Used Iemca Round Bar Loader for sale (19,976)

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nedpjzqgikjfx Aa Relf Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2000, condition: like new (used), Brand: IEMCA Model: CNC BOSS 542 / 44 Year 2000 Nlsdpfx Asiqx Uysa Rof Capacity: For bars from 5 to 42mm Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: Nledoy Ndg Hjpfx Aa Rsf - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. Nsdpfsft Ti Tsx Aa Relf The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2000, bar material dia. 5 - 80 mm Bar length 250 - 1.550 mm bar length 1.550 mm longitudinal feed 600 mm height adjustment 775 - 1.175 mm Nsdpfxszkvt Es Aa Rslf dimensions of the machine ca. 2,25 x 1,10 x 1,80 m weight of the machine ca. 0,5 t Bar Feeder SAMSYS - Multisam MUS 2000 - NOT TESTED - for parts

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Nljdpfxozf Nb Ej Aa Rsf

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. Nljdpfx Aozuxm Aja Rof * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: excellent (used), Year of construction: 1989, operating hours: 7,384 h, functionality: fully functional, total width: 1,000 mm, total length: 5,500 mm, total height: 1,650 mm, This machine is designed for the production of wooden posts and stakes with a diameter of 40-140 mm. The length of the processed material is 1.2-6 m. The processing speed is 5-25 m/min. The first milling head has a diameter of 160 mm, and the second has a diameter of 140 mm. The material is clamped pneumatically. Nodpjzcd Agsfx Aa Rjlf

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. Njdpfxezuxwuj Aa Rjlf • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate delivery, unless sold prior to listing.

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Nsdpfozrn Htex Aa Rolf

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to 10 m. Nledpezcgtbjfx Aa Rof

Year of construction: 2007, condition: ready for operation (used), An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026. Nedozgwxzepfx Aa Rjlf

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm Nledpfxozk E Ire Aa Rsf

Condition: like new (used), functionality: fully functional, The machine has undergone a complete overhaul. It features new shafts, bronze bushings, bearings, rollers, rear sprockets, a completely new pneumatic system, a new electrical cabinet, and a feed rate control has been installed. Nsdpfozv Euvsx Aa Relf

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 19115035, type of input current: three-phase, The cylindrical milling machine can be used to produce finished diameters ranging from 40 to 160 mm. The four cutter heads are continuously adjustable and each carries a finishing cutter and a roughing cutter. The drive motor for the cutter head has a power output of 30 kW, and the feed motor has a power output of 3 kW. Nsdpszlhamefx Aa Rolf

Condition: like new (used), Year of construction: 2021, operating hours: 1,211 h, functionality: fully functional, Machine for manufacturing wooden posts and stakes. Processing length: 1.2-5 m. Produced diameters: 40-140 mm. The milling head has 8 knives. Material clamping is mechanical. Processing speed: 5-14 m/min. Nlodpfx Aaozcd Enj Ref

Condition: new, Year of construction: 2026, functionality: fully functional, A machine for beveling wooden posts and poles. Nledpfx Ajy Tx U Toa Rjf Processes diameters ranging from 80 to 200 mm. Cutter head motor power: 2.4 kW. Number of knives: 2.

Year of construction: 2008, condition: ready for operation (used), Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible. Nodpfex S Rbpex Aa Relf

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Nedpfxsy Ax Tuj Aa Rolf

Condition: excellent (used), functionality: fully functional, bar length: 1,615 mm, bar diameter (max.): 80 mm, reverse speed: 1,000 mm/s, overall weight: 580 kg, workpiece weight (max.): 250 kg, The bar feeder was purchased in 2019 and was connected to a DMG Mori NLX 2500 / 700. The bar feeder was hardly used. TECHNICAL DETAILS Connector: Harting Material Cross-Sections Round: 5 to 80 mm Square: 5 to 50 mm Hexagonal: 5 to 60 mm Bar Lengths Bar length: 500 to 1,615 mm Short bar length: 90 to 500 mm Performance Data Magazine capacity: 250 kg Bar changeover time: 30 s Feed rate: 0 to 500 mm/s Return speed: 1,000 mm/s MACHINE DETAILS Connection voltage: 230/400 V Control voltage: 24 V Power consumption: 2 kW Nodpfx Aasy A Rlpo Rjlf Dimensions & Weight Weight: 580 kg Bar pusher travel: max. 1,710 mm Loading axis height: 905 to 1,252 mm EQUIPMENT Short bar kit Handheld control unit Remote control Safety covering Fixed protective grilles

Condition: ready for operation (used), Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible. Nsdpfx Aoy D Tn Aoa Relf

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020849GA07, bar length: 3,200 mm, bar diameter (min.): 5 mm, bar diameter (max.): 51 mm, Very good IEMCA Boss 551E Bar feeder. The Boss is the bar feeder for long bars which has been sold the most in the world with more than 30,000 installed units. The Boss 551 Easy is an automatic bar feeder suitable for lathes with fixed and mobile headstock. Round bars: 5 – 51 mm Hexagonal bars: 5 – 44 mm Nledpfx Ajzlh I Dsa Rsf Square bars 5 - 36 mm Bar length: 3200 mm Max. spindle diameter: 65 mm Remnant length 400 mm Bar changeover time 31 sec. (for bar length 3200 mm) Loader weight: 830 kg Year: 2008

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Nlodpfovi Eypjx Aa Rjf Max. cut length 300 mm

Condition: good (used), Bar length 3000 mm Max bar diameter 65 mm Tubes diameters : 65 mm Dimensions 3900 x 1000 x 1200 mm Nodpfx Aajgvz N Eo Rjlf Weight 1000 kg

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Nljdpjp Du Aljfx Aa Rsf Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm