Used Kieserling K54 for sale (43)

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08I/8625, Offer Number: M08I/8625 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: KIESERLING Type: K54 Constr. year: 1981/2011 diameter range: 8-22 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 175 mm shaft length under head: 155 mm output - pieces/min: 105 press power: 250 to Location: Germany Tedpfx Ahsygv Ayemoc

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Todpoz Alg Sefx Ahmsc Good condition

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm Tsdpfsymacwjx Ahmoc - Pointed diameter : 10 - 50 mm - Force : 25 tons - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Tools: Rotating hammers

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 AS NEW, will be supplied revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic Tedpfjymb Uusx Ahmsc - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable

Condition: used, Year of construction: 1990, From the Gütersloh site we offer a well-maintained eccentric press Pressure 100 t Displacement 330 mm Hub 10-130 mm Speed 56 RPM Eccentric adjustment 80 mm Table surface 830x600 mm Piston face 250x130 mm Table height 870 mm Tjdpfx Ahoyglzfemsc Taper hole in the piston 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Example: - 300 N/mm2 = Max. 6.5mm Tsdpevtpghefx Ahmoc - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Scope of supply includes : - Bar Loading channel - Input pinch-roll - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation Todpjymcmrjfx Ahmec - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min

Condition: used, Straightener & polishing machine WRPT2, manufactured by KIESERLING Bars diameter : 10 - 35 mm Bars length : 3 - 6 m Scope of delivery includes : 1. Infeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 2. WRPT2 straightening machines, made KIESERLING with Todpfxsymcm Ee Ahmoc - 2-roller straightener with upper roller height adjustment and upper/lower angle adjustment - Two geared motors with cardan shaft drive - Infeed guide - Side guide support - 1 set of side guides 3. Outfeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 4 Electric control panel with manual movement buttons Bars diameter: 10 - 35 mm Bars length: 3 - 6 m

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Tedpfoyiflmex Ahmsc

Year of construction: 1986, condition: used, pressure 100 t throat 330 mm stroke 10-130 mm no. of strokes 56 Hub/min ram - range of adjustment 80 mm Todpfslp U Stsx Ahmoc table surface area 830x600 mm ram surface 250x130 mm table height 870 mm tool hole in ram 50 mm weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2100x1900x3000 mm

Year of construction: 1986, condition: like new (used), More information on request Todpfxjhmfnho Ahmec

Condition: used, Year of construction: 2026, functionality: fully functional, empty load weight: 240 kg, load capacity: 2,500 kg, Rotary device ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Tedpfx Aozwyf Eehmec Technical condition: very good Description: Good working condition, ready for use, as returned by the previous owner.

Condition: used, Pressure: 160T Tedpj Dviwofx Ahmec Length of stroke: 30 - 180 mm Down table size: 800x900 mm Back pressure: WITH BACK PRESSURE Technical characteristics: WITH AIR CLUTCH New electric system

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 36316, Carousel packaging and filling machine with three filling nozzles, designed for automated filling and sealing of cups. The machine ensures a complete process: - automatic cup feeding - filling using 3 filling nozzles - placing and heat-sealing of the lid film - automatic lid placement - discharge of the finished, sealed product The machine is equipped with a product transfer device with a CLAMP/DN32 connection. Suitable for food production and other operations using cup filling. Todpfxszua Nrs Ahmoc

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS100 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 100 Mp Number of strokes: 560/min Diameter for round point: 20 - 170 mm Tedpfxsymac Rs Ahmsc Diameter for folded point: 35 - 200 mm Diameter of reduced section for both point types: Max. 110 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Tedpsymadnefx Ahmjc The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS63 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 63 Mp Number of strokes: 630/min Diameter for round point: 15 - 115 mm Diameter for folded point: 28 - 150 mm Diameter of reduced section for both point types: Max. 75 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. Tedjymaduspfx Ahmsc New pointing machine: AVS25 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Todpfjymadhjx Ahmoc We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS40 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 40 Mp Number of strokes: 710/min Diameter for round point: 12-90 mm Diameter for folded point: 20-120 mm Diameter of reduced section for both point types: Max. 60 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Pressing force: 100 t - Stroke: 320 mm - Distance between uprights below the guide: 400 mm - Table size: approx. 850 x 610 mm - Through-hole in the table, offset: 335 / 300 mm Tjdpfx Aho E A Tmsmjc - Thickness of the table clamping plate: 90 mm - Overall installation height: approx. 300 mm - Ram surface area: 600 x 335 mm - Height adjustment of the ram: 80 mm - Stroke adjustment: 10 - 130 mm - Ejector stroke in the ram: 32 mm - Stroke rate, continuous operation: approx. 56 /min - Drive: 380 V / 11 kW - Space requirement: approx. W 1900 x H 2800 x D 2200 mm - Weight: approx. 9000 kg - Includes: - UVV press safety control unit PREVENTA - Hydraulically and pneumatically actuated clutch - LUTEX additional braking system - Central lubrication system

Condition: good (used), mileage: 815,045 km, power: 279 kW (379.33 HP), first registration: 04/2006, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 6,980 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel-air, total length: 10,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2006, Volvo FM380 6x2 – 2/3 Berdex Livestock Stock – 54m³ – Weighbridge – I-Shift Transmission Date of Manufacture: 25-04-2006 Mileage: 815,045 km VIN: YV2JN50CX6A611773 Registration: BR-XX-33 APK/TÜV valid until: 13-05-2026 3-deck Berdex livestock box Tail lift with weighing system I-Shift automatic transmission Original Dutch truck = Further Information = Technical Information Tjdpfx Ahoy D Adgjmoc Number of cylinders: 6 Engine displacement: 12,130 cc Transmission Gearbox: I-Shift, 12-speed, automatic Axle Configuration Front axle: Tyres: 385/65R22.5; Max. axle load: 8,000 kg; Left tire tread: 70%; Right tire tread: 70%; Suspension: leaf springs Rear axle 1: Tyres: 295/80R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Suspension: air suspension Rear axle 2: Tyres: 385/65R22.5; Lifting axle; Max. axle load: 7,500 kg; Left tread: 60%; Right tread: 60%; Suspension: air suspension Weights Unladen weight: 14,576 kg Payload: 12,424 kg Gross vehicle weight: 27,000 kg Bodywork Body make: Volvo Condition Technical condition: good Visual condition: good Identification Registration no.: BR-XX-33 Further Information Please contact VAEX The Truck Traders for more information.

Condition: excellent (used), Year of construction: 2020, Panel saw K 540 S incl. clean air extraction unit RL 140 Max. saw blade diameter: 400 mm Cutting width: 800 mm with full table length Max. cutting height: 140 mm Tedjyyaifopfx Ahmec Cutting length: 3200 mm Angle adjustment: manual

Condition: like new (used), For sale is a used Felder K-540S panel saw with a cutting length of 3200 mm. The machine was only used for a short period and has been inspected and refurbished by our service team. Technical specifications: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 140 mm - Max. saw blade diameter 400 mm - Height-adjustable + tilting - Incl. protractor scale - Motor power 5.5 kW / 7.5 hp - Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Tsdpjzil Ebsfx Ahmjc Related terms: Panel, circular saw, panel saw, Felder Reference: R-L0B9N

Year of construction: 1994, condition: used, Bottling line - Mustard and horseradish packaging Tjdpfxszzax Ho Ahmoc The line consists of: 1. Piston filler - KUPER 2. Machine for closing jars 3. Bottle filler - NOVOPACK 4. Machine for separating jars 5. Transporters

Condition: used, in perfect condition, with a brand new housing (replaced just last year). Tedpsziz Swofx Ahmsc

Condition: good (used), Bosch Aventics R412 000 393 Rotary module series RCM-SH R412000393 Item condition: Used, in perfect condition Tedpfslkbp Tox Ahmsc SHELF-K54-4-PD (BOR) More rotary modules - new and used - you can find in our store! International shipping costs on request!