Used Jbt 6 Metre X 600Mm Electrically Heated Fryer for sale (98,340)

Condition: good (used), JBT M Fryer, 6m x 600mm. Fully optioned fryer. Electrically heated, Teflon infeed, sediment removal, touchscreen controls etc. The JBT M Fryer is a high-performance industrial fryer designed for large-scale food production. The M Fryer is used primarily in the food industry to fry various products such as chicken, fish, snacks, and other prepared foods. Dwodpfx Akeud Ry Sjmoc

Condition: used, 6m frying length, 600mm wide, top hold down belt and teflon infeed. Dwjdpfxjyivuns Akmjc

Condition: good (used), JBT M6 6 fryer. electrically heated fryer, 600 mm wide with 6 m frying length. Machine in lovely condition with auto canopy lift, top hold down belt and Teflon infeed. Rare opportunity. Djdpfx Akot Dxwtjmswc

Condition: good (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 4702, stroke rate (max.): 18 1/min, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, operating pressure: 200 bar, overall weight: 5,250 kg, total length: 3,860 mm, total width: 2,500 mm, total height: 1,560 mm, BAYKAL 3100 X 6 Plate Shear - Cutting capacity: 6 mm Dodpfxjz Nftko Akmjwc - Cutting length: 3060 mm FCA D-35614 Aßlar - loaded onto a truck.

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Dodpfezlbqrsx Akmowc Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Dwedpfxjyivr Ts Akmjc

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Dwedpfxsz N H D Dj Akmec Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Djdpfez Izgiex Akmewc Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Dimensions: 2050 x 6 / 4 mm, adjustable cutting angle and cutting gap, rear light barrier. Dwsdpfx Ajz Iv Nfskmsc

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery Dwodpfx Aswiatiskmsc What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Dwjdpfx Ajyzc Iaekmjc Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Djdpfx Aezvddcokmjwc

Condition: good (used), functionality: fully functional, Simple and very robust machine; scope and condition as shown in the pictures; weight approximately 5 tons. Dedpfxoz Hpyhe Akmewc

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine Dwjdpfx Aezwphpskmoc working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 140°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 total thrust: 90 tons automatic opening with timer pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 ability to set separate temperatures for the plates daily programming for automatic turning on the machine heating the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, especially for temperature control of injection molds and other process tools. Dwodpjz N H Dwjfx Akmec Serial No.: 102010690002 Year of manufacture 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min. Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Dodez Iz Tpspfx Akmowc Weight: approx 1 T

Condition: not inspected (used), Year of construction: 2022, load capacity: 2,000 kg, Mobile Portal Crane ABUS LPK Dwodpfxozqfn Es Akmjc IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of Manufacture: 2022 Machine Number: 153-002730 Condition: Uninspected Delivery Terms: Free loading onto truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Payment Terms: Prepayment - by bank transfer Internal No.: 174-2 Technical Data: Crane bridge / crossbeam: approx. 3,280 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Height of running/foot beams incl. rollers: approx. 400 mm Lifting Gear: ABUS Electric Chain Hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically driven chain hoist / load hook (left/right) IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Scope of delivery: Existing documentation as shown in the images Dimensions & Weights: Installation dimensions L x W x H approx.: 3600 x 2000 x 5000 mm Transport dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), functionality: fully functional, spindle bore: 652 mm, Pinacho L1 lathe, model 225 x 1600mm swing, maximum diameter over bed 450mm, over cross slide 690mm, over compound slide 215mm, spindle bore 52mm, 18 speeds 32-1800 rpm, 5.5 hp motor, with steady rest, with quick-change tool post, with various accessories, lathe in good condition. Dsdpfezbzzwox Akmswc

Condition: good (used), Electric fryer direct from European meals factory. Perfect for frying burgers and nuggets. Electrically heated. Top hold down belt. In lovely condition. 4.5m frying length, high power - 305Kw model. Djdpfx Aszkuwpekmewc

Condition: new, Factory-new electrically heated stainless steel mixing vessel with insulation and propeller agitator, including operating manual and CE declaration of conformity. Model: EBB250RWP Alternatively available with other agitator types and in different sizes. Capacity: 250L Approx. dimensions: Ø 595mm x cylindrical height 900mm Total height: 1240mm plus agitator motor Dsdpsyngxnofx Akmswc Material: 1.4301 stainless steel V2A Surface finish: IIIc / 2B Weld seams ground on the inside Max. operating temperature: 110°C Operating pressure vessel: ATM -Upright design on casters -Top: Hinged lid, half bolted, half hinged with removable stainless steel sheet grid as reach-in protection -Bottom: Flat bottom with lateral outlet DN50 DIN11851 and disk valve, EPDM seal -Agitator flange connection on the top cover -2x push handles Propeller agitator: Power: 0.37 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 1,600 mm, turning diameter: 520 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, Pinacho CNC lathe, Taurus-260 x 1500mm, equipped with a Fagor 8055 CNC control. Swing over bed: 520mm, swing over cross slide: 310mm, spindle bore: 80mm, variable speeds from 0-2500 rpm. The lathe features a universal 3-jaw chuck with a diameter of 250mm and a manual quick-change tool turret, and is equipped with a fixed steady rest. All bearings of the main spindle and tensioners have been replaced with new ones. The lathe is in very good condition. Dedpfozmp Etox Akmjwc

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Control eView Dedpjqva Rzofx Akmswc weight of the machine ca. 7,2 t CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Condition: new, Factory-new electrically heated stainless steel mixing tank, insulated, with propeller agitator, including operating manual and CE declaration of conformity. Model: EBB150RWP Also available with alternative agitator types and in other sizes. Dwodsym Uclopfx Akmec Capacity: 152 L Approximate dimensions: Ø 660 mm x cylindrical height 625 mm Total height: 910 mm (+ agitator motor) Material: 1.4301 (V2A) stainless steel Finish: IIIc / 2B Weld seams ground Maximum operating temperature: 110°C Operating pressure (tank): atmospheric -Upright design on castors -Top: Hinged lid, half bolted, half hinged, with removable stainless steel safety grid -Bottom: Flat bottom with lateral outlet DN50 DIN 11851 and disc valve, EPDM gasket -Agitator flange connection on top -2x push handles -1x type plate Agitator: Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3-phase 400 V

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Dwjdsym Arbjpfx Akmjc Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Condition: used, Universal temperature control unit Oil Advanced with electric heating and connections for external cooling Pressurized water temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating SINGLE type STO 1-18-100-D2 Serial No.: 133616 Year of manufacture: 2013 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume 22 liters (internal filling volume) External filling volume max. 86 liters Heating capacity 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply + return DN25 - G 1" Cooling water supply G 3/4" Cooling water return G 1/2" Connection power 24.2 kVA Controller SC type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz, 33.7 Amp. - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) Dwedpez Ebv Esfx Akmjc - Temperature control - For cooling, an external cooling unit or an external cooling circuit is required (cooling is carried out via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers - Supplied without the illustrated connection cable with plug Dimensions L x W x H 1280 x 395 x 1180 mm Weight 226 kg Good condition