Used Knoll 750 K-3/650 for sale (81,862)

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg Cedjphvl Topfx Aipjrc good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Year of construction: 1989, condition: used, length in total ca. 3500 mm band width ca. 700 mm conveying height ca. 1200 ejection height approx. 1200 mm Crsdpora Rrtsfx Aipoc weight ca. 800 kg dimensions of the machine ca. ca. 3500 x 1300 x 1650 m

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Codpfjzbtz Ajx Aipsrc Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, drive controller -Manufacturer: Nord, NORDAC vector mc frequency converter -Type: SK 750/3 FCT 278007550/28E300094075 -Power: 1.5 kVA motor 0.75 kW -Input: 3AC 380/460V 47/63Hz -Output: 3 AC 0-Input V 0-400 Hz Cjdpjn Tvb Iofx Aipsrc -Control Box: MC 278900000/23E300087776 -Dimension: 200/110/H135 mm -Weight: 1.7 kg

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility Cedexcwxgspfx Aipjrc - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: used, Krauss Maffei Motherboard Credpfxju Axiho Aipec

Condition: used, suitable for Fendt 1000 Vario / Cedpfx Aoucqd Isiporc

Condition: used, mileage: 175,652 km, power: 132 kW (179.47 HP), first registration: 11/2019, fuel type: diesel, tire size: 235/65/16c, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, CO₂ emissions: 161 g/km, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, loading space length: 4,300 mm, loading space width: 2,130 mm, loading space height: 2,230 mm, Year of construction: 2019, Equipment: air conditioning, electric window regulation, navigation system, spoiler, tail-lift, Technical information Number of cylinders: 4 Engine capacity: 1.968 cc Tyre size: 235/65/16c Suspension: leaf suspension Drive: Wheel Crsdov D Ng Aopfx Aipec Weights Empty weight: 2.874 kg Carrying capacity: 626 kg GVW: 3.500 kg Functional Tail lift: D HOLLANDIA, tail lift Make of bodywork: ALUVAN = Additional options and accessories = - Roof spoiler

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 Csdpfx Aiszbtzpspsrc - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm Crjdpfozbiguox Aipec - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Traub TNX CNC lathe, chip conveyor by Knoll, model 400 K-1/100, scratch conveyor for chips, e.g., for brass chips. Csdpszbtvyofx Aipsrc

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall * Loading height 550 mm Credeym Ihhepfx Aipjc Errors and prior sale reserved

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm - Drilling depth 750 mm Csdpfxoxzz He Aiporc - Filter - Pump

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, overall weight: 320 kg, Universal Lathe 330 × 750 mm The machine is designed for machining workpieces, most commonly with surfaces of rotational solids (shafts, cones, spheres, internal and external threads). The machining tool is usually a turning tool, drill, or threading tools. Thanks to modern solutions and equipment, the lathe is perfectly suited for professional and industrial work. Equipment 3-jaw chuck 160 mm Coolant system Dead center MT3 Lathe stand Change gears for thread cutting Work light Optional equipment 2-axis digital readout (DRO) Technical Specifications Turning diameter over bed – 330 mm Cedpfx Aisyvfzqspsrc Maximum workpiece length – 750 mm Maximum turning diameter over cross slide – 220 mm Chuck – 160 mm Spindle bore – 38 mm Spindle taper – MT5 Number of metric thread types – 20 Metric thread range – 0.5 – 4 mm Inch thread range – 9 – 40 T.P.I. Longitudinal feed – 0.135 – 1.80 mm/rev Tailstock quill travel – 70 mm Tailstock taper – Morse 3 Number of spindle speeds – 12 Spindle speed range – 60 – 1650 rpm Motor – 1.1 kW Dimensions (L × W × H) – 1330 × 750 × 700 mm Weight – 320 kg Delivery to the customer is possible. Delivery cost is determined individually according to the transport company quotation. If you are interested in other machines, please visit our website.

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Crjdpsk Abazsfx Aipec For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Crjdsk Abuispfx Aipec Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 Csdpfx Aisk Aa Ukjpsrc RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Crsdsk Abcgopfx Aipjc Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Cjdek Aa T Rspfx Aipsrc Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8830x67x1,6 mm cutting width 1,6 mm Cedpfxsy S Duie Aipsrc Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 1300 total power requirement 7,5kW / 3100 Nm weight of the machine ca. 5100 kg dimensions of the machine ca. 2100x1550x4450 mm The KSY 650 X 1300is a semi-automatic and column-guided horizontal bandsaw. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 27 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 115 rpm, bed width: 135 mm, overall weight: 160 kg, METAL TECHNICS POLSKA Professional CNC machines, laser systems and metalworking equipment We are a manufacturer and importer of high-quality metalworking machinery. We supply proven technologies from Poland, Europe and Asia used by hundreds of companies across Europe. For more than 12 years, we have focused on quality, precision and reliability. TYTAN 750 PREMIUM UNIVERSAL LATHE 0.75 kW / 230V WITH STEADY RESTS The TYTAN 750 universal lathe is a reliable and precise machine designed in a simple and practical way. It is perfectly suitable for home workshops, schools and industrial applications. The machine is equipped with a double prism bed for increased rigidity and machining precision. !!! LATHE STAND NOT INCLUDED !!! !!! MACHINE AVAILABLE FROM STOCK – READY FOR IMMEDIATE SHIPPING !!! TECHNICAL SPECIFICATIONS: • Turning length: 750 mm • Swing diameter: 265 mm • Bed width: 135 mm • Spindle taper: MT4 • Tailstock taper: MT2 • Chuck diameter: 125 mm • Spindle bore: 27 mm • Metric threads: 0.2–3.5 mm/rev • Inch threads: 8–56 T.P.I. • Spindle speed range: 115–1600 rpm • Motor power: 0.75 kW • Machine weight: 160 kg • Dimensions: 1510 × 570 × 580 mm Standard equipment: • Change gears • Chip guard • 4-way tool post • 3-jaw chuck 125 mm • Chuck guard • Chuck key • Set of jaws • 2 dead centers • Fixed and travelling steady rests (2 times heavier and significantly stronger than in comparable models) • Arbor for drill chuck • Drill chuck NEW FEATURE! Tailstock locking system with quick eccentric clamp. Delivery conditions: • Brand new machine • 12-month warranty Crsdeyuc T Iepfx Aipec • Warranty and after-sales service • CE declaration of conformity • English operation manual included If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Crodpfjy Sl Azox Aipoc Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Conventional lathe Manufacturer: ZMM Sliven Huvema Inventory no. Model: HU310 x 750 Codpfx Ajy I Dqvjiperc Year of manufacture: 2007 Distance between centers: 750 mm Center height: 155 mm Swing over bed: 310 mm Spindle bore: 32 mm 3-jaw chuck Quick-change tool holder Voltage: 380 V Machine weight approx. 700 kg 3 units in stock!!!

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot Year of manufacture: 2017 Injection unit: Screw diameter: 70 mm Shot weight: 1,104 g Injection pressure: 2,175 bar Dosage volume: 1,213 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 750 x 750 mm Platen size: 1,110 x 1,165 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MOSAIC - touchscreen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h (automatic mode) Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 3 Hot runner control Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Parallel movements Cedpfxoy Sltyj Aipsrc Machine equipped with cylinder / nitrogen accumulator (additional charge for high-speed operation) Energy-efficient machine – features a system with three variable output hydraulic pumps Machine has been regularly serviced by authorized service in Germany Dimensions: Weight: 22,000 kg Length/Width/Height: 8.62 x 2.21 x 2.80 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the selected machine’s technical tests or participate in live technical demonstrations at our premises in Łódź. Price: On request

Condition: new, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 300 mm, loading space volume: 0.7 m³, suspension: other, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, THE NETHERLANDS! Manufacturer UNITRAILER Product code UT004047 Model Garden Trailer 230 tipper max. GVW 750 kg Length of loading area 2304 mm Width of loading area 1256 mm Tire type 155/70 R13 Spare wheel with holder optional Where are the wheels located outside the load compartment? Type of suspension unbraked axle up to 750 kg Crsdpfjir H Sqjx Aipjc Number of axles 1 Drop sides steel Braked no Dropside height 300 mm Type of loading area made of screen-printed floor panel Tipping mechanism yes Use Removals ,Internal transportation of goods Tare weight 129 kg Total capacity 620 kg Plug type 7-pin, possibility of using an adapter plug 13 to 7-pin GVW min. 300 kg Reversing light No Trailer UNITRAILER Garden Trailer 230 KIPP What's new with our latest KIPP model? Our new model is finally here! The new KIPP series is characterized by new, improved features: - The new model has not only been equipped with a new hinge structure for the side walls, but also has a new, unique side wall design. - The ribbed surface of the side walls guarantees safe use and no sharp edges. - The bottom edge of each side panel has been flattened to improve your safety when loading and unloading your goods. - The new side walls are 30 cm high, which means they are more compact than ever before! - We have made this model even more user-friendly. It features such design changes as improved spacing between hooks for tarpaulin cords as well as an improved folding drawbar structure, which greatly reduces the need for a lot of trailer storage space. - The bows have also been redesigned, which means that the frame beams are easier to fit. When you buy our trailer in a set with a high frame, you get more vertical beams, which increases the stability of the entire structure. No more water on the tarpaulin! - This model has been equipped with revolutionary rear wall stops - improving the safety of the rear wall when the trailer is placed upright. Not only do you save a lot of space, but you also secure the structure of your rear wall. Transport trailer UNITRAILER Garden Trailer 230 is the latest product from UNITRAILER. This model is currently our second largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate. This makes loading and unloading possible in just a few minutes. The tiltable drawbar allows the trailer to be positioned vertically on the rear wall. We take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register it to be able to use it fully. The purchased car trailer will be shipped within 48 hours with the complete set of documents. Buy online now! The car trailer is both tiltable and very robust. Shipping from: 129€