Used Jamafa 2Aa8/6 Flower Sorting Machine 7+1 Sortings With Double Infeed Table for sale (128,185)

Condition: good (used), Year of construction: 1974, 7+1 sortingsSorts in 5 cm increments, from a minimum of 17 cm to a maximum of 97 cmThe bins can accommodate products up to 122 cm in lengthThe bins are 15 cm wideFixed speed230 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Hsdpfxsz Rg H Uo Akrjnu Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 1993, Grading roses and other type of flowers by length Hodpoz Rg Hnofx Akrsnu 7 sortingsSorts in 5 cm increments, from a minimum of 17 cm to a maximum of 97 cmThe bins can accommodate products up to 122 cm in lengthThe bins are 15 cm wideSensors in 1 rowFixed speed230 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), - 6 +1 sortings - Sorts in 5 cm increments, from a minimum of 17 cm to a maximum of 97 cm - The bins can accommodate products up to 122 cm in length - The bins are 15 cm wide - Fixed speed - 230 Volt Hjdpfxsz S Snts Akronu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Sorting machine for roses and cutflowers Grading by length 7 sortingsSorts in 5 cm increments, from a minimum of 17 cm to a maximum of 97 cmThe bins can accommodate products up to 122 cm in lengthThe bins are 15 cm wideSensor per sortingFixed speed230 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Hnedpfoz Rhhyjx Akrou The specialist in used agriculture and horticulture machinery

Condition: good (used), With the correct sorting sieves, this sorting machine is also ideal for sorting potatoes, onions and flower bulbs. Machine is equipped with: 6 + 1 sortsOutfeed conveyor for every sortingCompas elevator feeding conveyor with shaking feederSeveral sieves More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Hnjdpfx Aez Rfpuskrou The specialist in used agriculture and horticulture machinery

Condition: good (used), Jamafa rosegrader with 6 sortings Sorting machine for roses and cutflowers Grading by length 6 sortingsSorts in 5 cm increments, from a minimum of 17 cm to a maximum of 97 cmThe bins can accommodate products up to 122 cm in lengthThe bins are 15 cm wideSensor per sortingFixed speed230 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Hjdsz Rg Rmspfx Akronu Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Hnsdpfoz R Rbdex Akrju

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, Hedpjz Eh Nlsfx Akronu spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2013, Format Parts Bottle Diameter : 57,71,76,94,115mm Hsdpfxez Sdrfe Akronu

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Hodpfozq A Ipox Akrsnu

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm Hedpoy Nd Siofx Akrjnu turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Hodozl Screpfx Akrsnu Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Hsdpfx Aksuqw E Njrsnu Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Hjdpfx Aozav D Dekronu Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Hnsdpfx Akjxdmgvoreu Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Perfect double sorting machine with 3 + 1 sortings This jump grading machine could be used for various type of vegetables, such as brussel sprouts, flower bulbs, onions, potatoes and mushrooms. Jump grader with 3 + 1 sortings Width 100 cm (2 screens of 51,5 cm wide x 61 cm long)Can be used as a pre-grader or in combination with a bunker Hjdpfx Akoz N Uzworsnu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding Hnsdpfjuxfu Nsx Akrsu - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: good (used), Year of construction: 1982, With the step sorter, the largest sizes are sorted first. This has the advantage that the large sizes are less influenced by the sorting machine Sieve sizes: exit 1: 2x 100x52cm exit 2: 2x 100x52cmexit 3: 2x 61x52cm exit 4: 2x 61x52cmMultiple flower bulb sieves:52 x 100 cm sieves:2x 2 cm3x 2.5 cm2x 3 cm (1 sieve is a sieve with bars)4x 3.25 cm8x 3.5 cm7x 3.75 cm7x 4 cm5x 4.25 cm4x 4.5 cm5x 4.75 cm52 x 61 cm sieves:2x 0.75 cm2x 1.25 cm2x 1.75 cm2x 2 cm4x 2.25 cm2x 2.5 cm8x 3 cm3x 3.25 cmTwo shock systems: Ensures accurate sorting of different products (2 cams recently replaced) Versatile use: Suitable for flower bulbs, Brussels sprouts, mushrooms, seed potatoes, onions and more – with the correct sieves Conveyor belt outlets: Gentle transfer of sorted product More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Hnedpfoz Rf Anox Akrju See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Hnedpoyyygksfx Akrju Power: 3,200 W

Condition: good (used), Year of construction: 2006, The Aweta G4-14+1 pepper sorting machine is a 4-lane sorting machine for peppers with 14 semi-automatic exits + 1 discharge/oversize exit. The machine generally sorts by weight Main specifications of the version with 12 semi-automatic exits: Type: Aweta G4-14+1 Product: peppers (also suitable for mango, avocado or beef tomato with other cups/rollers) Number of lanes: 4 Exits: 12 semi-automatic exits + return/extra exit Sorting by: weight, size and optionally colour Capacity: approximately 3,500 – 5,000 kg/hour depending on product composition Infeed: singulator with diabolo rollers / cup system Weighing technology: digital Aweta weighing scales Collection: packing tables or roller conveyors possible Voltage: usually 380-400V 3-phase Typical components of the line: Packing table for last 3 exitsSingulator digital weighing scales 12 Semi-automatic packing stationsAvailable from december 2026 * Without feeding system Option:Taks MPL Paletiser with long infeed roller conveyor (number 16252605001) Hnodpfx Akjz Rga Isreu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Hedpfx Aozrg T Eskrjnu Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: good (used), Year of construction: 2009, Greefa MSE 4-lane tomato sorting machine with 14+1 exits Well-maintained Greefa MSE tomato sorting machine, suitable for sorting both standard round tomatoes and Roma tomatoes. The machine is equipped with four sorting lanes, camera sorting and electronic weighing systems at the exits. The sorting line was used at a tomato growing company with approximately 3 hectares of greenhouse production and remained in operation until the end of 2025. Specifications Hedpfez Rgp Aex Akrjnu Brand: GreefaModel: MSEYear of manufacture sorting machine: 2009Year of manufacture V-belt singulator: 20154 lanes14+1 exitsSorts by weight, colour and sizeElectronic weighing systems at the exitsV-belt singulatorConveyor for second-class productSuitable for round tomatoes and Roma tomatoes Components and dimensions Flat low conveyor: 240 x 150 cmElevator to singulator: 240 x 150 cmV-belt singulator: 210 x 150 cmTomato sorter with camera and exits: 1650 x 270 cm Dimensions are length x width. Condition and maintenance The machine is in very good condition and has been well maintained throughout its use. Annual maintenance was carried out by a Greefa dealer in Germany. The machine was used until the end of 2025. After it was taken out of production, another extensive service was carried out with a value of €11,000 excluding VAT. The previous service, carried out on 10 April 2025, had a value of approximately €2,000 excluding VAT. The corresponding maintenance invoices can be provided upon request. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2001, Aweta GMB4-12/1-L pepper sorting machine 4 lanes12+1 exitsDiabolo rollersExits on the leftFinger elevator belt12 digital scales (6 x Cas, 5 x Aweta & 1 x Soehne) More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Hedpfsz Rdl Isx Akrjnu The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 1986, Compas bulb sorting machine 2 x 52 cm With 5 gradings and oversize With conveyor belts to directly fill cubic boxesWith double cam (provides two shocks and more stability), cams replaced 2 years ago Rack with bulb sieves Sieve size 52 x 61 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Hedpfx Aksz Rfv Ijrsnu The specialist in used agriculture and horticulture machinery

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Hodszz Iq Ropfx Akronu