Used Karnasch S/400 for sale (77,754)

Condition: used, Year of construction: 1984, ja Lsdpfxox U A Sfo Ammeac positioning automatic ja documentation ja ja

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Lodpfx Aek Eakvsmmjac -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Ledjlatz Djpfx Ammjac - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Ljdpfxezgb Efo Ammeac Price: on request contact: Mr. Ralf Schulz

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) Ledsi Ri Daspfx Ammjac 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract Lodot Hw S Uepfx Ammsac

Condition: used, mileage: 228,400 km, power: 130 kW (176.75 HP), first registration: 11/2006, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: orange, gearing type: semi-automatic, emission class: euro4, Equipment: air conditioning, all wheel drive, * Mercedes Unimog U400 4x4 * 3-way tipper * All-wheel drive * Dual-range gearbox * Dual PTO (high and low) * Rear hydraulic system * Snow plow preparation * Front PTO * Semi-automatic transmission * VIN: WDB4051031V211726 * Engine type: 900916 Lajdpfxoqcriuj Ammsc * kW: 130 * Euro 4 * Displacement: 4249 cc * Unladen weight: 6540 kg * Gross weight: 12500 kg * Fifth wheel load: 1000 kg * Towing capacity: 18700 kg * Wheelbase: 3080 mm * Tipper length: 2.40 m * Tipper width: 2.15 m * Vehicle length: 5150 mm * Vehicle width: 2330 mm * Vehicle height: 3070 mm * Tires: 385 / 65 R 22.5 * Net price * All information without guarantee Tel./WhatsApp:

Condition: good (used), Year of construction: 2017, CALIBRATION – PLANER MACHINE, MANUFACTURER – LEDINEK COMPANY, Ljdszd E R Hepfx Ammeac Model ROTOLES 400 D – S, Year of Manufacture – 2017. Condition of the machine – good.

Condition: excellent (used), functionality: fully functional, mileage: 669 km, power: 294 kW (399.73 HP), first registration: 06/2023, fuel type: gas, empty load weight: 9,350 kg, maximum load weight: 9,294 kg, overall weight: 18,644 kg, axle configuration: 4x2, wheelbase: 38,000 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 4,550 mm, loading space width: 2,400 mm, Year of construction: 2023, Equipment: differential lock, full service history, hill-start assist, lane keeping assist, retarder, seat heater, trailer coupling, Iveco S-Way 400/Meiler/CNG/Natural Gas/Leaf Spring Suspension/Trailer Coupling • Manufacturer: IVECO • Type: S-Way 400 • NEW PRICE from €210,000 • Mileage: 669 km • First registration: 06.2023 • Power: 294 kW / 399 hp • Transmission: Automatic • Body: Meiler three-sided tipper • Loading area: L: 4.55 meters x W: 2.40 meters • CNG/Natural Gas • Wheelbase: 3.80 meters • Retarder • Air conditioning • Cruise control • Hill start assist • Lane keeping assist • Starting assist • Differential lock • Hands-free system • Tachograph • Roof hatch • Heated seats • Trailer coupling – Duo-matic and standard connections • Trailer hydraulics • Automatic lights Ledozavzcjpfx Ammjac • Heated side mirrors • Xenon lights • Euro: 6 • Unladen weight: 9350 kg • Payload: 9294 kg • Permissible total weight: 18644 kg • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Year of construction: 2024, condition: new, AD-S 40400 PLATE BENDING MACHINE Bending force / Bending capacity tons: 400 Bending length / Bending length mm: 4050 Distance between columns / Distance between columns mm: 3400 Y rapid traverse speed / Rapid traverse speed mm/sec: 100 Y working speed / Working speed mm/sec: 8 Y return speed / Return speed mm/sec: 80 Crowning / Crowning: Motorized Daylight / Tool clearance and penetration depth of the bending machine mm: 630 Table width / Table width mm: 300 Ljdpfxsd Rlk Ho Ammsac Table height / Table height mm: 1040 Stroke / Stroke mm: 365 Throat depth / Throat depth mm: 510 Support arms / Support arms: 2 Back gauge finger blocks / The back gauge is standardly equipped with two finger blocks: 2 Speed of travel in X-axis / Press force and speed of the bending machine. X-axis mm/sec: 350 Travel in X-axis / X-axis travel direction mm: 750 Speed of R-axis (max.) / Speed of R-axis (max.) mm/sec: 300 Travel in R-axis / R-axis travel direction mm: 250 Motor power / Motor power kW: 37 Oiltank capacity / Oil tank capacity liters: 450 Length / Length mm: 5750 Width / Width mm: 2110 Height / Height mm: 3540 Weight approx. / Weight approx. kg: 27760 X=650mm X, R, Z1, Z2, /AL CE with manual F. Akas ll M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central clamping: Motorized Price excludes transport and commissioning. We look forward to hearing from you.

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Lajdpfxevgcpvo Ammoc Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) Ledpfx Amoy Nkwljmsac • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, overall weight: 1,800 kg, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Laodpfjy H Uptex Ammoc Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Weight: approx. 1800 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € 1250 kg 1300 mm Ljdpfxewirp As Ammoac 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Lasdpfx Ajwirp Nsmmjc ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,652 h, total height: 2,380 mm, total width: 1,200 mm, overall weight: 13,000 kg, product length (max.): 6,800 mm, Complete cut-off grinding system manufactured in 2014. This HARALD BAUGMARTEN TM 400 S features a press force of 3500 kN and a cutting speed of approximately 30 mm/s at 500 kN. It includes a robust hydraulic system with a total drive power of 30 kW and a machine weight of around 13,000 kg. If you are looking to get high-quality cutting capabilities, consider the HARALD BAUGMARTEN TM 400 S complete cut-off grinding system we have for sale. Contact us for further details. • Press (holding) • Force: 3500 kN • Stroke: 50 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 3500 kN: approx. 4 mm/s • Return speed: 60 mm/s • Press (cutting) • Force: 2500 kN • Stroke: 100 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 2500 kN: approx. 5 mm/s • Shock damping stroke: 20 mm • Drive and power • Hydraulic pump power: 2 × 15 kW • Total hydraulic drive power: 30 kW • Cooling unit power: 3 kW • Hydraulic unit power: 3 kW • Pipe connections (machine to hydraulic unit) • 2 × Ø38 × 4 mm • 2 × Ø30 × 4 mm • 1 × Ø20 × 3 mm • Mechanical adjustment tolerance: ±5 mm • Operating hours • Hydraulic unit 1: 20,652.8 h • Hydraulic unit 2: 20,641.8 h • Main system components (core machine) • Cut-off grinding machine type TM 400 S (manufacturer: Sema Systemtechnik) • Four-column press (manufacturer: Winter Pressen) • Hydraulic power unit with hydraulic pumps • Control cabinet and operator panel Lodpfx Ajyzp Iaommoac Additional equipment • Automatic bar feeder with bundle loader • Bar breaking device • Bar rotary drive / measuring station • Weighing station with section sorting • Extraction and filter system • Soundproof booth (HüWa Schallschutz und Anlagenbau) and protective fencing

Condition: good (used), Year of construction: 2008, machine/vehicle number: 87920908, Offer 24228 Technical data: Ledpfsv Hzq Ssx Ammeac - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t coil internal dia. 480 - 520 mm Lsdpfx Amjvuungomsac coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 400 mm Travel distance Y :450 mm Travel distance Z: 350 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 HSCI spindle chuck: HSK-40 spindle revolutions: 42000 rpm Speed range to: 42000 U/min table size X: 400 mm table size Y: 400 mm max. workpiece weight: 100 kg tool changer: 68 - time input Power : 20 kW Torque: 30 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center designed for graphite machining Heidenhain iTNC 530 HSCI control 68-position tool changer HSK-40 high-speed spindle Lasdjym Rr Aepfx Ammjc spindle speed up to 42,000 rpm KNOLL oil filtration system KF 400 / FKA 620 KNOLL chip conveyor ideal for electrode production high surface quality in finishing

Condition: new, incl. ramp recess with ramps / closed loading platform with numerous lashing points / manual cable winch Technical Data: • Brand: Martz • Model: GT PLATEAU 400 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Unregistered • TÜV/HU (inspection): 2 years from first registration • Interior dimensions (LxWxH): 405 x 199 x 0 cm • Exterior dimensions (LxWxH): 555 x 203 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 565 kg • Payload: 2,135 kg • Chassis: Flatbed trailer (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber suspension axles • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Anti-slip, waterproof phenolic plywood floor • incl. manual cable winch with brake • Ramp storage compartment under the loading platform • 2x steel loading ramps • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • 8x lashing rings recessed in the side frame (600daN/kg) • Side panels can be retrofitted at any time • Automatic reverse mechanism • KNOTT overrun brake and parking brake • Reinforced, very sturdy bolted V-drawbar • 13-pin connector Lsdpfx Amex S Rm Eomoac • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Tail lights recessed in the rear frame • Automatic jockey wheel mounted Retrofittable accessories – feel free to enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Toolbox • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance, or export license plates (Germany) can be provided - Export plates incl. customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available on site! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions, and prior sale -

Condition: new, incl. tiltable – perforated tracks + phenolic plywood & checker plate in the centre / hand winch Technical Specifications: • Brand: Martz • Model: GT KIPPBAR 400 • Vehicle type: Car transporter • Vehicle condition: New • First registration: Unregistered • MOT/General inspection: 2 years from first registration • Internal dimensions (LxWxH): 405 x 210 x 0 cm • External dimensions (LxWxH): 556 x 215 x 77 cm • Perm. gross weight: 2,700 kg • Unladen weight: 667 kg • Payload: 2,033 kg Lsdpjx Tbi Tsfx Ammsac • Chassis: Platform trailer (wheels underneath) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Perforated steel tracks, ideal for secure lashing • Between tracks: phenolic plywood deck with central aluminium checker plate, anti-slip and water-resistant • incl. steel loading ramps • tiltable loading platform • very low chassis for minimal loading angle • tiltable loading platform (8° approach angle) • very lightweight trailer with robust construction • additional 8 lashing rings in the side floor • braked KNOTT rubber torsion axles • automatic reverse feature • KNOTT overrun device and parking brake • very robust, bolted and reinforced V-drawbar • 13-pin plug • reversing light • high-quality safety lighting • integrated rear fog light • recessed lighting in rear frame • rear positioning lights mounted • jockey wheel mounted Optional accessories – feel free to inquire: • 100 km/h approval with shock absorbers • anti-theft device • spare wheel • storage box • reversing light • lashing straps • and more. New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration papers can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialised dealers & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions, and prior sale -

Condition: new, functionality: fully functional, grinding wheel diameter: 400 mm, Equipment: documentation/manual, Impeller mounted on ball bearings ensures quiet, smooth operation and long service life. Powerful drive motor with high torque. Adjustable guards made of durable plastic provide effective spark protection. Standard equipment includes 35 mm suction nozzles, with provision for dust extraction connection. Robust, modern design and a very wide range of additional accessories. Adjustable workpiece support rests. Lajdpfxsyt Hvwj Ammjc Modern LED lighting. Large spark protection covers. Bases shown in the photos are optional equipment available at extra cost. Technical Specifications Disc/wheel diameter: 400 mm Disc/wheel thickness: 50 mm Disc/wheel bore: 127 mm Disc/wheel grit: G 36 / G 80 Maximum rotational speed: 1450 rpm Motor power: 7.5 kW Motor power S1 100%: 5.5 kW Voltage: 400 V Dimensions - width: 745 mm Dimensions - depth: 540 mm Dimensions - height: 510 mm Weight approx.: 114 kg

Condition: good (used), Year of construction: 2013, mast type: telescopic, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 6.200 kg Functional Lifting capacity: 230 kg Working height: 1.420 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1220 m Transport dimensions (LxWxH): 7,85x2,32x2,38 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 400S Year of build: 2013 Condition: Used Data: Max. working height: 14,20 m Platform height: 12,20 m Max. reach: 11,00 m Platform lifting capacity: 230kg Platform dimensions LxW: 1,83 x 0,91 m Swivel range: endless Laedpfxswc Sp Aj Ammjc Max. climbing capacity: 45% Total dimensions LxWxH: 7,85x 2,32 x 2,38 m Movable up to working height: 14,20 m Wheel pressure max.: 33kN Ground clearance: 0,25 m Drive type: Diesel Own weight: 6.200 kg Special features: Rotating work basket, four-wheel pendulum axle

Condition: used, Year of construction: 2006, mast type: telescopic, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 6.083 kg Lodpjwc Sppjfx Ammsac Functional Lifting capacity: 230 kg Working height: 1.420 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1220 m Transport dimensions (LxWxH): 7,85x2,32x2,38 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 400S Year of build: 2006 Condition: Used Data: Max. working height: 14,20 m Platform height: 12,20 m Max. reach: 11,00 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,83 x 0,91 m Swivel range: endless Max. climbing capacity: 45 % Total dimensions LxWxH: 7,85 x 2,32 x 2,38 m Movable up to working height: 14,20 m Wheel pressure max.: 33 kN Ground clearance: 0,25 m Drive type: Diesel Own weight: 6.083 kg Special features: Rotating work basket, all-wheel drive, pendulum axle, permanently installed generator with 230 V socket in the basket.

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Lasdpfx Asyab I Uommec