Used Kraus 132L2S0 for sale (296)

Condition: good (used), Three-phase motor, electric motor -Power: 11 kW -Frequency: 50 Hz -Speed: 2950 rpm -Frequency: 100 Hz -Speed: 5900 rpm -Shaft: Ø 35 mm -Design: B3 Kdjdpjb A Rrnofx Aktsl -Protection class: IP 55 -Dimensions: 520/210/H350 mm -Weight: 65 kg

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Kodpfx Akogvvn Ejtsdl

Condition: good (used), Control load switches, RCBOs, motor protection switches, reversing switches -Type: CG8 D-V226-602 FS1 -without: gearshift knob -Price: per piece -Number: 22 switches available -Weight: 0.6 kg Kdjdpfxjb A I Sio Aktsl

Condition: good (used), Year of construction: 2001, functionality: fully functional, KKT Kraus chiller model KLC-S 17T-RS with current refrigerant R407c. The water chiller has been tested at full load against a counter-heater, with no faults detected. Net price ex works, packed and loaded onto truck. Kjdpfx Akoyk Hlaetedl

Condition: like new (used), Year of construction: 2017, Manufacturer: Kraus Kdjdpfx Asnr Hfyektol Year of manufacture: 2017 board length: 1600 board width: 1400 Roller diameter: 100 mm, material: steel. Axle distance between rollers: 120 mm Load capacity: 2000 kg Lifting height: 1700mm Without hydraulic power supply unit! Chain drive, with gear electric motor. 1.1kW, 400V, 50Hz

Condition: excellent (used), Year of construction: 2005, Manufacturer: Kraus Kodpfx Aenxkagsktedl Type: RBA 89 Year of manufacture: 2005 Load capacity: max. 1500 kg/pallet Roller width: 1380mm Track width: 1450mm Roller diameter: 100mm Axle distance between rollers: 120mm Total length: 3000mm Power: 0.75kW / 28 U/min Speed: 21 m/min Optionally with legs.

Year of construction: 2005, condition: excellent (used), Manufacturer: Kraus Type: RBA 89 Year of manufacture: 2005 Load capacity: max. 1500 kg/pallet Roller width: 1380mm Track width: 1450mm Kjdpfjnxkbpjx Aktodl Roller diameter: 100mm Axle distance between rollers: 120mm Total length: 1500mm Power: 0.75kW / 28 U/min Speed: 21 m/min Optionally with legs.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 300 V 165 Hz -Power output: 25 kVA Ksdpfeb Rynxox Aktsdl -Dimensions: 800/400/H320 mm -Weight: 200 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 35 rpm -Power: 1.1 kW Kedpfx Akjcg Ambjtedl -Design: B3 -Shaft diameter: Ø 48 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 590/300/H400 mm -Weight: 60 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Kjdpjxg Hxwofx Aktedl

Condition: good (used), Kraus and Reichert Kuris KVS700 Straight Knife Fabric Cutter Condition: Used and tested for functionality. _RD 6 kg Find more textile machines - new and used - in our shop! International shipping costs on request! Kedpfx Akspitkgjtsdl

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 400143087, (NEW)(UNUSED) KRAUSS MAFFEI ANDRITZ Horizontal Peeling Centrifuge, in Stainless Steel, Model HZ180/7.1, Series: 400143087, Year 2017, Basket speed 820 rpm, Basket size 1800 mm diameter X 1250 mm long. Centrifugal force 675 g at maximum speed. 7.1 m2 filtration surface. Includes control panels. Missing: Motor, lubrication module, instrumentation and hydraulic pump. Please Inspect. Kjdpfjy Sin Isx Aktedl (NUEVO) Centrifuga Pelador KRAUSS MAFFEI ANDRITZ Horizontal, en Acero Inoxidable, Modelo HZ180/7.1, Serie: 400143087, Año 2017, Velocidad de la canasta 820 rpm, Tamaño de cansta 1800 mm de diametro X 1250 mm de largo. Fuerza centrifuga 675 g a velocidad máxima. 7.1 m2 superficie de filtración. Icluye paneles de control. Faltantes: Motor, Modulo de lubricación, instrumentación y la bomba hidráulica. Favor de Inspeccionar.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm Kdsdpfx Akeyyyr Totjl • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN Kjdpfxeyyxmvj Aktjdl • Max. opening stroke: 920 mm • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C Kjdpfoyyxc Dox Aktsdl • Availability: Early 2027 Additional equipment • Handling: Wittmann robot system • Model: W743 • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 40,535 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 1.5 kg • Minimum mould dimensions: 480 mm • Tie bar spacing: 900 x 800 mm • Maximum mould opening: 1530 mm Kodpfx Asy Tk Thsktjdl • Working hours: 40,535 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,519 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details. Kdsdpfx Aksy Tai Ejtel • PP injection capacity: 1.5 kg • Mould dimensions, min.: 480 mm • Tie bar spacing (H × V): 900 × 800 mm • Maximum mould opening: 1530 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,858 h, clamping force: 4,200 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine. • Injection capacity (PP): 1.2 kg • Minimum mould dimensions: 380 mm • Tie bar spacing: 800 x 800 mm • Maximum mould opening: 1400 mm • Working hours: 44,858 h Kdjdpfx Akjy S Tw Hetel

Condition: ready for operation (used), Year of construction: 2012, operating hours: 46,424 h, clamping force: 3,500 kN, screw diameter: 80 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Minimum mould dimensions: 380 mm • Tie bar spacing: 710 × 710 mm • Maximum mould opening: 1260 mm Kdedpfx Asy S Tvvjktel

Condition: ready for operation (used), Year of construction: 2012, operating hours: 49,627 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. Kedpfx Aoy S Tq Hjktedl • PP injection capacity: 640 g • Mould dimensions (min.): 320 mm • Tie bar spacing: 630 × 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,627 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,533 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. Kdjdpfx Akjy S Tqastjl • PP injection capacity: 640 g • Minimum mould dimensions: 320 mm • Tie bar spacing: 630 x 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,533 h

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Mold opening (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Opening width: 1,300 mm Kdedpfoxu Uvajx Aktol Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement volume: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed Standard / Option: 1/min. 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle clamping force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 19526ä

Condition: excellent (used), Year of construction: 2017, Krauss Maffei KM 350-3000 CX injection molding machine Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on industrial PC technology with real-time Ethernet, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running processes (ProcessDesigner). Plasticizing unit Complete plasticizing unit for thermoplastics, with abrasive protection, 80 mm screw diameter, equipped with a backflow valve and an open nozzle. TECHNICAL DATA OF THE MACHINE – STANDARD VERSION Clamping unit Clamping force: 3500 kN Opening force: 221 kN Dimensions of the mounting plates (h x v): 1060 x 1095 mm Distance between columns (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Maximum opening width: 1300 mm Ejector stroke: 250 mm Ejector force front/rear: 95/49 kN Injection unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1855 bar Injection volume: 1608 cm³ Injection weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticizing rate: 109.5 g/s Electrical and hydraulic equipment Rated power of the pump motor: 75 kW Installed power of the heaters: 36 kW Number of heating zones in the cylinder: 7 Kdodpfxjy Tp Rlo Aktjl Dry cycle time / stroke according to Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 dm³ Dimensions and weight Net weight including control cabinet: 16.3 t Machine dimensions (l x w x h): 7.21 x 2.17 x 2.25 m

Condition: good (used), Year of construction: 2010, Straight conveyor belt for automation (for example, 'ghost shift' intermediate buffer) Consists of two belts: one belt holds empty cartons, and the second belt holds filled cartons. Both conveyors are equipped with EUROMAP67. With this, the conveyors can be programmed together with the machine and the removal robot. Kdjdoy Spixopfx Aktel Manufacturer: KRAUSS MAFFEI Year of manufacture: 2010 Length of conveyors: 6.00 m each Total width of conveyors: 1.75 m

Year of construction: 2013, operating hours: 42,681 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details. • Plasticising Size: 180 • Plasticising Arrangement: H Kdodpfxsym Uv Ss Aktjl • Screw Diameter: 28 mm • Nozzle Radius: 10 mm • Nozzle Bore: 4 mm • 3 units available