) 2500-8500 RPM weight 1300 kg

Condition: ready for operation (used), Year of construction: 1952, functionality: fully functional, machine/vehicle number: Typ Cre, Saw blade sharpening machine – straight grinding – for circular saw blades with a diameter of 80 to 800 mm. A clamping device for band saw blades is available. The operating manual is also included. The machine is in working order and can be demonstrated. Isdpfjza Tl Sox Anwsic

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Iijdpfeyyzqdsx Anwjc Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Iedpfxefym Ewe Anwsic Pneumatic vice and saw feed Stepless. Machine little used in good condition.

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Iisdpfx Astwn E Usnwjc Square max 120 mm X 120 mm

Year of construction: 1993, condition: good (used), Circular saw for aluminum Manual feed Iijdpfezab Alox Anwoc Manual vertical clamp Saw blade diameter up to 350mm The transport trolley is not included!