Used Kövy Ka-S for sale (69,534)

Condition: used, Year of construction: 2014, machine/vehicle number: 837, Equipment: Ljdpfxoz D Trij Amvsag - 1 dough divider (Fortuna, Primus K6) - (Year of manufacture: 2014) - 1 plank stacker (Kövy, DEA) - (Year of manufacture: 2018) - 1 proofing cabinet for cooling the dough pieces (without a cold storage room)

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Ljdpfoyxxxvjx Amvsag - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, Lsdezkmqzopfx Amvjag glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,705 mm, travel distance Z-axis: 250 mm, input voltage: 34,000 V, table length: 3,700 mm, table width: 2,050 mm, operating pressure: 4,150 bar, total height: 3,900 mm, total length: 5,700 mm, total width: 2,550 mm, overall weight: 11,000 kg, product height (max.): 250 mm, For sale is a CNC 5-axis hydro abrasive waterjet cutting system, C.M.S. Tecnocut, including: - CNC Z-axis with 250 mm stroke - Automatic chain conveyor Lodpfx Amoz Atbdsvoag - Abrasive feed system - Electrical system and control cabinet - Reel for water and air - Automatic metering of cutting sand with vacuum monitoring - Additional control panel (manual control) - Automatic central lubrication system - Cooling unit for electrical equipment - Osai CNC control - 34 kW high-pressure pump, Greenjet, 4150 bar, 5 ltr./min. - 5-axis: X 0 to -638 mm / Y 0 to -1028 mm / Z 350 to -100 mm, stroke 250 mm - Programming software TC 2020 - CNC-controlled lathe, R-axis, /min, internal diameter 40 mm / max 200, length 2930 mm / max weight 400 kg - Anti-collision sensor - AWJ anti-reflection plates, spacing 70 mm - Laser for zero point determination - Spray device for cutting head Without warranty, as is, self-removal + shipping Immediately available More pictures to follow -

Condition: good (used), Year of construction: 1995, Multi-blade saw in very good condition. Laedezlk Umspfx Amvsg Chain width: 350 mm, with spikes. Maximum cutting height: 120 mm. Motor power: 22 kW.

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen Ledoz Dxr Iepfx Amvjag

Condition: used, Drycooler Cabero Lodpfxoyrnnro Amvoag -Type: S-GC/DED 095 KA/2X4E -Number of fans: 8 x 910 mm -RPM: 510 -Dimensions: 6100 x 2360 x 2450 mm -Volume: 127.15 L -Quantity in stock: 4 -Condition: Used in very good condition, ready to work

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 28352, overall weight: 850 kg, Number of heads: 6 needles Colours: 12 Embroidery area depth: 500 mm Embroidery area width: 400 mm Equipment includes light barrier, cross line laser on one head, 6x cap drive, 1x cap frame clamping aid, 12x cap frames (360 mm x 70 mm), 1x border frame, 1x standard fixing clips for border frame, 1x table top. Laedpsyvi I Aefx Amvsg

Condition: used, Year of construction: 2007, Machine: Kematec Sekam 1AF/EA Sparkling wine capsiling Sekam 1AF/EA Laodpsz Abiijfx Amveg

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors) Laedpfx Amsztpw Njvog

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: 27994, 12-needle universal portal embroidery machine for single motif and border embroidery as well as tubular goods and cap embroidery, complete with full machine equipment for ready-to-use operation: Control unit: T8 operating panel Thread trimmer: integrated Embroidery speed: max. 1,000 stitches per minute (standard); max. 1,000 stitches per minute (cap) Number of embroidery heads: 4 Number of needles: 12 Head spacing: 400 mm Embroidery area: 405 x 300 mm (tubular goods); 500 x 1,600 mm (border); 70 x 360 mm (cap) Embroidery depth: 500 mm Power supply: single-phase AC 230 V, 50 Hz Basic machine price includes: Thread trimming unit Light barrier Cross laser Ljdpfx Ajyvuxmjmvjag 4 x cap frame drive 1 x cap device 8 x cap frame windows 360 mm / 270° 1 x border frame 1 x standard mounting clips for border frame 1 x table top

Year of construction: 2013, condition: good (used), industrial machine, K. Schulten KS AluKap DUO, designed for the production of armored roller shutters. The machine was manufactured in 2013. It has two automatically fillable containers for armor plating. Technical data: Laedpfx Ajz Dftlemvog - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap DUO - Year of manufacture: 2013 - Machine No.: K 0132 - Maximum armor width: 3500 mm - Minimum armor width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 160 l/min - Pressure of the pneumatic system: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, good The machine is available for immediate pickup.

Condition: used, Year of construction: 2004, Overview This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data - Manufacturer: Robino & Galandrino - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles - CE marked Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops Lodpfx Amjz Dtndjvsag - Bottle infeed and discharge handling with star wheels and guide rails Condition Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Lasdpfeyffqqsx Amvog Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: used, Drycooler Cabero Lodjytp T Sspfx Amvoag -Type: S-GC/DED 095 KA/2X4E -Cooling capacity: approx. 350-400 kW -Number of fans: 8 x 910 mm -RPM: 510 -Dimensions: 6100 x 2360 x 2450 mm -Volume: 127.15 L -Quantity in stock: 4 -Condition: Used in very good condition, ready to work

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers Lodpfx Amjzzz N Heveag - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Year of construction: 2013, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0445-30/100x4 AA-2, Four-stage cascade system for separating ferrous materials Working width: 1000 mm 4 magnetic drums 4 vibrating troughs Base frame Ledpjz Ap Rbefx Amvsag As new, immediately ready for use Test run/trial with material possible by arrangement.

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Lodpfx Amez Aquhevsag Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, Year of construction: 2017, Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data - Manufacturer: Jakü - Model: EGA-CARBO - Year of manufacture: 2017 - Machine type: deaeration and carbonation unit for water - Capacity: 120 - 12,000 l/h - Components: water, CO2 - Electrical supply: 400 V, 50 Hz - Installed power: 16 kW - Rated current: 50 A - Operating hours: approx. 1,500 h Equipment - Vacuum deaeration of the water - CO2 carbonation with manual CO2 dosing - Two vertical stainless steel vessels - Pumps on a stainless steel base frame with adjustable feet - Stainless steel control panel with push buttons, indicator lamps and digital displays Condition Used, approx. 1,500 operating hours. The unit is already out of service and ready for collection. Lasdpjz A Dbrsfx Amvsg Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 2006, Like new, barely used. Lasdpfszyln Dox Amvsg

Condition: excellent (used), Year of construction: 2004, Multi-blade saw Raimann ProfiRip KR 310 M (2 movable flanges) with package crosscut saw HOLTEC ES 121SHKA and Hurrican extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished 2022) Multi-rip saw with 2 adjustable saw blades Technical details: Track gauge: 340 mm Total passage width: Maximum 950 mm (instead of 800 mm) Cutting height with/without pressure plate: 115 mm / 130 mm Workpiece length: Minimum 450 mm Maximum saw blade diameter: 380 mm Minimum saw blade diameter: 250 mm Saw blade bore: 80 mm Saw shaft diameter: 65 mm Saw shaft speed: 3,900 rpm Motor: 30 kW Laser guides: 3 units Operating pressure: 6 bar Ljdpoz Altfjfx Amvsag Infinitely variable feed speed: 8–48 m/min Feed motor: 1.5 kW Voltage: 400V / 50Hz

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm Laedpfotwv S Nox Amveg - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: used, Year of construction: 1997, machine/vehicle number: 800.167, Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 8000 working direction: rotating turret Working type: fullautomatic Lodez Ar Szspfx Amveag amount of capping heads: 8 electrical power supply kW: 5

Condition: good (used), Year of construction: 2007, CPU boards for injection molding machines Lasdjzl Tv Tjpfx Amvsg Arburg Multronica Boards manufactured approx. 2007 Available: 3 units

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Designation: ZLSM-5x1.20-1x3.10-07.72-2-F The drying chamber was designed for drying wooden pallets. Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Heating capacity per chamber: 400kW The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. The drying chamber is sold as defective and incomplete. Laodpfxszyk D De Amveg Inspection is absolutely necessary!