Used Kreuzmayr Pasteur Pa 750 Oil for sale (15,205)

Year of construction: 2025, condition: new, Additional installed holding section. After reaching the adjusted pasteurizing temperature of 90°C, to hold the juice on this temperature for 3 seconds, before it goes into the heated buffer tank of the filler. Bsdpegig Igjfx Ahmjdh

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  Bedpfx Aevptt Rshmsdh - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Year of construction: 2020, operating hours: 20 h, condition: as good as new (ex-display), The mobile Kreuzmayr units are used for the processing of fruit juices on site. The fruit is loaded into the washing container with the bin tipper, transported to the grinder, crushed and then conducted to the sieve belt press. The generated juice is automatically pumped into tanks, heated to about 80° C in the pasteurizer, and then filled into Bag in Box. The following machines are built on the trailer: • Bin Tipper Kreuzmayr GKE • Wasching and Crushing Unit KWEM 2000 • Single Belt Press KEB 750 with cleaning brush Bedpfx Ahec Rghyomjdh • Bigger juice pan for the KEB 750 • Pomance conveyor • Stainless steel tank 530 Liter with hanging sieve • Pasteurizer Kreuzmayr PAS 1500 Liter oil • Bag in Box filler Kreuzmayr KBF 2000 special construction for mobile trailer • Accessories: like pumps, air compressor, high pressure cleaner, hoses and fittings • Trailer with canvas cover, pneumatic brake system and antilocking system The trailer has only a few operating days and is thus in a new condition.

Condition: new, Year of construction: 2025, Kreuzmayr PA 500 pasteurizer for fruit juices, with pipe in pipe heat exchangers, including oil-fired boiler, temperature control, juice pump, Bdodpfob Ilnyjx Ahmoh mounted on stainless-steel chassis throughput: 500 l/h from 10°C to 80°C

Condition: good (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Description: For sale is a fully functional KREUZMAYR postmix container filling system, including filler, tanks, pasteurizer, and cooling unit, from the liquidation of a beverage industry production facility. Capacity: 2000 liters per hour (syrup). The system was last used in a professional beverage production facility and includes several components for the processing, pasteurization, and filling of postmix syrups. Ideal for: Beverage manufacturers Food production Syrup & postmix production Filling companies Components of the system: Tanks / Containers Mobile syrup tank 500 – CONTAINER KG – Year of manufacture: 2017 Mobile syrup tank 1000 – CONTAINER KG – Year of manufacture: 2017 Production & Filling Technology Postmix syrup pasteurizer (BIB & CT) – KREUZMAYR – Year of manufacture: 2017 Postmix container filler – KREUZMAYR – Year of manufacture: 2017 Cooling unit for postmix syrup – FISCHER – Year of manufacture: 2017 Details about the system: Application area: Pasteurization of postmix syrup (Bag-in-Box & Container) Condition: operational / functional Maintenance records and, if applicable, videos available Includes accessories and existing format parts Bodez Elmbepfx Ahmedh Special features: Industrial quality – ready for immediate use Ideal for beverage manufacturers / fillers System can be inspected in operation on site Professional dismantling organized

Year of construction: 2020, condition: new, Preinstalled mobil complete system inclusive Impeller juice pump, high efficient gas-boiler, heatexchanger and automatic temperature control. Components: Bjdpfx Ajcl Shvshmsdh Model on 2 fixed roller for heavy loads and 2 steering roller 160 kW Wolf gas boiler Hot water circulation pump Expansion vessel Automatic temperature control Stainless steel (1.4401) plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 2000l juice per hour Weight approx. 1000kg

Condition: new, capacity 750 l/h heater capacity 70 kW electrical power 1,1 kW electric outlet 400V 50Hz (three-phase) Bjdpfxeyw Hu As Ahmedh fuse 16 A dimensions: length 1 165 mm width 795 mm height 1 805 mm weight 463 kg Gas consumption liquid gas approx. 5.5 l/h Gas consumption natural gas approx. 7.5 m³/h Max. exhaust temperature: 210°C

Year of construction: 2012, condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) Bjdpfs Hnnhsx Ahmjdh with automatic control storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin max. weight: 1350 kg

Condition: new, Nominal capacity: 400 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx.: 35 kW Electrical Rating: 1.4 kW Bdsdpfxsdix Rcs Ahmjh Electrical Connection: 230V 50Hz (1 phase) Electrical protection: 16 A Dimensions: Length: 910 mm Width: 960 mm Height: 1 850 mm Weight (heating circuit drained): 260 kg Weight (heating circuit filled): 360 kg Heating oil consumption approx.: 3,5 litres/h Max. exhaust temperature: 180°C Noise level (LW, A): 83 dB Flue gas connection: ø 150mm

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Very well-maintained Paul double-blade saw, type KME 2 750 R, from a small workshop. Cutting height 125 mm. Cutting width 750 mm. Bodez Hcz Ejpfx Ahmjdh Hydraulic feed, continuously adjustable from 0 to 70 m/min. Hydraulic width adjustment with grid system. Installed drive motor, 31 kW. Safety device. Double anti-kickback protection with locking mechanism. Electrical control cabinet with control system. Zero-adjustment and blade guide. Various saw blades and spacer rings. Roller table for the infeed side. Optional 9 m long spiral roller conveyor for the outfeed side. Photos show the original condition.

Condition: used, Year of construction: 2025, Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens S7-1200 with a 12" Siemens HMI touch screen showing the full process mimic with zone temperatures. Year of manufacture 2025, new. Bdjdpfjz Eqdxjx Ahmjh Technical details - Year of manufacture: 2025, new - Capacity: 2,400 bottles/h at 500 ml, Ø 53 mm - Capacity: 1,800 bottles/h at 500 ml, Ø 70.3 mm - Capacity: 2,000 cans/h at 500 ml, Ø 66 mm - Container sizes: cans and bottles of 500 ml, 330 ml and 200 ml - Pasteurization temperature: +70 °C, 10 minutes residence time - Product temperature: +10 °C at the inlet, +37 °C at the outlet - Total production cycle: 41 minutes - Zones: 8 (3 x heating, 1 x pre-pasteurization, 1 x pasteurization, 3 x cooling) - Heating: steam, plate heat exchanger mounted on the side of the tunnel - Steam requirement: 143.6 °C at 3.6 bar, 130 kg/h in stable operation, 170 kg over the first 30 minutes at start-up - Water consumption: 0.2 to 0.3 m³/h in stable operation - Compressed air: 500 to 700 l/h at 6 bar - Total power consumption: 8 kW - Supply voltage: 400 V, 3 ph, 50 Hz; control voltage 24 V DC - Degree of protection: IP 54 - Overall dimensions: 6,500 x 2,200 x 2,200 mm (L x W x H) - Working area: 6.2 m², built from one module - Conveyor working height: 1,150 ± 50 mm - Material: AISI 304 stainless steel Equipment - U-shape tunnel, infeed and outfeed on the same end of the machine - Eight temperature zones with energy recovery between the zones - Plate heat exchanger for steam heating, mounted on the side of the tunnel - Siemens S7-1200 control system - Siemens 12" HMI touch screen with process mimic and zone temperatures - Electrical cabinet in AISI 304 stainless steel - Multi-row infeed and exit belt conveyors with Movex belt - Hinged inspection hoods over the treatment zones - Spray bars over the full tunnel length Condition and availability - New machine, year of manufacture 2025 - Available from 1 March 2027 - Location: Belgium

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 2,000 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 180 kW Electrical rating 1.8 kW Bdodjb Nt T Tepfx Ahmoh Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,715 mm Width 900 mm Height 1,900 mm Weight (heating circuit drained) 500 kg Weight (heating circuit filled) 600 kg Heating oil consumption approx. 19 litres/h Max. exhaust temperature: 180°C Noise level (LW, A) 83 dB

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve Bdjdozxnu Dspfx Ahmsh - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. Bdedpfx Ajzwxu Sshmsh The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 600 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating 55 kW Electrical rating 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,400 mm Width 900 mm Height 1,850 mm Weight (heating circuit drained) 330 kg Weight (heating circuit filled) 430 kg Heating oil consumption approx. 6 litres/h Bjdpfxob Nuqye Ahmedh Max. exhaust temperature 180°C Noise level (LW, A) 83 dB

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 1,000 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Bodpob Nudxofx Ahmodh Thermal rating approx. 90 kW Electrical rating 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,400 mm Width 900 mm Height 1,850 mm Weight (heating circuit drained) 350 kg Weight (heating circuit filled) 450 kg Heating oil consumption approx. 10 litres/h Max. exhaust temperature 180°C Noise level (LW, A) 83 dB

Year of construction: 2022, condition: new, Kreuzmayr puree compact system for pitting and straining various fruits. 2 pcs. destoning-passing machines mounted on the frame Mash tube heater and pasteurizer for 1000 kg/h output Oil or gas burners can be added to the boiler as required Bjdpfx Ahohx Ebyjmodh

Condition: used, Year of construction: 2002, - Brand : Oil & Steel / Nissan - Type : Scorpion 130 - Year of manufacture: 2002 - Hours: 4294 hours - Odometer: 61,205 km. - Weight: 3340 kg. - Drive: Diesel - APK: Working height: 13 meters - Lateral reach: 8 meters - Lifting capacity: 220 kg. - Aerial work platform book available - CE document available - Safety inspection possible - Dutch license plate - Export license plate possible - Video on our website - Trade-in and transport possible *Type: Scorpion 130 * Brand: Socage / Iveco * Construction year: 2002 * Hours: 4294 uur * Km. position: 61205 km. * Weight: 3340 kg. * Working height: 13 meters * Lateral reach: 8 meters * Lifting capacity: 220 kg. Bdjdjz Hw Nkopfx Ahmjh * APK: * Drive: Diesel

Year of construction: 2025, condition: new, consisting of: - Trailer - Washing Elevator KWEM 2000 - Apple Belt Press KEB 500 - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 750 - Bag in Box Filler KBF 2000 for mobile trailer - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . . Bodpfxscl Tvgs Ahmodh

Year of construction: 2026, condition: new, Compact and reliable mechanical decoilers for light and medium coil handling with multiple capacity options. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our mechanical decoilers are designed for efficient, stable and cost-effective coil handling in various industrial applications. These machines offer reliable unwinding performance with compact design and easy operation, making them ideal for press feeding lines and light coil processing systems. The system is based on a mechanical expansion mandrel structure combined with motor-driven rotation and adjustable speed control, ensuring controlled and stable coil feeding. AVAILABLE MODELS 750 kg Mechanical Decoiler 2.500 kg Mechanical Decoiler 4.000 kg Mechanical Decoiler TECHNICAL RANGE Coil Weight Capacity: 750 kg – 4000 kg Coil Width Range: 20 mm – 1300 mm (depending on model) Coil Outer Diameter: 700 – 1300 mm Coil Inner Diameter: 300 – 630 mm / 480 – 600 mm (model dependent) ENGINEERING FEATURES Bsdpfjyzd I Ijx Ahmodh Mechanical expansion mandrel system Motor-driven rotation system Frequency inverter controlled speed adjustment Belt and pulley transmission system Brake-controlled mandrel system Right-to-left / left-to-right operation capability OPTIONAL FEATURES Pneumatic upper arm (snubber arm) system Coil hold-down system Custom mandrel configurations Integration with press feeding systems OPERATIONAL ADVANTAGES Compact and space-saving design Cost-effective solution for light and medium coils Easy installation and operation Low maintenance requirements Flexible configuration options APPLICATION AREAS Press feeding lines Stamping and metal forming Sheet metal processing Roll forming lines General industrial applications REFERENCE & EXPERIENCE Images included in this listing show reference installations of similar mechanical decoilers successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request.

Year of construction: 2025, condition: new, Wash, mill and press fruits, pasteurizing the juice and filling in Bag in Box Capacity up to 750l/h incl. mounted hydraulic bin tipper washing-mill Kreuzmayr KWEM1000 single belt press Kreuzmayr KEB500 pasteurizer Kreuzmayr PA750 oil Bag in Box filler Kreuzmayr KBF900, with mounted 6-head bottle filler Bdsdpfxj Uv Ite Ahmsh Juice pump, juice sieve, 2 pieces juice tank á 220 liter stainless steel frame with two axes wheeles 195/50/10 canvas cover with gas pressure spring for both sideboard, backboard able to open 4 pieces shoring for a horizontal arrangement of the plant High pressure cleaner, air compressor and complete pipe installation fix mounted

Condition: excellent (used), Manufacture: Aerofoil Type: 30J 26° JAR Blade diameter: 750mm Bsdsk Nli Hjpfx Ahmjdh 2 stage Air transport: approx. 5000 m3/h++ 110V 5.5A, 0.48hp, direct current (DC)

Year of construction: 2025, condition: new, consisting of: - Trailer - Washing Elevator KWEM 1000 - Apple Belt Press KEB 400 Bodpfscl Tq Usx Ahmjdh - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 500 - Bag in Box Filler KBF 2000 for mobile trailer - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . .

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, DESCRIPTION Beck-Packautomaten Series Packer S1750 X Fully automatic film packaging machine for four-side product sealing Fully automated, conveyor belt feeding with light barrier control Operation: The Beck series packer operates fully automatically with photoelectric product detection. Bedpfxjy H Dyno Ahmsdh The goods to be packaged are conveyed on a transport belt into the cross sealing unit and are then sealed on all four sides in a step-by-step process. The film rolls are positioned above and below the transport belt. For the production of tight shrink packs, the packaging machine can be expanded into a complete film packaging line by integrating the proven, energy-saving Beck heat shrink tunnel. Technical data: Standard operator side: right Sealing bar width: 550 mm Sealing bar closure: servo-driven Sealing system: permanently heated Pass-through height: 100 mm Infeed belt width: 140 mm Outfeed belt width: 140 mm Product width: 150–500 mm Product length: 30 mm up to unlimited, with closure of sealing bar gap Speed control: infinitely variable with frequency converter from 19–40 m/min Capacity: up to 50 cycles/min* Longitudinal sealing: continuous operation Film: flat film, printed or plain, from 11 to 80 micron Film width: max. 650 mm Film roll diameter: max. 300 mm Machine length: 2,550 mm Machine width: 1,600 mm Machine height: approx. 1,700 mm Working height: 800–950 mm Electrical connection: 3N400V 50 Hz Connected load: approx. 3 kW Paint finish: cream white / green * Machine output depends on equipment, product, and film. Description: • Machine frame in steel sandwich construction • The sealing system is permanently heated and maintenance-free • With freely-programmable Siemens S7 PLC • Siemens operator panel: digital control unit OP7 • Easy format changeover via central width and height adjustment • Format data storage with simple menu and operator guidance • Inline product feeding, product indexing via light barrier, optionally horizontal or vertical scanning • Hold-down plates at the cross sealer with product scanning • Longitudinal sealing electrically actuated • Film unwind device integrated in the machine frame, without plug-in shaft (allows easy and quick film roll change) • Film rewind device with film break-control, high roll capacity • Film feed motor-driven, including end-of-film detection • Machine hood for optimum accessibility, all safety windows equipped with safety switches • Beck packaging systems meet CE conformity requirements Additional equipment: - Rotary encoder, swing-away side sealing system, needle perforation unit for the top film

Condition: new, Year of construction: 2026, Container 150 l thermally insulated with 13.5 kW /400 V heating with automatic temperature switch-off, rack, bag-in-box filling device with bag holder * simple, safe, optimum price-performance ratio * no temperature fluctuations * absolutely gentle heating due to large heating surface of 0.4 m² * with thermostat: switches off when temperature is reached * Height-adjustable stainless steel frame - the container runs completely empty "Free time" during the heating time approx. 40 min. for 150 ltr. Hourly output approx. 150 ltr. also available with 18 kW /400 V heating - hourly output 180 ltr. 2-digit bottle filling available Bdedpfx Aot U H Nrjhmoh You do not have a 400V connection? Container pasteurizer is also available with gas condensing boiler. ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use