Used Jeumont Industrie Generator for sale (38,950)

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm Kdedpfx Agsy D Hp Te Asu • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing system and its installation situation before dismantling and to document it for a later reinstallation. Technical data and equipment: • Large-area filtered supply air ceiling approximately 8,100 × 4,500 mm • Filter ceiling divided into two sections across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system as it currently exists on-site Kedpfx Ajz Ikyreg Ajdu Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Its previous use included high-quality surface work, up to and including high-gloss coatings. An inspection of the still assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are to be carried out entirely by the buyer at his own cost and responsibility. The buyer must organize the necessary skilled personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical data has been compiled based on the available documentation, nameplates, and the current condition of the system. Information provided without guarantee. The condition and scope determined during inspection shall be decisive. Selling price: 25,000.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A Kdodpfxjy D Hrzj Ag Aju • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Condition: used,

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 REF: MM6471 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Technical specification: ✅ Manufacturer - CERTUSS Dampfautomaten GmbH & Co. KG, Germany Kdsdpfxszn Rcio Ag Asu ✅ Model - Universal 600 TC FG/LPG. ✅ Serial number - 15716. ✅ Date of manufacture - 2021. ✅ Steam output - 600 kg/hour. ✅ Fuel - LPG (propane). ✅ Electrical supply - 3 x 415 V / 50 hz, 5.66 kVA, 16 A. ✅ Control - automatic, PLC. ✅ Run time - under 200 hours logged, according to the owner. Supplied with chemical dosing and blow-down vessel. Any further water treatment equipment is not confirmed. Located in Cullompton, Devon. Viewing by appointment. Buyer to remove.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 15,591 h, functionality: fully functional, machine/vehicle number: 232346, overall weight: 12,125 kg, fuel type: diesel, 880 kVA generator Kjdpfx Agszckwke Asdu

Year of construction: 2002, condition: good (used), functionality: fully functional, Technical details x-axis 2800 mm y-axis 2200 mm z-axis 800 mm control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min Kedpfx Ao Aa Rlleg Aodu power capacity 18 kW feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 18000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 18,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,750 mm, mount diameter: 220 mm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 1,800 rpm, table load: 75,000 kg, coolant supply: 70 bar, spindle motor power: 1,000 W, workpiece weight (max.): 75,000 kg, feed length W-axis: 1,400 mm, MOBILE COLUMN BORING MACHINE WITH DOUBLE TABLE FPT INDUSTRIE SPIRIT 450 Technical specifications Type: Mobile column boring machine with double table Brand and model: FPT Spirit 450 CNC: Siemens Sinumerik 840D Installation: 2017 Technical data Axis travels: X: 18,000 mm Y: 5,000 mm Z: 1,750 mm W: 1,400 mm B: 360° V: 3,000 mm U: 400 mm Maximum workpiece dimensions: Dimensions of each table: 4,000 x 3,000 mm Maximum machinable height: 5,000 mm Maximum load capacity: 75 tons Positioning accuracy: 0.05 mm Spindle speed: Up to 3,600 rpm with TUPC-M head Normal speed: 1,800 rpm Spindle power: 100 kW Tool types: ISO 60 C.F. ISO 50 ISO 50 C.F. CAPTO C8 Boring bar diameter: Ø220 mm RAM: 650 x 560 mm Accessories and automation 2 rotary-movable tables with dimensions 4,000 x 3,000 mm each. Automatic tool changer for ISO 60 and ISO 50, via a storage and management system with a KUKA anthropomorphic robot. Manual tool changer for CAPTO C8 for the D’Andrea UT5 head. Measuring probe installed on the machine: SONDA PROBE RPM600 (RENISHAW). Coolant and lubrication system Internal and external cooling via cutting fluid: Internal cooling of the boring bar tool: Pressure: 70 bar Flow rate: 80 l/min Internal cooling of the head tools: Pressure: 40 bar Flow rate: 28 l/min External cooling of the tool: Pressure: 4 bar Flow rate: 28 l/min Internal and external air system for cooling the tool when cutting fluid cannot be used. Heads and accessories TU144: Universal roughing head ISO 50, with angular indexing every 2.5°. Maximum spindle speed: 1,800 rpm. TUPC: Universal finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 1,800 rpm. TUPC-M: Universal multiplied finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 3,600 rpm. D’Andrea UT5 head: Head for turning with CAPTO C8 tools. Maximum spindle speed: 251 rpm. ISO 60 spindle: Main spindle. Kdedsz Hl A Eepfx Ag Aju Maximum speed: 1,800 rpm. ISO 50 reduction for finishing: Maximum speed: 1,800 rpm. ISO 50 reduction for roughing: Maximum speed: 1,800 rpm. Long ISO 50 reduction: Maximum speed: 1,800 rpm. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, New Single-head cutting machine OMC GIOBI 600 (year 2021) with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m (year 2025) and inlet conveyor PORTER 4,2m (year 2025) Condition: new, demo machines - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system Kdodpfx Aoy Erwfsg Asu - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Year: 2007 CNC Control: HEIDENHAIN Axis Travels X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes Kdodpfxozznups Ag Aju A-axis: 270° B-axis: -180° / +180° C-axis: 360° The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.

Condition: used, 3-Axis CNC Machining Centre – FOM Industrie ARGO 35 – Year 2002 – 4-Position Automatic Tool Magazine FOM Industrie ARGO 35 CNC machining centre, manufactured in 2002, designed for milling, drilling and slotting operations on aluminium profiles. The machine is equipped with a FOM VISION PLUS CNC control system, managing the three axes X, Y and Z, and a 4 kW electrospindle with adjustable speed up to 12,000 rpm. It also features a 4-position automatic tool magazine, allowing different tools to be used during machining cycles. The machining centre is equipped with 4 pneumatic clamps with manual positioning, a retractable pneumatic reference stop and a micro-drop lubrication system using pure oil. Axis movement is performed through linear guides with recirculating ball bearings, with a rack-and-pinion drive system for the X-axis and recirculating ball screws for the Y and Z axes. Technical Specifications Manufacturer: FOM Industrie Model: ARGO 35 Year of manufacture: 2002 Machine type: CNC machining centre for aluminium profiles CNC control system: FOM VISION PLUS Controlled axes: 3 (X, Y, Z) B-axis: Fixed Tool magazine: Automatic, 4 positions Pneumatic clamps: 4, manually positioned Axis Travels and Working Areas X-axis travel: 3,500 mm Y-axis travel: 985 mm Z-axis travel: 370 mm X-axis working range: 3,550 mm Y-axis working range (spindle at 90°): 607 mm Z-axis working range (spindle at 90°): 351 mm Minimum distance between spindle nose and worktable: 0 mm Maximum distance between spindle nose and worktable: 351 mm Axis Speeds and Movement X-axis rapid traverse speed: 28 m/min Y and Z-axis rapid traverse speed: 25 m/min X-axis acceleration: 2.5 m/s² Y and Z-axis acceleration: 4 m/s² Axis guidance: Linear guides with recirculating ball bearings X-axis drive system: Rack and pinion with backlash compensation Y and Z-axis drive system: Recirculating ball screws Axis position detection: Via encoders Electrospindle Manufacturer: FOM Industrie Spindle power: 4 kW (5.3 HP) Spindle speed: 0–12,000 rpm Speed control: Via inverter Tool holder: ISO 30 – DIN 69871 Spindle torque: 3.2 Nm Cooling system: Forced-air cooling Maximum tool diameter: 220 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Electrical and Pneumatic Specifications Power supply: 400 V, three-phase Ksdpfxs Abluwo Ag Ajdu Frequency: 50 Hz Total power consumption: 7 kW Operating air pressure: 7 bar Air consumption per working cycle: 30 Nl Maximum clamping capacity: 612 mm Overall Dimensions and Weight Length: 5,000 mm Depth: 1,785 mm Height: 2,470 mm Machine weight: 2,200 kg Features and Equipment FOM VISION PLUS CNC control system. Three CNC-controlled axes: X, Y and Z. 4-position automatic tool magazine. FOM 4 kW electrospindle. ISO 30 tool holder. Spindle speed adjustment via inverter. Four pneumatic clamps with manual positioning. Retractable pneumatic reference stop. Fully enclosed spindle head guard. Micro-drop lubrication system using pure oil. Linear guides and recirculating ball screw drive systems. Separate CNC control panel.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 6 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 11,000 mm, total height: 5,430 mm, total length: 16,630 mm, table length: 2,500 mm, table width: 2,500 mm, torque: 2,045 Nm, table load: 40,000 kg, coolant supply: 40 bar, workpiece weight (max.): 40,000 kg, grinding spindle motor power: 46,000 W, rotary table diameter: 2,500 mm, Equipment: documentation/manual, CNC HEIDENHAIN iTNC530 Drive system: SIEMENS SINUMERIK TRAVEL Longitudinal (X): 10,000 mm Vertical (Y): 3,500 mm Cross (Z): 1,500 mm Table (V): 1,500 mm Axis support: Hydrostatic FEED RATES Working feed rates: 0 – 6,000 mm/min Rapid traverse rates for axes Y/Z/X: 25,000 mm/min SPINDLE Ram section: 700 x 500 mm Power: 46/37 kW Rotation speed: 5,000 rpm Torque: 1,691 – 2,045 Nm Morse taper: ISO 50 ATC Number of positions: 100 CLAMPING SURFACE: Dimensions: 10,000 x 2,500 mm Load capacity: 10,000 kg/m² TABLE Surface: 2,500 x 2,500 mm Travel: 1,500 mm Resolution (B-axis): 0.001° Load capacity: 40,000 kg Support: Hydrostatic HEAD Type: TUPC Spindle taper: ISO50 A/C axis: 0.001° Maximum torque: 1,210 Nm Maximum speed: 5,000 rpm Maximum power: 46/37 kW Coolant: Internal, 40 bar HEAD 2 Type: SEELS4 Spindle taper: ISO50 Spindle extension: 400 mm HEAD CHANGING PICK-UP STATION Positions: 3 Maximum workpiece weight: 79.3 kg Machine dimensions: 16,630 x 11,000 x 5,430 mm Year of construction: 2008 ACCESSORIES: - 3-position head changer - High pressure, 40 bar - Filtration system - Chiller - Renishaw RMP60 probe - Blum tool presetter - Electrical diagrams - Perimeter guarding - Chip conveyor - Operation and maintenance manuals Kdjdez Ib Elepfx Ag Asu - CE certification

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 Kdodezb Evlopfx Ag Aou WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis CNC machining center FOM INDUSTRIE FNC 230, year 2023 Condition: excellent, as new Standard configuration: ▪ Electrospindle 5 kW, 18.000 rpm (ISO 30) ▪ 10 location tool magazine on Left of machine base ▪ No. 2 pairs of pneumatic vices with positioning through the travelling column ▪ Left retractable fixed pneumatic stop ▪ Minimum quantity lubrication (MQL) with pure oil ▪ Manual greasing device ▪ Chip and waste collection tank in base ▪ Perimeter guard system. Retractable front door with automatic opening ▪ Control equipment: POWER-I ▪ Movable control console ▪ Handheld control unit ▪ 24” Display ▪ Licence for FST CAM 4 program Ksdpez Ey Uasfx Ag Aodu Option installed on the machine: ▪ PR205562 Tool length measurement and tool breakage detection device ▪ PR205563 X-FLOW (Automatic orientation of lubrication nozzles) ▪ PR205564 Pair of additional vice swith positioning through travelling column ▪ PR205921 SINGLE WORKING AREA 2 PIECES MACHINING WITH X PAL: - LED bar - SW for profile positioning - SW to view machining cycle progress - Device to measure profile length PR205921 - ''Clock'' time calculation module program user license - Right pneumatic fixed stop - Tunnel for oversized profile machining - SW to manage oversized machining operations ▪ PR205571 Lubrocooling with minimum use of water-oil emulsion ▪ PR205574 Rear chip collection tanks ▪ PR205576 Horizontal blade assembly cone with blade Ø 150 mm  ▪ PR205577 Centralised automatic lubrication system ▪ PR202971 Wireless optical bar code and QR code reader, complete with software for importing data compatible with Fom protocol ▪ ZP713706 License module Statistics: version for CNC 4-axis. Software for collecting machine operation and productivity data

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 Kdsdpfxsyv In Io Ag Aju WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit appears to be in new condition. It was only in operation for a short period. Kdjdpfxox U Tgms Ag Aju Our price is €17,000.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1500390, Double miter saw from Fom Industrie, model ALVA 50 A, with a 5-meter cutting length, manufactured in 2026. Equipped with a software license for cutting to specific lengths (extra long and very short) and at variable angles, a software license for displaying profile sections in DXF format, and a label printer. Kedpfx Aez Nghvog Asdu

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1400394, Double miter saw, Fom Industrie BLITZ 60, 6.6 m, year of manufacture 2026. Equipped with a second and third intermediate profile support (pneumatically retractable), automatic profile height gauge with mobile sensor and vertical clamp, pneumatic lift roller on the loading side, central conveyor belt for chip removal, chip conveyor belt with inclined end (6.6 m version), software license for cutting with special dimensions and at variable angles, and label printer. Kdsdsz Ngh Nepfx Ag Aeu

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R05119, Electronic measuring roll line from Fom Industrie, QUOTA GB ALU model, 4.2 m long, for aluminum glazing beads, manufactured in 2026. Supplied with measuring rod, Bluetooth receiver, and a stand with charger. Ksdpfx Agez Ngige Asdu

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min Ksdpfx Aszbnr Aeg Aedu TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 730 kg, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Maximum reach between axis 1 and axis 6: 1,000 mm Repeatability according to ISO 9283: ± 0.03 mm Rotary unit Maximum rotation angle: 350° Safe positions: 0° / ± 90° / 180° Drive unit Maximum rotation speed: 16.8 °/s Maximum travel speed: 0.6 m/s Platform positioning accuracy: ± 10 mm / 1° Drive type: Differential drive Navigation: based on laser scanner data Average surface pressure on the ground: max. 10 N/mm² MACHINE DETAILS Wrist protection class: IP67 Arm protection class: IP65 Total system protection class: IP20 Battery capacity: 5.8–8.7 kWh Compressed air tank: 0.75 l Compressed air pressure: 7 bar Power supply: 1 × 230 V / 16 A Dimensions & Weight Dimensions without robot arm (W x H x D): 890 × 1,120 × 1,000 mm Kdedez Im S Ropfx Ag Aju Weight: 730 kg Interfaces: WLAN, LAN, Fieldbus Multi-coupling: Compressed air, power supply, 2 × Cat5e, 26 × 1 mm² contacts EQUIPMENT Storage station for 4 tools Tool changing system MPS032 3 laser scanners with 360° monitoring range Height of the personnel-safe scanning plane: 150 mm 4 LED units Storage space for up to 16 audio files

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Kdodpfx Agow U N Dae Aeu

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, type of cooling: water, total width: 1,050 mm, total length: 2,700 mm, total height: 1,430 mm, fuel: diesel, overall weight: 1,400 kg, continuous power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 7,100 cm³, warranty duration: 12 months, noise level: 70 dB, fuel tank capacity: 135 l, tank capacity: 80 l, protection type (IP code): IP23, nominal power: 16 kW (21.75 HP), nominal power (apparent): 20 kVA, fuel type: diesel, color: yellow, output voltage: 400 V, output current: 144 A, output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Ricardo R6105AZD, Equipment: documentation/manual, Generator set | Emergency power | RTE100 | 100 kVA | Diesel | Silent | 2026 | NEW | 230/400 V | ATS | Battery charger The RTE 100 kVA diesel emergency generator set provides 100 kVA or 80,000 watts for the stationary emergency power supply of industrial plants, commercial enterprises, agricultural operations, public facilities, and buildings with high requirements for supply reliability. The sound-dampened, water-cooled generator automatically or manually takes over the power supply in the event of a power failure. The generator set is powered by a robust Ricardo R6105AZD diesel engine – a British engine brand with over 100 years of experience in building engines for vehicles, trucks, and ships. The generator provides 400 V three-phase power with 144 A at 50 Hz. The 135-liter tank enables a runtime of up to 8 hours at 75% load (consumption approx. 17 l/h). The integrated ATS module automatically switches to generator operation in the event of a power outage. In addition, 2 × 16 A (230 V) and 2 × 32 A (400 V) sockets are available. The generator set is designed for stationary use with a fixed connection – the reliable backup for companies where downtime becomes expensive. Kjde Aaf Unjpfx Ag Ajdu The generator comes with a 12-month warranty, and spare parts are available at all times. It is a new product in its original packaging. If you have any questions or specific requirements, we are always happy to assist you – write to us or call us directly. Technical data Manufacturer: RTE Model: Diesel emergency generator set 100 kVA Type: Sound-dampened, water-cooled Power: 100 kVA / 80 kW Voltage: 400 V, 3-phase Engine: Ricardo diesel engine R6105AZD Frequency / Speed: 50 Hz / 1,500 rpm Mains changeover: ATS module integrated Battery charging: Charger integrated Sockets: 2 × 16 A, 2 × 32 A (230 / 400 V) Fuel tank: 135 liters Runtime: up to 8 hours at 75% load Manufacturer's warranty: 12 months Fuel: Diesel

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: A2000006, CNC machining center for aluminum window profiles, Fom Industrie FMC 475, with 5 controlled axes and a 7 m working length, manufactured in 2026. Options: Cut & Separate module with a mechanical keyboard and printer, 300 mm saw blade, barcode scanner with data import, UPS, and tool set A2 / HSK F63. Kdodsz Nghpjpfx Ag Aju

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 5,000 kg, drive type: Keine, Mast type: None Kjdpsz Svr Aofx Ag Ajdu Technical condition: very good