Used Kami/Shem Sbkm 2500/45E for sale (3,158)

Year of construction: 2022, condition: new, Bending length max. 2545 mm Bending capacity max. 4.5 mm Ijdpfxjl D Rnns Abhoba Angular range of the bending beam 0 - 135 degrees Upper beam stroke 25 mm Engine power hydraulic pump 7.5 kW Travel of the bending cylinder 400 mm Travel of the pressure cylinder 75 mm Travel of the back gauge 800 mm Work table height 910 mm Weight 4,200.00 kg Dimensions 3400x2010x1700mm

Condition: new, Year of construction: 2025, functionality: fully functional, Heigth of center: 500 mm Distance between center: 3000 mm Bed width: 755 mm Max. swing over bed: 1000 mm Max. swing over slider: 610 mm Diameter of spindlehole: 130 mm Spindlenose: D1-15/short cone 15 Speed range: 3.15 - 315 RPM (21 steps) Range longitudinal feeds: 0.1 - 12 mm/U 57 steps Range cross feeds: 0.05 - 6 mm/U 57 steps Quick feed in Z- and X-Axis: 3700/1850 mm/min Metric thread: 1 - 120 mm Inch thread: 3/8 - 28 Pitch/Inch Model thread: 0.5 - 60 mm Diametral pitch: 1 - 56 DP Diameter of Tailstock Quill: 160mm Quill konus: MK 6 Isdpfx Abezr E E Tehoba Quill stroke: 300 mm Power of engine: 22 KW Weight: 14400 kg Dimensions LxWxH = 6350 x 2190 x 1810 mm Accerssories - D800 mm independent face plate - 3 axis DRO system - Coolant tank - Steady rest in range of D20 - 480 mm - Following rest in range of D20 - 200 mm - 4-fold tool holder - Chuck cover - Rapid speed on longitudinal and cross slides - Motorized tailstock

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Isdpfx Ae Nh Hxebhsba Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications height of Center 330 mm Length between center 3000 mm Spindle bore 82 mm Swing over bed 660 mm Swing in the gap 840 mm Swing over slider 420 Speed range 9-1600 rpm (24 steps) Spindle nose ISO 702 / II No. 8 Camlock Range of longitudinal feeds 0,028 - 6,43 mm / rev (93 steps) Range of feed rates 0,012 - 2,73 mm / rev (93 steps) Metric threads 0.5 - 224 mm (48 steps) Inch thread 72 - 1/8 speed / inch (49 steps) Module thread 0.5 - 112 mm (42 steps) Isdodzzw Aopfx Abhsba Diametral thread 56 - 1/4 DP Quill diameter 75 mm Quill travel 150 mm Quill holder Morse cone 5 Motor power 7,5 kW Weight 3,300.00 kg Dimensions 4635 x 1050 x 1450 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: fortlaufend, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, feed length Z-axis: 400 mm, controller manufacturer: GSK, controller model: 218MC, total height: 2,450 mm, total length: 1,620 mm, total width: 2,050 mm, table width: 240 mm, table length: 800 mm, table load: 100 kg, overall weight: 2,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 1 bar, distance table to spindle center: 320 mm, spindle motor power: 3,700 W, number of spindles: 1, number of slots in tool magazine: 12, tool length: 250 mm, tool diameter: 104 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Table size: 800x240 mm Spindle speed: 0-6000 rpm Drilling capacity in cast iron: 40 mm Drilling capacity in steel: 32 mm Ibjdjyla Nnspfx Abhsa Longitudinal travel (X): 500 mm Cross travel (Y): 300 mm Vertical travel (Z): 400 mm Max. distance spindle nose - table: 450 mm Tool holder: BT 30 Quill diameter: 120 mm Rapid traverse X+Y axes: 20 m/min Rapid traverse Z axis: 15 m/min Number/size/spacing of T-slots: 3x14x80 mm Arm reach: 320 mm Tool stations: 12 Max. tool diameter: 104/205 mm Max. tool length: 250 mm Max. tool weight: 8 kg Motor power: 3.7 kW, 400 Volt Max. table load: 100 kg Weight: 500.00 kg Dimensions: 1620x20500x2450 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Ijdpfjd I A Aujx Abhsba Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Ibodped I A Dhjfx Abhoa Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm Iedpfxjd I A Ahe Abhoba

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quill Travel 150 mm Quill sleeve Morse cone 5 Ibodod I Az Sopfx Abhoa Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Distance between Cneter 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm Ijdpfxsd I A Dae Abhsba

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 610 mm, spindle bore: 130 mm, turning diameter: 1,000 mm, center height: 500 mm, turning length: 3,000 mm, quill diameter: 160 mm, quill travel distance: 300 mm, total length: 6,350 mm, total width: 2,190 mm, total height: 1,810 mm, spindle speed (max.): 315 rpm, spindle speed (min.): 3 rpm, swing diameter over cross slide: 610 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, metric thread steps: 44, bed width: 755 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, Maximum turning diameter: 500 mm Ibedsy S Rqdopfx Abhea Distance between centers: 3000 mm Bed width: 755 mm Diameter of swing over bed: 1000 mm Diameter of swing over carriage: 610 mm Spindle bore: 130 mm Spindle nose: D1-15/Short taper 15 Spindle speed range: 3.15 - 315 rpm (21 steps) Longitudinal feed range: 0.1 - 12 mm/rev, 57 steps Cross feed range: 0.05 - 6 mm/rev, 57 steps Rapid traverse rate longitudinal/cross: 3700/1850 mm/min Metric threads: 1 - 120 mm, 44 steps Inch threads: 3/8 - 28 TPI, 31 steps Module threads: 0.5 - 60 mm, 45 steps Diametral threads: 1 - 56 DP, 38 steps Tailstock quill diameter: 160 mm Quill mounting: MK 6 Quill travel: 300 mm Motor power: 22 kW Weight: 14,400.00 kg Dimensions: 6350 x 2190 x 1810 mm

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop Ibodpfey Raitex Abhoa - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) Ibsdpfx Abjx Svm Rohja 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm T size: 22mm Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg Ibsdpfx Aowu D Afsbhsa

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Iodpfx Abjyznhlohoba Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm Iodperfd Thefx Abhsba thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm Iodpfem Rlb Nox Abheba turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, bore capacity in steel (diameter) 25 mm throat 185 mm bore stroke 50 mm spindle taper MK 3 spindle turning speed range 50 - 2500 U/min 178 mm 480 mm table surface area 700 x 180 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 160 t dimensions of the machine ca. 0,75 x 0,8 x 0,9 m Iodpfx Abjd Sb Ayohsba domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection Iodpfof Nb Hksx Abheba

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. Iodpfx Aofv H Huebheba

Condition: new, bore capacity in steel (diameter) 50 mm throat 360 mm bore stroke 150 mm spindle turning speed range 120 - 3000 U/min spindle taper SK 40 650 mm 320 mm vertical adjustment 500 mm table surface area 1000 x 300 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 2,2 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high Ibjdpfofg U S Uex Abhea • tapping attachment • Gear head swiveling • Coolant system

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° Ibjdpfjfv H Hqjx Abhja • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 115 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 350 mm 130 mm table surface area 590 x 190 mm connected load frequency 400 V diameter of hob max. 80 mm feed 0,1 - 0,18 - 0,26 mm/U total power requirement 1,1 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° Iodpfxjf Nb E Hj Abhjba - Feed via hand crank

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm Ibedpfx Abef Nb Hgjhsa turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 160 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 85 - 1800 U/min Ibodpsfv H H Hjfx Abhja feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 0,85 / 1,5 kW weight of the machine ca. 500 kg. range L-W-H 965 x 515 x 1920 mm