Used Joema Beam Saw Clt for sale (9,601)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm Hodpfscbq Nwjx Ab Nenl determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Machine no.: 211.178 Year of manufacture: 1998 With front and rear feed Technical data Saw length 4200 Pusher 4100 Setup 7×10 m (length×depth) Lifting table 6.5 tonnes Hnjdpfjxf Idxjx Ab Nel

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Hnsdpfey Nk Dfox Ab Nsl Second flexible pusher: yes

Condition: new, Year of construction: 2021, functionality: fully functional, The kappa automatic 80 boasts the most powerful sawing performance in its class. This model clearly distinguishes itself from the competition with its solid pressure beam, steel material pusher, and durable, high-quality machine construction. High-end cut edges, maximum precision, and exceptional repeatability are the result of this philosophy. The newly developed saw carriage of the kappa automatic features a cut direction against the fence. The newly designed control panel with a 24" monitor, the cut direction against the fence, and the 77 mm saw blade projection are standard features of this machine. Ergonomic control panel with 24" monitor. The new saw carriage features a cut direction against the fence. The carriage runs smoothly and quietly at feed rates of up to 100 m/min. Hnsdpfxey Nc Tlo Ab Njl

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Hjdpfjwuz Dyox Ab Njnl Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Hodpfx Asiiiuyeb Nenl Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Hsdpfx Abotxirfj Nenl

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Hnedoygtbmjpfx Ab Nel Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Hedpfx Abju Rv Uqe Nonl Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Hnedpfxewuck Is Ab Njl Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Hnsdpfxjwuucio Ab Nsl Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: excellent (used), Year of construction: 2007, I sell the panel beam saw HOLZMA HPL380/38/38. Year 2007. Cutting size 3800x2200mm + back loading table. Cutting height 90mm. Max saw blade diameters 380 + 200mm Total area covered W.5924mm x D.9963mm 8 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. Cadmatic 4.1 optimising software included. Hsdpfxjyybi Ts Ab Nenl Very good condition. Available immediately.

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, Hnedpfxjyu N Rgo Ab Nol max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: like new (used), Year of construction: 2004, I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Cutting size 3200x3200mm. Cutting height 85mm. Max saw blade diameters 350 + 180mm Hnedpfx Asppwtvjb Nol Main motor 11kW Scoring motor 2,2kW Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer Hnsdpfoyrqrtsx Ab Nel ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: excellent (used), functionality: fully functional, Cross-cut multi-blade saw for the production of squared timber and turning blanks Hnjdpjych N Dsfx Ab Njl

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT Hsdpfxsimr Ico Ab Nsnl With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Hnedpeh Imvhjfx Ab Nol Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Hnodpfxju A R D Do Ab Nsl Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Hnjdpfx Ajfg Ewzob Nol Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Hodpfx Aemt Hhweb Nenl Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: used, transport rails; various roller rails; rollers mounted on rails; support rollers; roller rail; small-roller rail Hnodeq E Rybepfx Ab Nel

Condition: like new (used), Year of construction: 2012, Longitudinal profiles for double-sided processing Toothed transport chains for secure wood transportation Solid wood planks, castle planks, plank flooring Current wood width approx. 260 to 660 mm Current wood height approx. 15 to 85 mm Chip removal per side up to 50 mm 2 milling motors 7.5 kW each right Hodpfx Asduw Auob Nenl 2 milling motors 7.5 kW each left Feed gear motor 3.0 kW Condition: very good

Condition: used, heavy duty roller conveyor for buffering laminated beams Hjdpfx Aek Iuglsb Njnl or as a heavy-duty roller conveyor from length 6 m up to a length of 84 m >also suitable for steel transport etc

Condition: excellent (used), working platform machine platform Length A.....3400mm Length B.....1470 mm Width..... 800mm Hnodpfxjim Ec He Ab Nsl Standing height 920 mm