Used Jung Surface Grinding Machine - Horizontal for sale (79,321)

Condition: ready for operation (used), JUNG D22 Internal cylindrical & surface grinding machine - Machine suitable for internal cylindrical and surface grinding - Smallest bore to be ground: 14 mm - Largest bore that can be ground: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece speeds: 46 - 270 rpm - Spindle head / Swivels to the right and left, each by 30 degrees - Distance from the spindle axis to the center of the table: 250 mm - Largest distance / Workpiece spindle - grinding support: 935 mm - Work table / Tilts forward/backward, each by 5 degrees - Automatic and manual operation Nlsdpfx Aceztl Rro Djh - Steady rest - Three-jaw chuck - Replacement grinding spindles (see photos) - Coolant system Dimensions: L x W x H 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm grinding width 200 mm Nedezbczropfx Ac Djlh

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Njdpfx Ajzuxt Asc Dslh Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1984, Second hand tangential grinding machine Brand: Txurtxil Model: NX Machine serial number: 1984 All automatic movements, including Z axis. Characteristics: Grinding capacity: 600x300mm Magnet table dimensions: 500x200mm Nsdpforfwzljx Ac Dslh Power: Three phase 380V Total power: 7CV

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Jung JF 520 D year of manufacture 1988 magnet 500 x 175 mm max. grinding area 600 x 220 mm variable speed variable magnetic field strength automatic start Nledszba Ngepfx Ac Deh diaform coolant/filter tank 3 x flange 1 x clamp documentation machine is powered on for inspection

Condition: used, Year of construction: 1991, grinding length: 500 mm, grinding width: 200 mm, Jung JA500-E Nedpfsy Iy Uksx Ac Dolh 1991

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Njdpfozg Iqnjx Ac Dolh

Condition: used, Year of construction: 1990, grinding length 600 mm grinding width 375 mm Nljdpjy Tpqrofx Ac Doh workpiece height 350-375 mm

Condition: good (used), Manufacturer: JUNG Stock number: 3018 Year of manufacture: Nsdew Apm Sspfx Ac Dolh Machine number: 4985 Type: HF 50 RD Grinding length: 500 mm Grinding width: 200 mm Clamping area table: 700 x 200 mm Magnet: 450 x 175 mm Max. table–spindle distance: 350 mm Table longitudinal travel: 1 to 24 m/min steplessly adjustable Table cross travel: 0.2 to 8 mm steplessly adjustable, automatic Grinding head vertical adjustment: 0.001 to 0.01 mm automatically adjustable Spindle speed: 1,000 to 4,000 rpm Grinding wheels: 225 x 20 x 51 mm Connection: 4.7 kW Accessories/Equipment: Diaform device, Heidenhain display for one axis Condition: Good Weight: 1.55 t Dimensions: 1,700 x 1,600 x 2,000 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The machine is in good working order. See the video. Nlsdpfxszimgyo Ac Doh

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 600 mm table surface area 1360 x 590 mm feed x-axis 30 - 30.000 mm/min feed y- axis 1200 mm/min Feed z- axis 1500 mm/min. stroke of the table 1200 mm Nlsdpfx Aoz Icr Tec Dsh spindle diameter 60 mm grinding wheel size 400 x 100 x 127 mm spindle speeds (infinitely variable) 1000 - 3500 U/min weight of the machine ca. 6,5 t dimensions of the machine ca. 4,10 x 3,70 x 2,85 m

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1054, grinding length: 400 mm, grinding width: 150 mm, Table length: 400mm Table width: 150mm Maximum cutting length: 400mm Maximum grinding width: 150mm Njdjr Eq U Sepfx Ac Djlh Maximum workpiece weight: 75kg Distance spindle to table: 400mm Table speed 1-24 m./min. Sharpening stone diameter: 25mm Spindle speed: 900 – 4500 rpm. Year of construction: 1979

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t Njdjgbgawopfx Ac Djlh table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW coolant pump 0,09 kW total power requirement ca. 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed

Condition: ready for operation (used), functionality: fully functional, grinding length 500 mm grinding width 200 mm workpiece height 250 mm table surface 600 x 200 mm grinding wheel dimensions 225 x 20 x 51 mm grinding spindle drive 1.5 kW table feed 1 - 20 m/min total power requirement 2.6 kW machine weight approx. 2 t machine dimensions approx. 2.6 x 1.6 x 1.8 m Nljdpfx Aez Aynwsc Djh

Condition: good (used), functionality: fully functional, SINUS – Magnet by JUNG model HF 50 RD Width x Depth: 450 x 175 mm Pitch: 9 mm Nlodpjzt Sx Nofx Ac Dsh

Condition: good (used), functionality: fully functional, - Brand: JUNG - Model: FD3 surface grinder - X-axis travel: 500mm Nsdpfxe Aa Dlxs Ac Delh - Y-axis travel: 200mm - Hydraulic feed for X-axis - Automatic feed for Y-axis - Max. grinding wheel diameter: 220mm - Dust extraction system - Complete with attachments and grinding wheels.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Due to its small footprint, it is also suitable for small workshops. Nodpfx Acjz E S Hbj Dslh Grinding length: 300mm Cross travel: 170mm Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Location: 5023 Salzburg.

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website. Nljdpfxjz Agz Ro Ac Deh

Condition: good (used), Year of construction: 1990, Year of manufacture: 1990 Control type: CNC Grinding length: 600 mm Grinding width: 200 mm Workpiece height: 375 mm Table load: 100 kg Grinding wheel dimensions: 250x25x51 mm Operating speed: 1-24 m/min Speed: 4200 rpm Drive motor: 5 kW Total power consumption: 7.5 kW Nledpei Hn U Uofx Ac Djh Machine weight: approx. 3.2 t Space requirement: approx. 3.7 x 2.1 x 2.1 m

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Nledpfx Acsz Rqk Rs Djh Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: good (used), functionality: fully functional, Jung F40 Nljdezbbklepfx Ac Doh sinusoidal magnet, 300 x 150 mm cooling water tank 9x grinding disc documentation the machine is powered on for inspection.

Condition: defective spare-parts repository (used), Year of construction: 1981, functionality: not functional, machine/vehicle number: 1661, The machine is defective. Nledpfxjzcpx Hj Ac Deh The machine body and some of the attached components are in good condition. The machine will be sold as is, from its current location. Price upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Nedpozmhknefx Ac Delh Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: defective spare-parts repository (used), Year of construction: 1997, grinding length: 880 mm, grinding width: 510 mm, grinding wheel width: 100 mm, spindle speed (max.): 4,300 rpm, overall weight: 7,500 kg, power: 26 kW (35.35 HP), Surface Grinding Machine Nlsdpfxowwl N Se Ac Deh Manufacturer: JUNG Model: C 740-E Year of manufacture: 1997 Control system: Siemens Technical specifications: - Grinding length: 880 mm - Grinding width: 510 mm - Max. speed: 4,300 rpm - Grinding wheel diameter: 210 – 400 mm - Grinding wheel width: 100 mm - Total power requirement: 26 kW - Machine weight: approx. 7.5 t The machine is untested and is offered as a source of spare parts! Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, grinding length: 450 mm, grinding width: 200 mm, power: 1.5 kW (2.04 HP), input voltage: 200 V, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-250M Year of manufacture:1981-10 Maximum grinding width: 200 mm Maximum grinding length: 450 mm Maximum table length movement: 500 mm Maximum table length movement: 250 mm Nodowvga Nopfx Ac Dolh Table movement per handwheel revolution: 6 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP 1.5 kW 4P 200V 3 phase Weight, approx. 1050 kg