Used Kalmeijer Bread Line (Bread Production Line) for sale (22,108)

Condition: used, Brand: Subal Model: T20 Year of manufacture: 2010 Compliance: CE standard Integrated equipment: - Automatic dough divider-rounder Hjdpfx Amoym Uk Aogsn - Intermediate proofing station - Horizontal moulding machine - Optional small bun cutting up to 50 g Performance & Production: - High productivity for bakeries and industrial workshops - Automated operation for optimum time savings - Consistency and precision in moulding Ideal for: Industrial bakeries Large pastry shops Bread production facilities

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + proofer, manufactured in 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 60–120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4-row • GEK pre-fermentation cabinet, suitable for the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor Hodpfxey St U Se Amgsn • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TEST RUN possible only by appointment.

Condition: good (used), Line now available for immediate sale. Was producing thins for supermarket contracts. Hedpswhagmefx Amgen

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications Hodpfx Aoq N U Duemgen - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | Hjdpfxoq Nywxe Amgon | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. Hjdpfjq Nxrxox Amgon 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Hjdpfx Aey Ur Hlsmgjn Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Hodpfx Aszaq Anemgjn Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick

Condition: good (used), Year of construction: 2018, Nailing solution for crates, upper parts or complete 2-/4-way pallets 2 carriages with alternate movement with termplates for 2- and 4-way pallets Nailing of upper and lower parts of the pallet with coil-nailers Integrated saw for exact cutting Machine for stacking pallets both singly and in pairs nested together Laser station for individual signment Hodpfx Aohzxvbemgsn Vacuum for stacking Outfeed band conveyor Pallet dimensions max. 2000 x 3000 mm 2 workers/shift Capacity up to 250-300 pallets per 8-hours-shift (2000x3000 with 9 decking boards and 5 frames) Nailing top and bottom with coil-nailers (big coil magazines) Large pallets with floor frame can be produced in 1 pass through Total space 19 x 12 m

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding punch Positioning table Hjdpouzh Anefx Amgon Portal stacker Pallet size 600x800 - 1200x1400 mm

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW Hjdpfx Amsyyy Egjgen 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2007, EBT film making machine Sysmac SYS-PP65 (Blow film extrusion system). Very good condition, very little used. The machine is currently disassembled. Hedjuibq Sjpfx Amgen

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Excellent opportunity for medium-sized PVC window manufacturers. Year of manufacture: 2020–2022. Main machines: • CNC machining and cutting center for profiles FA 1082 = 121,000 EUR • Welding and corner cleaning center TD 3020 = 62,000 EUR • End milling machine PA 2010 = 4,000 EUR • CNC machine for cutting seals HJ 3010 = 8,000 EUR • Output robot M100 = 16,000 EUR • Seal pressing unit CB200 = included in the price TOTAL VALUE INDIVIDUALLY: 211,000 EUR SPECIAL PACKAGE OFFER 10% DISCOUNT ON THE ENTIRE PACKAGE PRICE OF THE COMPLETE PACKAGE: 190,000 EUR Advantages: • Excellent technical condition • Regular professional maintenance • Immediate availability • Significant savings compared to the price of new machines • Suitable for medium-volume production of PVC windows Hsdpfezanmqex Amgen Additional information: • Option to purchase the entire line • Option to view the line in operation • We prefer to sell the complete line Please contact: Dipl. Ing. Anna Michlová +4-2-0-7-3-4-6-3-3-2-5-6 michlova (at) samat.cz

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer - width of workpiece 35 – 130mm - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm Hedpfx Amozabhbogon DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer.

Year of construction: 2011, condition: good (used), functionality: fully functional, Automatic bread slicing and packaging line. Bread slicer. Fully operational, recently serviced. Little used – mostly as a backup unit. Maximum speed approx. 3,600 pcs/h. Slice thickness 12 mm. Hsdpfxex A E E Ue Amgjn

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm Hjdpfx Amsu Ibuwogjn *

Condition: excellent (used), 622 USED Koenig Lippelt Rustica ciabatta machine. EXTERNAL DIMENSIONS (in cm): - W: 180, - L: 75, - H:153. Hsdpfx Amsnpxl Djgen TECHNICAL DATA: - Weight: 20-700 g, - 4 cutting rollers The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Hjdpfxjy Ah Nfj Amgsn Manufacturer: STOZA s.r.o. Year of manufacture: 2014 Condition: very good Category ID: 659 Type: Pellet production line If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, HSM-3026-TURBO-T-DRIVE-CL-R4-SV Hedjw U Rycjpfx Amgjn Year of manufacture: 2022. The machine is in continuous operation and fully functional. Equipped with ContourLine-Classic and V system welding technologies. Capable of welding frames and sashes. Minimum welding dimension: 450 mm x 450 mm. Maximum welding dimension: 2900 mm x 2900 mm. Welding process is 100% servo-controlled. Programming via touch screen interface. High-temperature welding. Quick-change welding foil system. Quick-change pad system. Ability to perform both angled and parallel joining processes. Individually programmable welding parameters. CE-compliant safety device. Horizontal take-off unit. Cleaning device equipped with a hinge drilling unit.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, HSM - T - DRIVE - CL - R4 - SV - 30/26. Year of manufacture: 2020. Equipped with ContourLine-Classic welding technology as well as V-system. The machine is in continuous operation and fully functional. Capable of welding frames and sashes, as well as frames with threshold. Minimum welding dimension: 490 mm x 497 mm. Maximum welding dimension: 2690 mm x 3100 mm. Welding process is 100% controlled by servomechanism. Programming via touchscreen. High-temperature welding. Quick-change welding foil system. Quick-change pad system. Diagonal or parallel joining process. Individually programmable welding parameters. CE-compliant safety device. Horizontal take-off unit. Hjdpfjw U Nlwox Amgen

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Insulated glass production line Maximum IG unit size (with gas filling and secondary sealing): 2500 x 4300 mm Maximum IG unit size (with gas filling, excluding secondary sealing): 2500 x 5000 mm Minimum IG unit size: 180 x 350 mm Maximum IG unit thickness: 52 mm (up to 56 mm possible) Working direction: from right to left Line consists of: Hedpfx Aey Ud Eyomgen - Glass washing machine VHW-25/V8, year: 2007, - SuperSpacer Applicator VSA-50/25, year: 2007, - Automatic corner sealing machine SSV-25, year: 2007, - Frame mounting station RSVN-35/25U, year: 2007, - Gas filling press FPS-35/25U2, year: 2007 - capable of pressing and filling units up to 5000 mm, - Automatic sealing robot VL-1N/25, year: 2003 for Polysulfide, shaped units and triple-glazed units. Total length of the line is approx. 44,8 m Layout can be found attached as Tech. data file See video Very good and clean condition As is Available immediately

Operating hours: 200 h, condition: ready for operation (used), functionality: fully functional, Complete Equipment Sale for Cheese/Dairy Production 1 - 500 l/h ATA brand pasteurizer, three-phase 1 - Horizontal cheese press, capacity for 48 kg, 4-position 1 - 150 l ricotta vat, three-phase Hsdpfx Aey Rv Edsmgon 2 - 300 l refrigeration cabinets with three levels of separation 1 - 220 l coagulation vat, three-phase 1 - 150 l coagulation vat 2 - Hand wash sinks 2 - Work tables 1 x 1.70 m 1 - Vacuum machine 40 - Stainless steel cheese curing racks 0.64 x 0.52 m 2 - Rack trolleys for racks 1 - Stainless steel table with shelves 0.6 x 1.45 m 1 - Table with sink and sliding doors 0.6 x 1.45 m 3 - 30 liter aluminum cans 2 - 50 liter aluminum cans 1 - Boot washer 1 - 600 liter refrigerated milk tank

Condition: excellent (used), Vemag Sausage Production Line Vemag Vacuum Filler -Type: HP20E -Power: 23 kW -Operating Hours: 4174 -Year of Production: 2020 -With Loading -With Technical Documentation -Condition: Used in very good condition, ready to work Precision Sausage Portioning, Joining, and Separating Device -Type: FSL 210 -Power: 7 kW -Capacity: Up to 800 Portions/Min -Year of Production: 2020 -Weight: 548 kg -Condition: Used in very good condition, ready to work Automatic Portioning Device -Type: MMP220 Hsdjx Rbdfopfx Amgsn -Power: 1.5 kW -Portion Size: 100 - 3000 g -Year of Production: 2020 -Weight: 335 kg -Condition: Used in very good condition, ready to work

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 Hodoyc Rtxepfx Amgsn TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans Hjdpfx Amoyc R U Aogsn - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.