Used Jenbacher 616 for sale (203)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Pedpfeytg Rbox Ai Torc Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit - As new - Control cabinet still in original packaging - Located in Genthin We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. Podpfxozazraj Ai Tjrc It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: excellent (used), Year of construction: 2012, operating hours: 95,000 h, functionality: fully functional, machine/vehicle number: Vers. J18 (adattato F12), fuel type: gas, power: 2,651 kW (3,604.35 HP), output voltage: 6,300 V, output frequency: 50 Hz, nominal power: 2,714 kW (3,690.01 HP), Currently operational until June 2026. Longblock replacement performed during major overhaul (68,000 operating hours). Upon disassembly, a minor overhaul will be required. Regularly maintained and covered by the supplier’s preventive and corrective service contract. The system is complete with: - heat exchanger for steam production (Siat 1,168 kW); - SEA transformer, 6,300 --> 21,000 V. Dia.Ne version: XT 3. Prjdpfx Aijrdx Dds Tec

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Podpfsz Ehc Eex Ai Torc Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 1455607, fuel: liquid petroleum gas (LPG), Jenbacher JMS612 in a container Electrical output: 2004 kW Pjdjztw Naspfx Ai Torc Thermal output: 2244 kW First commissioning: November 30, 2020 Operating hours: 14,800 h Condition: Like new System is still in operation. Full maintenance contract was in place until recently. Includes flue gas cleaning system (suitable for horticulture).

Condition: used, mileage: 613 km, power: 5 kW (6.80 HP), first registration: 07/1989, fuel type: diesel, overall weight: 500 kg, color: blue, gearing type: mechanical, suspension: other, operating hours: 613 h, Year of manufacture: 1989. 13.5 kW, 613 operating hours, 2,800 rpm. Airflow rate: 2.1 m³/min. Fitted with a Deutz engine, highly soundproofed, complete with hoses and hammer set. Permissible total weight: 500 kg. FOR US, CONDITION AND A GOOD FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the provided number. //EXCHANGE, TRADE-IN, OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee. Further offers can be found on our homepage. The description and listed data do not constitute a guaranteed specification and are not legally binding. The only binding agreement is the purchase contract made at our dealership upon buying the vehicle. Subject to errors and prior sale! Prsdpfx Aiex Upngj Toc

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS Prjdpfx Aozwpnpji Tsc hours: 84,000 hours overhaul at 60,000 hours. Year: 2008 Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Condition: used, Year of construction: 2008, operating hours: 110 h, functionality: fully functional, power: 834 kW (1,133.92 HP), fuel type: gas, Jenbacher J316 Bio Gas generator containerized set - Manufacturer: Jenbacher - Model: J316 - Hours 110k Prsdpfx Aiey S Ttbe Tjc - Year of Manufacture: 2008 - Rated Output Power: 834 kW - Frequency: 50 Hz - Alternator: Stamford New alt installed 2017 -XT4 New turbo installed 2k hours ago. Contact for more info.

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: Jenbacher, NEW power plant equipped with a reconditioned generating set; two units available immediately. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 15 G2P NGS with containerized Jenbacher JGS 420 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Drawings and engine data sheets are available. Podoz D H Hajpfx Ai Terc Option to switch to the EGHE 200°C + by-pass configuration. Further customization options are available and can be discussed.

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, NEW power plant equipped with a refurbished generating set; two units are immediately available. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 10 G2P NGS with a containerized Jenbacher JGS 320 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Prjdpfx Asz D H Dlei Tjc Drawings and engine data sheets are available. Option to switch to the EGHE 200°C + bypass configuration. Further customization can be discussed.

Condition: used, Year of construction: 2020, KWe: 1222 Prodpjym Rnqjfx Ai Tjc Working hours: 29000

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Psdpfx Aiewd Nw To Torc Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01013115, overall weight: 15 kg, color: green, output voltage: 250 V, type of output current: DC, number of cylinders: 24, ambient temperature (min.): 18 °C, ambient temperature (max.): 65 °C, The MIC950 version C is a state-of-the-art ignition controller designed to optimize the performance of Jenbacher gas engines in the most demanding industrial applications. Thanks to its advanced architecture, this unit ensures precise ignition control, improving energy efficiency and reducing emissions. Additional uncategorized technical details: Predpfx Aijwtmltj Tsc Minimum input voltage: 18 V DC Maximum input voltage: 32 V DC Nominal power: 24 V nom. Output voltage: 250 V DC Minimum temperature: -13°F Maximum temperature: +149°F Compatibility: Jenbacher series 2, 3, 4, and 6 Availability: 173 units in stock

Condition: used, Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, Full trigeneration plant with York absorption chiller. Regularly maintained and covered by the supplier’s preventive and corrective maintenance contract. Major overhaul performed in 2021 at 61,000 operating hours. New Long Block (LB) supplied by INNIO on the occasion of the major overhaul, documentation available. • 87,670 plant hours; Prsdpfsy Ibldsx Ai Tec • 26,904 engine hours; The crankshaft has not been machined, while the engine block has been machined for the use of oversized liners. Overhauled alternator, report available. Price and further information available upon request.

Condition: excellent (used), functionality: fully functional, fuel type: gas, output frequency: 50 Hz, motor manufacturer: Jenbacher, JGS 620 / 624 GS-N.L units are available, including refurbished units, in both generating set configurations (non-containerized) and containerized versions, with NEW containers and NEW accessories and fittings. Further customizations can be discussed. Prodpfx Aioy Uk Dpe Tec

Condition: ready for operation (used), Year of construction: 1998, operating hours: 72,000 h, functionality: fully functional, fuel type: gas, color: green, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, type of cooling: water, Available complete Jenbacher 320 power plant with 72,000 operating hours. The engine is from 1998. An overhaul was performed at 42,000 hours, after which the maintenance schedule has been closely followed. It was shut down running at full load (1MW) without any issues. All auxiliaries are included except for the transformer and circuit breaker. Prsdpfx Aoytq Hgsi Tjc

Condition: reconditioned (used), functionality: fully functional, overall weight: 2,000 kg, shaft diameter: 175 mm, length (extended): 4,418 mm, motor model: J624GS-F, Crankshaft J624, overhauled and ready for installation. Features connecting rod journals at a nominal size of 175 mm and main bearing journals machined to 194.5 mm (compared to the standard 195 mm) to ensure uniform fits. Hard chrome plating has been applied to journals N4 and N5 to restore dimensions and ensure surface smoothness. The component has undergone thorough inspections to guarantee proper functionality during installation. Technical Specifications Type: KURBEL Podpjxu Atasfx Ai Tjrc Engine: J624GS-F Length: 4,418 mm Main bearing diameter: machined to 194.5 mm (standard 195 mm) Connecting rod journal diameter: 175 mm

Condition: good (used), Year of construction: 1995, Engine: JGC312 with 551 kW (year 1995) - Turbocharger overhauled 4,000 hours ago - Additional oil cooler – 3 years old - Cylinder head – new in 2017 - Charge air cooler overhauled 4,000 hours ago - Exhaust manifold – new in 2021 Psdpfx Aiovcm Nfe Tjrc - Complete engine overhaul in 2017 Offer is made without guarantee of availability.

Condition: excellent (used), functionality: fully functional, Handtmann VF616 Filling and Portioning Line with Loma Metal Detector and AL Line Complete Handtmann line for filling, portioning, linking, and hanging of meat products, equipped with a Loma metal detector and accessories for use with 200-liter meat trolleys. The set includes: 1. Handtmann vacuum filler with lift for 200 l trolleys Brand: Handtmann Model: VF616 Serial No.: 26190 Prsdpfxexk T Iyj Ai Tec Year of manufacture: 2009 Power supply: 400 V, 3 Ph, 50 Hz Current consumption: 17.3 A Power: 12.0 kW Vacuum pump: Busch, type KC 0016 E Vacuum pump serial no.: V19220646 Performance: 19 m³/h Dimensions: 1900 × 1350 × 2120 mm 2. Stainless steel meat trolley Capacity: 200 liters 3. Loma pipeline metal detector with Handtmann linking attachment Brand: Loma Detector type: IQ² Serial No.: MHPLEU-36885 Date of manufacture: 21.10.2004 Power supply: 230 V, 1 Ph, 50 Hz Current consumption: 0.2 A Throughput diameter: Ø 55 mm Handtmann attachment type: 34-5 No.: 13059 Overall dimensions: 500 × 600 × 500 mm 4. Handtmann mobile linking and hanging line Linking machine: Brand: Handtmann Model: 216-21 No.: 1041 Year of manufacture: 2003 Power supply: 400 V, 3 Ph, 50 Hz Current consumption: 3.5 A Power: 2.5 kW Dimensions: 1500 × 700 × 1250 mm Hanging line: Brand: Handtmann Model: 220-16 No.: 1643 Year of manufacture: 2007 Dimensions: 2650 × 550 × 1300 mm The integrated Handtmann system with Loma metal detector is designed for the automatic filling, portioning, linking, and hanging of sausages. The system connects the VF616 vacuum filler with the IQ² metal detector and the linking and hanging module, delivering high efficiency and process precision.

Condition: used, functionality: fully functional, Year of construction: 2002, In good technical condition and fully functional. Year of manufacture: 2002 Psdo Afxf Djpfx Ai Tsrc Pressing force: 1300 kN Maximum stroke: 215 mm Weight of the press: approx. 11,250 kg.

Year of construction: 1997, condition: used, Max. machine speed: 600m/min, min./max. parent roll width: 600mm/1650mm, max. parent roll diameter: 1000mm, max. roll weight: 2000kg, unwind core diameter: 76mm/152mm, min./max. slitting width: 190mm/1200mm, number of winding stations: 6, number of winding stations for slit widths from 600mm: 2, material thickness range for monofilms: 20µm-170µm, laminates: 40g/m²-190g/m², composite materials: up to 200g/m², rewind core inner diameter: 70mm/76mm/152mm. Equipped with shear slitting with upper and lower knives, contact rewinder with individual lay-on rollers, spreader roller, material infeed device, ionization system at the unwinder and rewinder, adjustable guide rollers at the unwinder and edge trim extraction system. Documentation available. Inspection possible by arrangement. Pjdpfx Aez R A Ihji Torc

Condition: used, Year of construction: 2022, Claas Lexion 7600 4WD (Int. No.: 13114 mAL) 433 engine hours 234 drum hours Prsdpe Af Rx Refx Ai Tjc 194 effective operating hours 616 hectares 4WD Mechanical cutter bar adjustment V Channel Auto Contour Front drive XL Dust extraction Cruise Pilot Threshing drum drive, 2-stage Feeder drum, Premium Line Jet Stream 3D Grain meter Grain tank 11,000 L Special Cut straw chopper Straw chopper drive, Premium MAN D2676 engine Automatic climate control Profi Cam Quainmeter Claas Remote Service Telematics Profi, 5 years Automatic documentation, 5 years Comfort seat, air-suspended Work lights, LED Plus Cemos Automatic Cemos Automatic Auto Slope Cemos Automatic Cruise Pilot Cemos Automatic 4D cleaning Cmotion multifunction handle Tilt sensor Communication module CAN Ethernet Gateway GPS Pilot Ready Automatic discharge direction adjustment, straw chopper Rearview mirror, electrically adjustable Hand wash basin Cemos Cruise Pilot Options: Claas cutter bar 5.4m, foldable: €36,000 plus VAT Cutter bar V770, year 2021: €39,000 plus VAT Cutter bar V770 with cart, year 2024: €44,000 plus VAT Cutter bar V930, year 2018, 650 hectares, with cart: €59,000 plus VAT Cutter bar V930, year 2015: €44,000 plus VAT MaxFlex 770, year 2017: €46,000 plus VAT Rapeseed knife, right-hand side, and box: €4,900 plus VAT Rapeseed knife, left-hand side: €3,900 plus VAT Track system: €29,000 plus VAT Financing options starting from 2% are available for used and new machines. This is just an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2022, Wenglor camera inspection system BB1C104 2x BBZK002 16x BBZK004 4x B50M100 2x C50C100 5x Predpox Uqnzefx Ai Tjc C50C110 3x C5PC212 2x

Condition: good (used), Year of construction: 2016, operating hours: 8,749 h, functionality: fully functional, overall weight: 1,250 kg, load capacity: 235 kg, arm reach: 2,650 mm, This is an ABB IRB 6700-235/2.65 industrial robot with an IRC5 controller and an RW6 PC, manufactured in 2016. We would be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: UDPUC Driver RobotWare Base English 888-2 PROFINET Controller/Device 963-1 PROFIenergy 687-1 Advanced Robot Motion 603-1 Absolute Accuracy 988-1 RW Add-In Prepared 606-1 Conveyor Tracking 608-1 World Zones 610-1 Independent Axis 611-1 Path Recovery 612-1 Path Offset 885-1 SoftMove Prjdpfxoz R Rl No Ai Tjc 1180-1 Tool Control 613-1 Collision Detection 614-1 FTP, SFTP and NFS client 616-1 PC Interface 688-1 RobotStudio APP Connect 623-1 Multitasking 624-1 Continuous Application Platform 813-1 Optical Tracking 625-1 Discrete Application Platform 628-1 Sensor Interface 689-1 Externally Guided Motion (EGM) 1341-1 / 1520-1 Integrated Vision Interface 630-1 Servo Tool Change

Condition: good (used), Year of construction: 2017, operating hours: 6,240 h, functionality: fully functional, machine/vehicle number: 6700-112239, overall weight: 1,540 kg, load capacity: 245 kg, arm reach: 3,000 mm, This is an ABB IRB 6700-245/3.00 industrial robot with an IRC5 controller and an RW6 PC, manufactured in 2017. We would be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: VDPUC Driver RobotWare Base English 888-2 PROFINET Controller/Device 963-1 PROFIenergy 687-1 Advanced Robot Motion 603-1 Absolute Accuracy 988-1 RW Add-In Prepared 606-1 Conveyor Tracking 608-1 World Zones 610-1 Independent Axis 611-1 Path Recovery 612-1 Path Offset 885-1 SoftMove 1180-1 Tool Control 613-1 Collision Detection Podpfoz Ipywox Ai Torc 614-1 FTP SFTP and NFS client 616-1 PC Interface 688-1 RobotStudio APP Connect 623-1 Multitasking 624-1 Continuous Application Platform 813-1 Optical Tracking 625-1 Discrete Application Platform 628-1 Sensor Interface 689-1 Externally Guided Motion (EGM) 1341-1 / 1520-1 Integrated Vision Interface 630-1 Servo Tool Change