Used Knf N816.1.2Kn.18 for sale (10,749)

Condition: new, Year of construction: 2016, KNF vacuum pump N816.1.2KN.18 230V 50Hz 100W Pmax +50kPa 0.5bar unused from clearance stock Tedpfx Anjwh Nr Ejtsb

Condition: good (used), functionality: fully functional, KNF Neuberger GmbH Mini diaphragm vacuum pump, N86 KN 18 Model: N86KN18 Contidtion: Used Technical Data: Laboport 230V AC 50Hz 0.65A 60W 2.4barü General: Flow rate (flow rate at atmospheric pressure): 6l/min Ultimate vacuum: 100mbar abs. Operating overpressure: 2.4bar Tedperigdqefx Antjb Hose connection ID: 4mm Permissible gas and ambient temperature: +5 to +40 °C Mains: 230V AC / 50Hz Protection class of the motor: IP20 Motor power P1: 60 W Current consumption: 0.65 A Dimensions LxHxW: 164x141x90mm

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing Todpfx Asztc Tdjntob 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine Tjdpezb Imaofx Anteb CE Certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC Control Panel Reference F24 €9,500 (including transport)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Tedpfx Anjzdkhqotjb Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC Tedpfx Aezw Et Isntob year of construction 1998 . Model : CB 18 . Series : B20 .

Condition: used, maximum load weight: 13,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2015, next inspection (TÜV): 09/2026, Year of construction: 2015, Equipment: ABS, In good condition! Technical inspection (TÜV) can be renewed upon request for an additional charge. Todpjzxvkaofx Antsb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Waste disposal system with a central Vecoplan rotary shredder The core of this waste disposal system is a high-performance Vecoplan rotary shredder, type 55/18/3. The system handles the fully automated shredding and processing of edgings, slabs, residual wood, and bark from sawmill production. All material flows are automatically detected, processed, and fed to the respective discharge systems – for efficient and continuous production. Highlights Todpfx Anjzwb Unjtsb High-performance Vecoplan rotary shredder 55/18/3 Continuous shredding of residual wood, slabs, and edgings Robust industrial design for multi-shift operation Integrated metal detection system to protect the machine Vibrating screen with separation into four material fractions Automatic conveyance of wood chips, sawdust, and bark Scraper chain conveyors and vibrating chutes for continuous material flow Complete electrical control system including system cabling Key technical data Drive power: 55 kW Infeed opening: 550 × 180 mm Rotor diameter: 600 mm Rotor speed: 730 rpm Throughput capacity: up to 10 cubic meters/h Wood chip length: approx. 25 mm Screen hole diameter: 30 mm Vibrating screen: 3 screen levels Material separation: 4 fractions

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, Tedezdklpspfx Antob pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Todozuzf Iepfx Antjb Type: CMM CONTURA 9/18/8 Year of manufacture: 2020 Operating voltage: 100–240 V Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it - Zero significant component replacements - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine Type CNC long-turn lathe / long-turning machine Manufacturer Maier Werkzeugmaschinen Model ML 18 B Year of Manufacture: 2002 Machine/Serial No. 01/117 Control System: GE Fanuc Series 18i-T Axes: 6 Maximum number of tool positions: 12 Main Spindle C-axis + 5° mechanical indexing Counter Spindle C-axis + 5° mechanical indexing Tjdszuy S Hopfx Antjb Connected Load 16 kW Rated Current 60 A Control Voltage 24 V DC Wiring Diagram No. 1303-E200 Coolant Integrated coolant treatment / filter system Bar Feeder FMB Turbo 3-26/3200/C, Year of Manufacture 2001 Chip Conveyor Maier ML-SF

Condition: good (used), Year of construction: 2006, production capacity: 18 unit/h, For sale: KHS mixer, capacity 18 m³/h, manufactured in 2006, model KHS INNOPRO CMX-18. Attached are photos of the mixer and its nameplate, as well as a schematic diagram of the pumps and valves. The machine will be available starting in October 2026. It is in good technical condition and currently operates without any problems. Net price (ex-works Gorzanów): 60,000 EUR. Tsdpjzu Ni Ijfx Antsb

Condition: good (used), functionality: fully functional, Weld edge former - Italy Tsdpfxezutnus Antob

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Tjdpfezr I R Eox Anteb Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: used, This listing is for the KNF Neuberger Diaphram Pump PM16209-122 The unit is in full working condition and is ready for immediate release Tedpfx Aexv A Rbontjb Description: A compact and corrosion-resistant pump suitable for general laboratory use. Technical Features: 100% oil-free transfer Pure transferring, evacuation, and compression of gases Version for slightly aggressive or corrosive gases and vapours Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10⁻³ mbar x l/s (not tested in serial production) Series N 022 diaphragm pumps are single-head, dry-running devices designed for a wide range of laboratory applications

Condition: like new (used), 4100 litres. New, 2 units Tjdpexz Hxgsfx Antob

Year of construction: 2021, condition: used, machine/vehicle number: 117500730003, Temperature control unit from the manufacturer Regloplas, used and in untested condition. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates in a two-circuit system with the RT100 control system. Pressurized water is used as the medium, and the maximum supply temperature is 160 °C. The heating capacity is 18 kW, and the pump performance is 2 x 60 l/min & 6.0 bar. The unit is equipped with two magnetic coupling pumps (Speck CY-4281). The year of manufacture is 2021, and the total weight is 230 kg. Todey Suikspfx Antjb

Year of construction: 2021, condition: used, machine/vehicle number: 117500730004, Temperature control unit from the manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates in a two-circuit system with the RT100 control system. Pressurized water is used as the medium, and the maximum supply temperature is 160 °C. The heating capacity is 18 kW, and the pump capacity is 2 x 60 l/min and 6.0 bar. The unit is equipped with two pumps (CY-4281.0823). The year of manufacture is 2021, and the total weight is 230 kg. Tjdpfxoy Suhyo Antsb

Year of construction: 2026, condition: like new (used), functionality: fully functional, machine/vehicle number: 95-14-16, As new Compact spiral freezers for sale 2 Available Built in 2026 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator Available with refrigeration Tsdpfszrwngex Antsb Message and we will send over the full spec with more photos

Condition: used, mileage: 153,000 km, power: 235 kW (319.51 HP), first registration: 12/2023, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Isuzu Citiport 18 articulated bus with 45 seats & 110 standing places - air conditioning - ZF EcoLife automatic transmission - matrix display system - * Diesel - 8,900 cc³ - 269 kW - 366 hp - Euro 6 - green environmental badge - new TÜV inspection - from first owner - * 45 seats + 1 driver + 1 wheelchair space with manual wheelchair ramp - 110 standing places * Auxiliary heater / radio / ABS / ASR - 3 x double-width doors - LAWO LED matrix display system - * Vehicles are equipped with ZF Ecolife transmissions and the large TECTOR engine * Vehicles are in their original white color and currently wrapped in pink for rail replacement service * Vehicle dimensions: Length: 18,200 mm x Width: 2,550 mm x Height: 3,136 mm * German vehicles - German vehicle registration documents - price is per vehicle - * Errors / printing errors & prior sale reserved - vehicles available immediately - * Please make an appointment for viewing & test drive * Contact person: Andreas Vogel * ATTENTION - Vehicles are stored outside - Please inquire about the exact location - ATTENTION - Tsdpfx Ajzwi Ivsntjb

Condition: used, maximum load weight: 10,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2015, loading space length: 7,158 mm, loading space width: 2,505 mm, loading space height: 2,250 mm, total length: 9,910 mm, total width: 2,600 mm, total height: 3,665 mm, Equipment: ABS, SCHMITZ CARGOBULL ZKO 18/L – REFRIGERATED/ISO SEMI-TRAILER – AIR SUSPENSION – LBW 2.5 T ----VEHICLE HISTORY * German vehicle * Video of the vehicle available upon request (interior & exterior views) ----Schmitz Cargobull Refrigerated Semi-Trailer / Through-Loader General* Manufacturer: Schmitz Cargobull * Type: ZKO 18/L FP 45 COOL DL * Vehicle type: Refrigerated semi-trailer / Through-loader Internal dimensions* Length: 7,158 mm * Width: 2,505 mm * Height: 2,250 mm Chassis* 2 axles * Schmitz axles * Air suspension * Disc brakes * WABCO braking system Tires* 385/65 R22.5 Tail lift* PALFINGER MBB C2500 * Year of manufacture: 2015 * Serial number: 83518569 Tsdpozt Ubyefx Antob Equipment * Through-loader * Reversing camera * WABCO parking sensors * Work light * Side marker lights * 2x storage boxes * ASW Weights* Permissible total weight: 18,000 kg * Axle load 1: 9,000 kg * Axle load 2: 9,000 kg Other* WAP Fahrzeugtechnik ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least 500.00 / 1,000.00 is required. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see website Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), functionality: fully functional, Additional photos can be provided upon request. The price is negotiable. For more machines, parts, and other materials, please visit our website, CNC-Service. Tedezu Nlcspfx Anteb Do you have any questions or are you looking for something specific? Please do not hesitate to contact us!

Condition: used, maximum load weight: 24,490 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2018, Equipment: ABS, Kögel Plane Mega Liner S 18 Edscha, hydraulic lift roof, color: white-black, 2-axle 2 axles Payload: 24,490 kg Tires: 445/45 R 19.5 SAF axles Edscha tarp Sliding tarp Hydraulic lift roof with a total lifting height of 500 mm Floor 30mm thick, waterproof plate floor, cut edges sealed all around, continuous, waterproof bonding between chassis and floor plate with a durable, high-performance adhesive. Strength according to EN283, for floor loads up to a maximum of 7,000 kg forklift axle load. Premium visible sealing Accessories: Steel corner posts at the rear outside as a trapezoidal box, Delta rubber corner profile at the rear across the rear frame, pallet stop on the side rail, left, welded, approx. 20mm high Pallet stop on the side rail, right, welded, approx. 20mm high Steel front wall, continuous, with sturdy corner reinforcements, front wall reinforced on the inside with a screen-printed plate Loading area: 13620 x 2480 x 3000 mm Fifth wheel height unladen: 975 mm Multilock outer frame, universal cargo securing system every 100 mm Todpfxezxix De Antob Sliding step ladder at the rear Side marker lights in LED design 1 rear fog light 1 reversing light 10-year Krone manufacturer's warranty against rust-through Detailed construction description of the semi-trailer will be sent upon request. Tested cargo securing (EN 12642 XL)

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Todpfjzrf Nrox Antob Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, maximum load weight: 10,940 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2014, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, loading space volume: 40 m³, total width: 2,600 mm, total height: 3,600 mm, Year of construction: 2014, Equipment: ABS, tail-lift, * Can be loaded through the front flap * Drawbar extendable * Frigoblock EK 25 U refrigeration unit, 380 V Tsdpfx Anst Hzx Ejteb * Aluminum floor * 2-ton Bär loading platform * MB axles * Disc brakes * Air suspension * Rear view camera Price as is.