Used Kulicke & Soffa Wedge Bonder for sale (464)

Condition: used, The K&S 8030 was a wire bonder, likely a specialized or less common variant. Based on the architecture of the 8000-series bonders, the typical specifications were approximately: Parameter Typical 8000-Series Capability Bonding method Thermosonic wire bonding Wire types Gold (Au), Aluminum (Al) depending on configuration Bond type Ball bonding or wedge bonding (model-dependent) Positioning Vision-assisted X-Y motion control Ledpozdgl Hsfx Ag Tsrn Bonding area Typically 50–100 mm class work envelope Applications IC packaging, hybrids, chip-on-board, microelectronics Automation Programmable automatic bonding sequences

Year of construction: 2019, condition: used, Operational machine. Ask for additional information. Ledpfx Asy R U H Hog Torn Second unit as well, vintage 2021.

Year of construction: 2004, condition: excellent (used), Known K&S 8020 Specifications Specification Value Bonding type Automatic thermosonic ball bonder Wire material Gold wire (Au) Bond head Voice-coil direct-drive bond head Ultrasonic transducer 120 kHz unibody transducer with adaptive USG Vision system 20/20 vision system Camera Sony XC-75 CCD Bond pitch capability Sub-70 µm pitch kit available Bond area 2.0 × 2.3 in (≈ 50.8 × 58.4 mm) Optics Universal optics with increased depth of field Illumination LED Workholder 250-series heated manual workholder Power 208 V, 50/60 Hz Control Software-controlled automatic bonding programs Typical Process Capability The 8020 was developed to provide: Fine-pitch bonding Long, low wire loops Improved process control High throughput for leadframe and laminate packages Automated vision alignment and pattern recognition These capabilities were key selling points of the 8000 family. Applications Plastic IC packages SOIC, QFP, TSOP Memory devices ASICs Hybrid microelectronics Chip-on-board assemblies Physical Characteristics Unfortunately, a complete factory datasheet with dimensions, weight, XY-table resolution, bond-force range, and supported wire diameters is not readily available in public archives. Most of the available information comes from listings of used equipment and K&S annual reports. If you need details such as: Bond force range (grams) Wire diameter range (e.g., 0.7–2.0 mil) Ledpfxozdgm Ds Ag Torn XY positioning resolution Air requirements Maintenance manual Error codes or calibration procedures

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled New bearings for pressure rollers and motor new tips Lodpfx Asqvz U Eog Tsrn opening width: 430 mm

Year of construction: 2014, condition: used, Used machinery. 3 of total available. Lodoy R U Spjpfx Ag Tsrn

Condition: used, Year of construction: 2011, Total of 3 machines available. Spec as per picture. Lsdpfoy R U Ahjx Ag Tjrn Ask for an offer.

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Lrsdpfxsui Ifcj Ag Tsn

Condition: used, 3-jaw wedge bar power chuck FORKARDT type HGF 160-45-3 HI GRIP No. 109452 Diameter: 165 mm Internal diameter: 46 mm Cylindrical centering ring mounting: Ø 140 mm Max speed: 5,500 rpm - Wedge bar chuck with centrally adjustable clamping jaws - 1 set of stepped jaws, reversible for use as hard or soft jaws (can be reversed by 180°) Ledpfx Ajy Ehypjg Tsrn - 3 mounting holes Ø 11 mm, bolt circle 105 mm Weight: 9.3 kg Very good, as-new condition

Condition: excellent (used), Taper shank chuck (28319) Diameter 290 mm Cylindrical shank 78 mm Lrjdpeiuvumefx Ag Ton Taper 6 mm Weight 54 kg

Condition: excellent (used), functionality: fully functional, Möhringer splitting wedge with large opening and pressure roller. Can also be adjusted across the center. Lrjdov Tbxpepfx Ag Ton

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 290 mm -Recess inlet: Ø 268 mm -Bolt circle: Ø 168 mm -Mounting hole: Ø 21/31 mm Lrjdsb E N Txjpfx Ag Ton -Mounting hole spacing: 148 mm -Through hole: Ø 70 mm -Weight: 43.5 kg

Condition: used, 2 sets of wedge shoes 1x PKA 3 Size 200 x 200mm 1x PKA 4 Size 200 x 250mm Ljdjyt Egbopfx Ag Tern 4 pieces each, only sold as a set

Condition: used, 3-jaw wedge-bar lathe chuck FORKARDT TYPE F+160 No. 1659 181 Identical to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: short taper DIN 55022, size 6 1 set of chuck jaws consisting of base jaws and hardened step jaws for turning 1 set of chuck jaws consisting of base jaws and soft step jaws for turning Lsdpfxof Axpre Ag Tsrn - central adjustment Weight: 11 kg Good condition

Year of construction: 2012, condition: ready for operation (used), There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg. Lsdpfx Agotncl Ds Tern

Year of construction: 2000, condition: good (used), 3-jaw collet chuck Manufacturer: SMW, Type: HG 200, year of manufacture approx. 2000 Bore diameter: 50 mm Flange mounting diameter: 170 mm Without jaws, with chuck key. Chuck in good condition. Lodpfx Aed Sym Aeg Torn

Condition: good (used), Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg Lodpfx Ajb A R Tneg Tsrn

Condition: good (used), Steel holder, clamping plate with T-slot, wedge holder Ljdpfxjwcxfqs Ag Tsrn -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm -Weight: 12.3 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Hole size: Ø 216 mm -Recess recording: mm -Bolt circle: mm -Through hole: 50 mm Lsdedqck Hopfx Ag Torn -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm -Number: 2x wedge tool available Ljdpfovvafyjx Ag Tern -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic Lredpfx Agevvagks Tjn -Intermediate dimension: 65 mm -Insertion depth: 40 mm -Dimensions: 565/154/H105 mm -Weight: 20.1 kg

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks Lrodjdnaz Nspfx Ag Tjn -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 195 mm -Interchangeable jaws -Weight: 12 kg Ljdpsb A Ihvofx Ag Torn

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Lrjdpfxsb A Rqle Ag Tjn -Mouth size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Bolt circle: 172 mm -Weight: 90 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm Lsdpfsb A Ranjx Ag Torn -Interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg

Condition: used, load capacity 7,700 kg can be screwed-on with insulation plate B4 Lrsdpfx Ajfii Dpog Tjn construction height 63 mm in middle position adjustment range +4 / -6 mm dimensions 200 x 200 mm internal thread M20 weight 9.5 kg - new - unused - 6 units on stock price per unit