Used Kolbus Hd 140.P for sale (45,021)

Condition: used, Three Knife Trimmer Kolbus HD 140.P with Copilot and automatic infeed Dreimeserautoat / Three Knife Trimmer Kolbus HD 140 P Baujahr / Year 2000 - Serial-No. 347 Format / Size max 305 x 420mm Fedpfsyb Swvjx Afusgh Formatbereich beschnitten / Size (trimmed) min. 100 x 100mm - max. 300 x 400mm Buchblock Stärke / Book block thickness min. 2mm - max. 80mm Stapelhöhe / Feeding height 80mm Mechanische Laufleistung / Speed max. 3.900 c/h Rechtseinfuhr / Infeed from right Equipment: Copilot automatic infeed automatical speed Regulation automatic lock of knife adjustment and pressing block automatic setting of bookblock pressure Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Fodpfx Afjz Eaq Iouegh Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2015, Three knife trimmer Kolbus HD 143.P Year: 2015 Fjdpfjzx S Rijx Afuogh For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Cycles: 12,9 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: up to 4.200 cuts/h Maximum size (uncutted): 450 x 320 x 80 mm Maximum size (cutted): 420 x 305 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum pile height: 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Equipment: Counter 22 Mio Fgsdpfxjy Tacxj Afujh Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: excellent (used), Year of construction: 2004, Ref:11162 . 2004 Kolbus Publica KM410.C High speed perfect binding line. Comprising: 15 x stream feeders with extended infeed for log loading 30 x ZU841C gatherer with interchangeable top-loading feeders for folded sections and single sheets Hand feed station Automatic thickness control AS 800 reject station for over or incomplete books with length & width monitoring Raceway/transfer with vibrate unit Publica binder type KM410.C with 24 clamps with ‘Co-Pilot’ Milling/brushing, equalizing milling, ‘Micro’ notching & brushing units LH370 EVA pre-melt units 2-shot EVA hot-melt spine glue tank EVA hot-melt side glue unit I.R. heating in radius for increased glue open time SAL410A Stream cover feeder with four-line scoring Cover nipping/pressing station Delivery system with lay-down device and reject station Conveyor system including cooling tower to; Fgedpfxsz I Tz Se Afush Kolbus HD152.P pile trimmer with ‘Co-Pilot’; Rima RS-3310S compensating book stacker to; Specification: Book size, Max: 420 x 290 x 65 mm Max: 420 x 305 x 20 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 15,000 cycles/hr

Year of construction: 2024, condition: used, KOLBUS Box Production Line BLP 500 + BLF 500 year 2024 The corner punch BLP 500 is used for punching cross grooved boards and the box line former BLF 500 is used for production of rigid boxes from cross grooved and corner punched boards. Overview: BLP 500 box line puncher BLF 500 box line former Configuration: BLP 500 box line puncher · copilot system with touch screen · 1 set (4 pieces) of knife holders · 5 sets (40 pieces) of knives · 3 sets (12 pieces) of cutting sticks · waste delivery out of the machine via transport conveyor · servo-controlled drive technology based on Siemens technology · infeed with cardboard feeder CF 500 · delivery incl. inline coupling with box line former BLF 500 Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 4 mm cardboard thickness min.: 1,5 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 15 mm BLF 500 box line former · copilot system with touch screen · cold glue device with 1 set (4 pieces) 0,3 mm gluing nozzles for gluing grooves · box forming device to turn-up of the side panels · holding station for glue drying · servo-controlled drive technology based on Siemens technology · infeed incl. inline coupling with box line puncher BLP 500 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm Fodpfx Afez E Riujusgh cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 4 mm cardboard thickness min.: 1,5 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 15 mm

Condition: used, Year of construction: 2007, Format: 1360 x 1200 mm Equipment: Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hr Automatic Palletizing product infeed via accumulating conveyor Pallet dimensions: 1360 x 1200 - 1000 x 800 Fjdpfx Asyxqvgjfusgh travel stop for dropping of very smooth products pallet removal in moving direction Pallet sizes 1,360 x 1,200 or 1,000 x 800mm Speed 30 Stacks/min

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Fodpfx Aezkbr Tsfuegh Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Year of construction: 1996, condition: used, Dust extraction system, fume extraction system, self-cleaning filter, cartridge filter for plasma cutting, laser cutting, sandblasting, and shot blasting. The filter is cleaned pneumatically with pulses of compressed air during operation, which ensures high efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: STURM Model: 3-7x20/140 DLR P Year of manufacture: 1996 Engine power: 7.5 kW Capacity: 4200 m3/h Fodoif Rlujpfx Afuegh Inlet diameter: 200 mm Cartridge filter elements: 7 pcs. Filtration area: 140 m2 Includes electrical diagram and partial ductwork.

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² Fodpjz I Tm Ijfx Afujgh At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: reconditioned (used), Year of construction: 2006, Casemaker - device for processing center strip rolls - processing hot-glue - viscosity control device - board center strip magazine - board cutting device PS Fjdjv Uh Nkspfx Afusgh - device for producing quarter-bound cases in 2 passes - device for processing of asymmetric cases

Condition: reconditioned (used), Year of construction: 2008, Palletizer - automatic format adjustment - product infeed via accumulating conveyor - turning paternoster 0° / 90° / 180° with cycle adjustment device - pallet magazine open at the top (for max. 20 pallets) - slip sheets feeder incl. separating air - travelling stop for setting down especially smooth products - pusher for products > 1 mm Fgedpevyg Ehefx Afueh

Condition: good (used), Year of construction: 2018, machine/vehicle number: 14418098, Offer 19370 Technical data: Fgsdpfx Aszgcywsfujh - Volume flow rate approx. 1447 m³/h. - Negative pressure 2200 Pa - Filter area 9.5 m² - Drive power 400 V / 2.2 kW - Space requirement W 1750 x H 2150 x D 900 mm - Weight approx. 350 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pulsotronic M-Pulse 2 Metal Detector with Conveyor Brand: Pulsotronic-Anlagentechnik GmbH Type: M-Pulse 2 BD-HD 350x150 LPW MFT Year of manufacture: 2018 Serial number: 90007273 Voltage: 115/230 VAC Frequency: 50-60 Hz Fodpfx Aoyr S Nmefuegh Detection opening dimensions: 350 x 120 mm Belt width: 240 mm Overall dimensions: 3500 x 900 x 1300 mm The Pulsotronic M-Pulse 2 metal detector is an advanced quality control system from 2018, essential for ensuring food safety in production processes. The device is designed for precise detection of metallic contaminants in products transported on the integrated belt conveyor. With a detection opening of 350 x 120 mm and a robust stainless steel construction, the system is perfectly suited for the food industry, guaranteeing maximum detection sensitivity and easy maintenance of hygiene.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 285, KOLBUS PE 0 – Hot Foil Stamping and Embossing Machine for Hardcover Covers Identification Data • Manufacturer: Kolbus GmbH & Co. KG, Germany • Type: PE 0 • Serial number: 285 • Year of manufacture: 1984 Purpose and Technology • Purpose: Hot foil stamping and embossing on hardcover book covers • Operating principle: Flat press head – the cover is fed onto the working table, while the upper head performs the stamping • Capabilities: Hot foil stamping and blind stamping/embossing, depending on the installed tooling • Foils: Gold, silver, pigment, and other hot-foil materials • Operating temperature: Approximately 130–170 °C, according to the markings on the machine, depending on the foil and application Fodpfez A A Azsx Afujgh Construction and Equipment • Infeed and outfeed tables with conveyors on both sides of the press head • Automated cover feeding and transport • Belt drive with drive motor • Protective covers over the drive components • Control panel with buttons and selectors • Cycle counter • Safety devices and emergency stop buttons • Large flywheel – mechanical press operating principle • Mobile design for relocation within the production area Format and Productivity – Estimated • Format: Suitable for A5 and A4 size covers • Productivity: Approximately 1,000–2,000 impressions/hour • Productivity depends on: Format, type of foil, number of impressions per cover, impression length, and operating method Price: €14,000.00

Condition: reconditioned (used), Year of construction: 2005, Palletizer - product infeed via accumulating conveyor - rotary paternoster 90° / 180° inkl. synchronisation - pallet magazine left hand for 8 pallets - intermediate layer feeder left hand - travel stop for dropping of very smooth products - pallet delivery straight - pallet removal in moving direction Fjdsv Tu U Rjpfx Afuogh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, PULSOTRONIC M-Pulse2 BD HD 650X150 MFT | Metal Detector Manufacturer: PULSOTRONIC-Anlagentechnik GmbH Model/Type: M-Pulse2 BD-HD 650x150 MFT Serial number: 90008573 Year of manufacture: 2020 Power supply: 115/230 V | 16 A | 50-60 Hz Overall dimensions: 1700 x 1100 x 1250 mm Conveyor dimensions: 1200 x 610 mm Aperture: 650 x 150 mm Fgjdezagnmspfx Afueh System operating pressure: 4-6 bar The Pulsotronic M-Pulse2 BD HD, a professional conveyor metal detector, is an advanced X-ray and magnetic inspection system designed for the highest standards of safety and quality control in the food industry (meat, processing, bakery) and logistics. Thanks to the use of multi-frequency technology (MFT), the device features exceptional sensitivity in detecting ferromagnetic, non-ferromagnetic contaminants, and stainless steel, effectively eliminating the influence of the so-called "product effect" (common when inspecting moist meat, cheese, or fresh baked goods). The wide detection head with an aperture of 650 mm x 150 mm allows for the simultaneous inspection of a wide stream of loose products, large blocks of raw materials, or finished dishes in bulk and individual packaging. The integrated conveyor system, with dimensions of 1200 x 610 mm, guarantees complete stability in handling the product range. The system is prepared for an automatic pneumatic reject system (4-6 bar power supply required), which eliminates defective batches of goods without stopping the entire production line.

Condition: used, Year of construction: 1994, Casing in machine Kolbus EMP 594 Age: 1994 For casing-in of flat spine, rounded or backed book blocks into hard covers. To be used as an individual machine or as a unit within book production lines. Configuration: • block supply via manual feeder • block splitter • case prestacking conveyor • case magazine • case bending machine Fgodpfx Ajzf Hncjfueh • case forming station (case forming rail – special profiles no. 2 - 19 and no. 21) • casing-in station • gluing attachment with profile rollers and adjustable, double glue application for the gauze area • glue circulation system with pump • pressing station • delivery to the left with delivery belt, flat lying book transport Technical specifications: mechanical speed: up to 50 cycles/min size range book block max.: 270 x 370 x 80 mm size range book block min.: 100 x 100 x 4 mm size range opened case max.: 630 x 375 mm size range opened case min.: 210 x 100 mm

Year of construction: 2019, condition: like new (used), The temperature control unit from technotrans is available for sale; the unit features high-quality equipment.....6 months warranty, .....Operating hours: 24 hours Medium: Water Temperature range: max. 140 °C Heating capacity: 6 kW Cooling capacity: 70 kW, indirect (heat exchanger) Pump capacity: 86 l/min Fodpfx Aeyub S Nofusgh Pump pressure: max. 5.5 bar Frequency inverter for pump speed control USB connection Touch display

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Fgodpfx Aszp Dn Ijfush Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm Fgjdpfozcuz Hsx Afuoh - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 1995, functionality: fully functional, USED PLASMA CUTTING TABLE SOITAB 4x2 m, WITH HYPERTHERM MAX 200 GENERATOR, overhauled and with new CNC. MAX THICKNESS 40mm IN STEEL MAX THICKNESS 20mm IN STAINLESS STEEL Fjdpfxjzh Dg Io Afusgh Comes fully overhauled with new CNC checked and installed by the customer, with a training course included. Time to complete the work: 30/40 days. Turnkey price includes used filter but excludes electrical connections and the smoke duct from the filter to the roof.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Fsdox Rut Tspfx Afuogh Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: used, Year of construction: 1972, machine/vehicle number: 275, Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EPYear 1972 - Serial-No. 275 Size max: 405 mm Fsdpfxjh Axdlo Afuogh Accessories: 2-corner-pulling-heads Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers. Fedpex Ruudsfx Afuegh