Used Imes-Icore Milling Machine for sale (67,428)

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Gsdpfx Afsxxb Rrouekc Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Gkodpfx Afox D Tbmsusc Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Gsdpfez Ekkxsx Afuskc Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: good (used), HSC milling machine IMES Icore Premium 4030 µ, with DELTATHERM cooling system. Gedpfsz Icfyex Afuokc

Year of construction: 2015, condition: ready for operation (used), A 5-axis dental CNC milling and grinding machine from imes-icore is offered. A-axis: 360°, B-axis: 115°, axis inclination with 98mm blank: A-axis/B-axis: 30°/25°, max. machining area: 94mm/30mm, blank holder: 98.5mm, workpiece holder: 1 blank, max. spindle speed: 60000rpm, spindle power: 1.0kW, tool holder: 6mm shank, tool changer: 20, tool length measurement: ≤0.002mm, control system: Logosol 5-axis. Machine dimensions X/Y/Z: approx. 758mm/790mm/857mm, weight: approx. 180kg. Inspection by appointment possible. Gkedszklfwopfx Afusc

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Godpfxezuxn To Afuskc Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 Gedpjh S Uhfsfx Afuekc - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm Gkjdpfoz Il Rrsx Afujc T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Gedpfx Asxftqdsfujkc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Gksdpfxez Izdue Afuoc Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: used, Year of construction: 1969, total height: 2,000 mm, total width: 2,300 mm, total length: 2,000 mm, Colour: Grey Empty weight: 3.800 kg - Year: 1969 - Serial number: 9327 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 710 - Table length [mm]: 1520 - Table width [mm]: 385 - Tool holder: ISO50 Gedpfeyzhdmsx Afuokc - Main spindle power [kW]: 11 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine Gkedoy Ni Ivepfx Afuec ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Godpsyahv Ssfx Afuskc Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), Year of construction: 1969, x-travel 700 / 710 mm y-travel 275 mm z-travel 350 mm taper in main spindle ISA 40 table surface area 900 x 250 mm T-slots 3 x 18 x 60 Stk. turning speeds 32.0 - 2000 U/min feed stepless 15 - 750 mm/min voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1400 kg range L-W-H 1000 x 1400 x 1800 mm from a training workshop (vocational school) - in checked conditions - machinevideo - ?v=fKENsjnLZxY Features: Gsdpfxjzkbnzo Afuskc - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles * Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Godpfx Ajzmt U Eefuskc

Condition: good (used), Year of construction: 1995, Milling machine Gjdpfsp Nnp Sox Afuekc

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: Godpfjx Unpvox Afuskc *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Godpsgyw S Tofx Afuekc Table type: universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Gksdoxnvrvepfx Afujc Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Gsdpfxerhzcuo Afuekc

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,250 mm, table load: 2,500 kg, rotational speed (max.): 3,000 rpm, overall weight: 10,000 kg, CNC Heidenhain TNC 530 Maximum spindle speed: 3000 RPM SA 50 tool holder Gksdpsy Nnunofx Afuec Power: 22 kW Tool changer Travel: 2000 x 1000 x 1250 mm Chip conveyor Machine weight: 12500 kg

Condition: used, Year of construction: 1994, functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, table width: 700 mm, table length: 1,800 mm, overall weight: 10,500 kg, Anayak VH 1800 bed milling machine with 4th axis Control system: Heidenhain TNC 415 B 4th axis as a rotary table, table diameter approx. 530 mm Gkjdoypxtaspfx Afuec Tool holder: SK 50 Machine is operational; a test run is possible. However, it is sold without any warranty. Sale by offer/bid. Machine is still connected to power. Overhead crane available for loading.

Condition: used, machine/vehicle number: 46589, This universal tool milling machine with accessories, type: FP2, will be auctioned online as part of our industrial auction / machine auction due to the business closure of Trola GmbH – including machines, workshop equipment, plastic parts, and material handling equipment. Gkjdpfsz Nc Rfex Afujc You can find this and many other items on our platform.

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Gkodpfx Ajz Nx Hwefusc Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Gkedpfx Afjz Nx H Djusc Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T Problem on CNC. Machine sold as it is. (Screen from CNC need to be changed)