Used Kraussmaffei Ersatzteil for sale (333)

Condition: used, Directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -comes from a Krauss Maffei 1000 t injection molding machine -Machine type: KM 1000/5000A Kdsdpjb R Ac Iofx Afdok -Valve manufacturer: Bosch -Type: 081WV10P1N126WS024/00AO -Type: -Max. Pressure: 315 bar -Tension -Dimensions: 850/600/H550 mm -Weight: 634 kg

Year of construction: 2017, condition: new, machine/vehicle number: 400143087, (NEW) KRAUSS MAFFEI ANDRITZ Horizontal Peeling Centrifuge, in Stainless Steel, Model HZ180/7.1, Series: 400143087, Year 2017, Basket speed 820 rpm, Basket size 1800 mm diameter X 1250 mm long. Centrifugal force 675 g at maximum speed. 7.1 m2 filtration surface. Includes control panels. Missing: Motor, lubrication module, instrumentation and hydraulic pump. Please Inspect. Kdjdsyf N Igopfx Afdsk (NUEVO) Centrifuga Pelador KRAUSS MAFFEI ANDRITZ Horizontal, en Acero Inoxidable, Modelo HZ180/7.1, Serie: 400143087, Año 2017, Velocidad de la canasta 820 rpm, Tamaño de cansta 1800 mm de diametro X 1250 mm de largo. Fuerza centrifuga 675 g a velocidad máxima. 7.1 m2 superficie de filtración. Icluye paneles de control. Faltantes: Motor, Modulo de lubricación, instrumentación y la bomba hidráulica. Favor de Inspeccionar.

Condition: excellent (used), Year of construction: 2001, operating hours: 30,750 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, injection weight: 278 g, mold height (min.): 350 mm, opening stroke: 700 mm, The Krauss Maffie 200T has done low hours the controller MC4 . Heating zone 4 . Core pulls . very good condition . Kdjdpfx Afoy D A Rtjdjk

Condition: like new (used), 300 mm intermediate plate for Krauss-Maffei KM 800. Original Krauss-Maffei Kdsdpfxoh Hlr Es Afdsk

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Ksdpfx Ajikfmhofdedk

Condition: reconditioned (used), Year of construction: 2006, 160 tons Krauss-Maffei injection moulding machine built in 2006 with Sepro robot and transport-belt. Screw diameter 35 mm, 2 core pullers, 6 hot runner zones. This machine will be delivered " reconditioned " and can be shown under power ! Kjdpfx Afjh Dh Dusdjdk

Condition: like new (used), Year of construction: 2008, Krauss-Maffei horizontal injection molding machine with 120 tons of clamping force. Electric machine. Year of manufacture 2008. Control MC5. 63.000 working hours. 40mm spindle. Extras: anti vibration blades, 8 zones flow meter. Additional options: 1x pneumatic valve, 6 zones hot runner, Euromap 67 for Robot connection. The machine is delivered RE-Conditioned by our technical team and in optimal working condition. We can offer a start-up service at your premises. Technical Details INJECTION WEIGHT 185 gr INJECTION VOLUME 201 ccm Kdedpfsttgybex Afdsk WORKING HOURS 63000 YEAR OF MANUFACTURE 2008 DISTANCE BETWEEN COLUMNS 470x470mm PLATE DIMENSIONS 780x770mm CLOSING POWER 1200 kN INJECTION PRESSURE 1860 bar SPINDLE THICKNESS 40mm MINIMUM MOULD THICKNESS 200/450mm OPENING STROKE 850mm

Condition: reconditioned (used), We have several Krauss-Maffei MC3 control units that have been tested and are in good working order. Kjdpst Uzbpefx Afdjdk

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Kedpswq D Efofx Afdjdk Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Year of construction: 2001, condition: good (used), For sale complete clamping unit for Krauss-Maffei KM 350 with fix platen, moving platen, tie-bars, etc.. Kjdpfx Aoihppfefdodk This unit is complete checked by us.

Condition: reconditioned (used), Year of construction: 2006, operating hours: 60,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture 2006. Screw diameter 85mm. MC5 control. Approximately 60,000 working hours. The machine is delivered REFURBISHED by our team of technical experts and in optimal working condition. We can offer commissioning services at our customer's premises, ensuring full functionality upon installation completion. Technical Details Screw diameter: 85mm Injection pressure: 2242 Bar Injection volume: 2695 cm3 Injection weight: 2452g (PS) Year of manufacture: 2006 Working hours: 60,000 Minimum mould thickness: 550/1100mm (Min/Max) Maximum platen distance: 2100mm Opening stroke: 1600mm Tie bar distance: 1120x1000mm Kdedpfow Avafjx Afdjk Platen dimensions: 1600x1530mm Clamping force: 8000 kN

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 Kjdpjhy Nnbsfx Afdsdk SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: good (used), Krauss-Maffei Injection unit 220 (complete) with electrical screw drive. Screw diameter 40 mm Kedpfx Afefwcrnjdsdk

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Kedpfxsy D Adto Afdsdk Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange Kjdpfx Afexqhuuodjdk - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner Kdodpfx Afoyrd U Uedok - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Kedpfx Afsyf Uy Uodjdk Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine Kdedoh Dp R Eopfx Afdok complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: open: 105 kN close: 95 kN Mounting platen (h x v): 1,060 x 1,095 mm Clear space (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry cycle: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Operating capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / option: rpm 285/349 Screw speed standard or level 1: 95 PS Screw speed option or level 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit Kdjdpfx Aexu Uvasfdsk MC4 32-bit microprocessor control Integrated operating panel with TFT color display and 3.5-inch floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit, wear-resistant design, 70 mm screw diameter with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units Kdedpoy Aktmofx Afdek interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM420-2000CX Baujahr: 2010 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.078 cm³ Spritzteilgewicht: 981 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Kjdpfxey A Hl Es Afdsdk Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: CX250-1000 Baujahr: 2010 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Kdodewcb Nrjpfx Afdek Schnecken DN: 50 mm Max. Hubvolumen: 432 cm³ Spritzteilgewicht: 393 g/PS Steuerung: MC5 Ausstattung: Roboter, Krauss Maffei, Typ: LRX100S 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 1,470 kN, screw diameter: 50 mm, injection pressure: 2,000 bar, opening stroke: 500 mm, overall weight: 7,000 kg, Offered for sale: Krauss Maffei KM 150-1000 C1 injection moulding machine, year 1997, equipped with WITTMANN W711 Cartesian robot for automatic part extraction. Main specifications: Clamping force: 150 tons (≈1470 kN) Model: KM 150-1000 C1 Year of manufacture: 1997 Includes integrated WITTMANN W711 robot The machine is configured for industrial production and features an automatic handling system with a WITTMANN W711 robot, ideal for processes requiring automatic extraction and reduced cycle times. Suitable for manufacturing medium-sized technical parts in PP, PE, ABS, or other common thermoplastics. Kedpfx Ajyn Ilvefdsdk Available for inspection in Albacete, Spain. Additional technical information and operational video can be provided upon request.

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used Kdsdpoh Nmt Dsfx Afdek type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Year of construction: 2004, condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Factory Consists : 1. Injection Moulding machine -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm Kjdegbpnmepfx Afdodk - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 - Year - 2004 - Power - 110 Kw 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -