Used Keckex Komex M13 500 for sale (15,521)

Condition: used, Year of construction: 2022, KOMEX M13 500 Thermal Weed Removal Device Demonstration unit with 100 operating hours Compact and flexible KOMEX M13 500 – the compact and flexible thermal weed removal device. With forklift-compatible entry slots and its slim design, the unit offers countless applications for weed control, gum removal, and gentle cleaning. The mobile and easy-to-transport build is perfectly suited for any pick-up cargo bed or flatbed vehicle. Suitable for all carrier vehicles with cargo surfaces: • Pick-up trucks • Electric vehicles • Municipal vehicles • Tractors, forklifts, and more Standard equipment: - Hot water steam generator, 12 Volt, 13 l/min, digital - Forklift frame 1.30 x 0.96 m for KOMEX-M13-500 - Water tank 250 L, upright, Traffic Grey RAL 7042, front - Water tank 250 L, upright, Traffic Grey RAL 7042, rear - Battery compartment with cover for KSRA - Automatic hose reel, stainless steel for 15 m - 15 m hot water hose with protective cover and abrasion guard Lrjdpfx Amjyhtp Hs Uep - Kit: battery compartment, 260Ah battery, charger, 80A securing plate - 2-piece hand lance set, KHL-P (gun) with KHL-D (nozzles), KHL-Z cylinder lance and quick coupling - Dimensions (L x W x H): 131 x 96 x 122 cm - Unladen weight approx. 420 kg Optional equipment: - Mounting bracket incl. pin and chain, coated in RAL 6018 GREEN - Walk-behind area device - 4-position lance holder, straight, 2.0 - Brass brush lance D8 cm, brass brush lance D8 cm with handle Location: Anton Hülsken

Condition: used, empty load weight: 450 kg, Year of construction: 2022, operating hours: 204 h, Operating hours: 204 _____ KOMEX JESPI M13 Thermal Weed Control Unit. The KOMEX JESPI M13 is a self-propelled and versatile thermal weed control unit. It is a compact and easy-to-handle solution for weed removal, gum removal, and gentle cleaning in smaller or hard-to-reach work environments. Ideal for narrow paths, tight alleys, and slopes up to 25%, as well as trailers with ramps. Advantages: - Environmentally friendly - Suitable for all surfaces - Easy to operate - Versatile accessories - Targeted treatments - Very quiet operation - Low water consumption - Low fuel consumption - Low service and maintenance costs - Can be used in all weather conditions - Modular design. Equipment: - Hot water steam generator, 12 volts, 13 l/min, digital - JESPI L drive unit including battery and charger - Forklift frame 2.0 x 0.7 m - Water tank 450 L, horizontal, traffic gray RAL 7042 - KOMEX-JESPI set: AGM battery 12V, 260Ah with 25A charger, 2 units - SB 50 gray plug - Automatic hose reel, stainless steel for 15 m - 15 m HW hose with protective cover and abrasion protection - Mounting bracket for area applicator KFBH-50 including bolt and chain - Hand-guided area applicator, 50 cm - Lance holder, 4-way, straight, 2.0 - Hand lance set, 2-part, pistol with nozzle, cylinder lance and quick coupling - (4x) fastening points - L x W x H: 240 x 80 x 130 cm - Dry weight: approx. 475 kg, Storage location: Hall Gondelsheim. Lredpfx Aslb Rxtom Usp

Condition: new, Year of construction: 2022, _____Standard equipment: - Hot water steam generator, 12 Volt, 13 l/min, digital - Frame 1.90 m x 1.26 m - Water tank 800 l, horizontal, black RAL 9017 - Battery compartment with cover - Set: AGM battery 12V, 260Ah with 25A charger, 2 pcs. - SB 50 gray plug, 2 pcs. - Automatic hose reel, stainless steel for 15 m - 15 m hot water hose with protective cover and abrasion protection - Lance holder, 4-way, angled - Hand lance set, 2-piece, pistol with nozzles - Cylinder lance and quick coupling - Support leg with swivel castors - Support leg with steering castors - Remote control preparation incl. separation point - L x W x H: 190 x 128 x 100 cm - Unladen weight: approx. 460 kg Optional equipment: - Digital remote control for hot water steam generator / forward / backward / up / down with 5 m cable Ljdpoh U I Rvefx Am Usrp - Hydraulic high-pressure pump, water flow rate 15 l/min at 250 bar without hoses - Hydraulic hose set for high-pressure pump - High-pressure lance with 15° nozzle -05 - Hydraulic dispensing arm pump 169 l/min without hoses - Hydraulic hose set for dispensing pump including complete mounting kit - Hand lance with dispensing head with Geka connection and shut-off valve D 15 cm - Tie-down point for tensioning strap to be inserted into a frame tube - Location: 54595 Prüm

Condition: used, Year of construction: 2023, color: other, KECKEX JESPI / WEEDEX-M13 Demonstration unit Vehicle structure: Set consisting of: - WEEDEX-M13 (hot water steam generator, 12 volts, 13 l/min, digital) - JESPI (JESPI L drive unit including battery and charger) - Forklift frame 2.0 x 0.7 m - Water tank 450 L, horizontal, traffic gray RAL 7042 (KOMEX-JESPI) - Set: AGM battery 12V, 260Ah with 25A charger, 2 pieces - Connector SB 50 gray - Automatic hose reel, stainless steel for 15 m - 15 m hot water hose with protective cover and abrasion protection - Mounting bracket for surface treatment device KFBH-50 incl. bolt and chain - Hand-guided surface treatment device, 50 cm - Lance holder 4-way, straight, 2.0 - Hand lance set 2-piece, KHL-P (gun) with KHL-D (nozzle), KHL-Z - Cylinder lance and quick coupling L x W x H: 240 x 80 x 130 cm Dry weight: approx. 475 kg Maintenance and spare parts case WEEDEX-M13 Lrjdpfezhlumox Am Ujp Lance, spike L30 cm Lance, brass nozzle D8 cm Lance, fiber brush D8 cm

Condition: new, Year of construction: 2022, Keckex KOMEX M13 FLEX Thermal Weed Removal Device Rental return at a special price Flexible and mobile The KOMEX M13 FLEX is the smallest yet most versatile thermal weed removal device. With various options, you can configure your custom unit for weed removal, gum removal, and gentle cleaning applications. Modular, self-contained, and highly effective in all use cases. Optional sub-frames: trolley, 3-point hitch, and more. Ideal for cleaning and wild weed control. Water tank: without / with self-priming pump. Compatible with all carrier vehicles with water tank, trailers with water tank, vehicles with 3-point hitch and water tank. Standard equipment: - Hot water steam generator 12 Volt, 9 l/min, LP1002, analog - Multi-frame 0.9m galvanized - Battery compartment with cover - Set: AGM battery 12V, 240Ah with charger 25A, 2x SB 50 grey connectors - 15 m hot water hose with protective sleeve and abrasion guard - 2-piece spray lance set, gun with nozzles, cylinder lance, and quick coupling - L x W x H: 90 x 70 x 100 cm - Unladen weight approx. 240 kg Special equipment: - Automatic hose reel, stainless steel for 15 m - Holder for machine protection - Machine protection - 3kg descaler - 4-position lance holder, straight, 2.0 - 3-point hitch Cat. 1-2 for multi-frame Location: n/a Lrodpfx Ameyhtp Tj Uop

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Frequency: 50 Hz Lrodpev I Alyefx Am Usp Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Ledpfey Iaa Tjx Am Uerp The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load Ljdpfjzmq Hxox Am Uorp - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm Lrjdpema Dkfofx Am Usp min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Ljdpfx Amozmu Itj Uorp Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: good (used), Renz ABL-500 Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 500 x 700mm Min. feeder size: 70 x 135mm Max. thickness: 15mm Table with folded sheet feeder Automatic hanger loading and mounting Automatic wire pick-up from the roll with wire spacer removal Closing module Delivery Central controller for the entire machine Capacity up to 2500 cycles/h 380V power supply + compressed air The machine has a central lubrication system. Lrsdpjzmu Imjfx Am Usp Weighs 1300kg Includes many additional components, tools, and documentation.

Condition: not inspected (used), Indramat TDM13/1X050-008 944203 Lrodpfx Ajzkdygom Ujp TD M3..-030-300-W1 MOTOR: MACO90B-.-PD I (CONT)= 25A I (PEAK)= 30A n(OPERATE)=2700 rpm MA: 250mV/A INPUT E1/2

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Lodpfx Aovzkylom Ujrp Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: used, Elektrische Exzenterpresse / Electric Eccentric Press Komex Eccentric Die Cutting Machine Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Lsdjyt H Ndjpfx Am Ujrp On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg Ljdoza Eipopfx Am Uorp ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. Lrjdsx U Df Hspfx Am Uep For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck.

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Lrsdpezlactefx Am Uop Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (2.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a cutout for the hanger 380V power supply Weight: 195 kg

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Ljdpfx Aozkycwem Uorp Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg

Condition: good (used), Grinding wheel Lrodpfx Aocx N Atjm Ujp Diameter 500 mm 475 rpm.

Year of construction: 2010, condition: excellent (used), Splash guard 24830 Lsdped Tyu Ejfx Am Uerp Diameter 500 mm Height 115 mm Taper 120 mm Estimated age

Condition: excellent (used), Splash plate Diameter: 500 mm Weight: 68 kg Bolt circle diameter: 134 mm Lsdpfxefm Tqro Am Uerp Center bore diameter: 96 mm

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Lrodpfxsziww Ns Am Ujp Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Technical specifications: Manufacturer: Karl Tränklein GmbH Lrjdpfxoziwr He Am Usp Model: ZW 500 Year of manufacture: 1990 Serial number: 8083 Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.

Condition: excellent (used), For sale is an ABUS wall-mounted jib crane equipped with an HADEF electric chain hoist, Type 63/78EF. This set is designed for lifting and moving loads in workshops, warehouses, production halls, and assembly stations. The robust steel construction from ABUS ensures high strength and stability during operation. The crane is equipped with an HADEF electric chain hoist controlled by a pendant control. The design is suitable for mounting on a wall or steel column. Lrsdpsziqnhefx Am Uop Technical data: Crane manufacturer: ABUS Kransysteme GmbH Hoist manufacturer: HADEF Hoist type: 63/78EF Crane lifting capacity: 500 kg Hoist lifting capacity: 250 kg Total jib length: 204 cm Hoist year of manufacture: 1987 Crane year of manufacture: 2002 Power supply: 220/380 V Frequency: 50 Hz Motor power: 0.3 kW Lifting speed: 5.0 m/min Protection class: IP44 Chain: 5 × 15 mm (DIN 5684-8) Pendant control CE marking Condition: Used. Functional. Shows normal signs of use in the form of scratches, paint chips, and dirt, as visible in the photos. Visual condition consistent with age and use.

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Ljdpfx Ajzhkkajm Uorp Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.