Used Kupfermühle K 133 / K 103 for sale (36,878)

Condition: like new (used), functionality: fully functional, Knife shaft Z4, in like-new condition. Planer shaft Z4. Pgedpfx Aoyur N Eoirst 1 unit for the bottom. 1 unit for the top. Originated from K133, and we can also shorten it by 300 mm for K103. 40% cheaper than a new one from the manufacturer.

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Pgjdpfx Aisz Eblaerot Dimensions of the system Length 10,840 mm Width 4,200 mm Height 3,840 mm The system is equipped with the following additional units: Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.

Condition: ready for operation (used), KUPFERMÜHLE – 2-sided Planer K43 Working width max. 420 mm Planing height, 2-sided max. 300 mm Feed rate 15 - 90 m/min Chip removal, lower cutterhead 15 mm Chip removal, upper cutterhead 20 mm Drive motor, lower shaft 15.0 kW Drive motor, upper shaft 22.0 kW Drive motor, scoring saw, top 7.5 kW Pgedpozmmrdofx Airet Feed motor 7.5 kW Height adjustment 3.0 kW Total electrical power 55 kW Planer heads, aluminum, each with 8 knives D 200 mm 2 pcs Jointing device, bottom and top Overall length 2960 mm Overall width 1630 mm Table height, constant 800 mm Net weight 5300 kg Year of manufacture 1983 Last maintenance by the manufacturer 2024 Condition good This planer was originally purchased new in 1984 as a 4-sided machine. However, the vertical milling units have been removed and are no longer present. OPTION: Machine with 2 vertical milling units available at an additional cost. Machine is located in a soundproof cabin. L 3.8 x W 2.4 x H 2.6 m

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH30 Four-sided planing machine with additional unit: horizontal work spindle Psdpsx Ehfcofx Airogt and extraction unit 4-sided universal planing machine KUPFERMÜHLE Electrical system: 400 volts / 50 Hz / 58.5 kW Paint finish: original Reseda green RAL 6011 Motor power and arrangement (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle, bottom: 11.0 / Feed: 7.5 / Power: 3.0 Feed speed min/max: 5 – 30 m/min Work spindles: 5 pieces Discharge/extraction port: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max, 2-sided: 15 mm / 300 mm Working height min/max, 4-sided: 15 mm / 180 mm (OPTION 250 or 300 mm) Key features: Constant table height Guide rail on the RIGHT Planer heads for quick change Jointing device at the bottom and top Table plates slotted for sound insulation and are replaceable Extraction unit with 2 driven rollers at the top and double-sided guided upper part Height adjustment synchronized with the base machine Machine in repaired and tested condition with functional guarantee Additional options: New paint finish Repainting Overhaul etc.

Condition: excellent (used), CATALOG NUMBER: 7503 TECHNICAL DATA: - max planing width 610mm - max planing height (two-sided) 200mm - max planing height (four-sided) 100mm Top: - 2 rubber feed rollers - 2 toothed feed rollers - metal feed roller - geared feed roller - pawls - pressure roller - 2 geared feed rollers - pressure roller - planing shaft 610mm, 4-knife, 7.5kW - pressure roller - smooth, metal feed roller - pressure roller - profiling shaft 7.5kW - pressure roller - rubber feed roller Bottom: - planing shaft, axis 35mm, axis length 130mm, 2.2kW - 2 guide strips Podpezr Ixcjfx Airsgt - feed table - smooth feed roller - planing shaft 610mm, 4-knife (2 knives installed), 7.5kW - 2 smooth feed rollers - split, metal slip roller - side pressure roller Rear: - side spindles + 2 pressure rollers - 1) vertical right 95mm, 4kW - 2) vertical left 95mm, 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - adjustable rollers in the lower table - electric thickness setting - 6 feed speeds 7/9/11.5/14/18/23 m/min - feed motor 3.1kW - dust extraction port diameters 3x120, 3x160mm - dimensions (L/W/H) 3150x1900x1600mm - weight approx. 3500kg ADVANTAGES: – best wide-belt planer for wet and dry wood – ideal for processing timber, flooring, etc. – additional profiling shaft and planing shaft (undercutter) – 4 horizontal planing shafts + 2 vertical spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations)

Condition: excellent (used), For sale: Constantin Hang 103 LOK die-cutting machine, a product from a renowned German manufacturer. This device is designed for the precise die-cutting of paper, cardboard, leather, felt, rubber, and other soft materials. The machine is equipped with an electric drive, foot pedal control, and a robust work table with a material guide, ensuring comfortable and precise operation. Thanks to its robust construction, the device is characterized by high durability and reliability. Pedpfx Aioziqq Nerjgt Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 103 LOK Machine number (Serial no.): 9578 Type: die-cutting machine Drive: electric Control: foot pedal Motor: Georgii KRD 328 Power supply: 220/380 V Motor power: 240 W Frequency: 50 Hz Motor speed: 680 rpm Work table with guide Robust steel construction Condition: Used. Functional. Shows normal signs of wear and tear due to age and use. Visual condition consistent with the photos.

Condition: excellent (used), CATALOGUE NUMBER 7679 TECHNICAL DATA - max. planing width 610mm - max. planing height (two-sided) 200mm - electric adjustment of the table, up/down - max. planing height (four-sided) 100mm – Top: - toothed infeed roller - ejectors - pressure roller - 2 toothed pull rollers - pressure roller - planing roller 610mm, 4-knife, 7.5kW - pressure roller - smooth, outfeed pull roller – Bottom: - guide rail - toothed pull roller Pjdpfxezw Dins Airogt - planing roller 610mm, 4-knife, 5.5kW - 2 smooth pull rollers – Rear: - 2 side spindles + pressure roller 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual adjustment of planing width - 6 feed speed settings 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions (L/W/H) 2500x1800x600mm - weight approximately 3000kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – 2 horizontal planing rollers + 2 vertical spindles – used planer, very good condition Net price: 56900 PLN Net price: 13233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2006, operating hours: 5,000 h, functionality: unexamined, machine/vehicle number: 61007689, overall weight: 5,400 kg, input frequency: 50 Hz, input voltage: 400 V, This KRAUSS MAFFEI KM-100-380CX injection molding machine, manufactured in 2006 with approximately 4,700 operating hours (as of 03/2025), will be auctioned off in our online auction "Liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories – STEP 3". You can find this and many other items from the fields of injection molding & plastics technology, warehouse & conveyor technology, and workshop equipment on our RESTLOS auction platform. Machine details: including all peripherals installed on the machine Year of manufacture: 2006 International size: 380 CX/100 Own weight: 5,400 kg Pgjdez Erz Sjpfx Airjt Reported operating hours as of March 10, 2025: 4,704. The machine has already been disconnected from the power supply and can no longer be switched on; all fluids are still in the machine, as stated. as pictured basically without any other items basically, functionality is untested.

Year of construction: 1989, condition: used, - Type KM 42 Arrangement of planing rollers: bottom/top/saw roller Working height: 800 mm Planing width: max. 420 mm Planing height: max. 250 mm Bore of the circular saw blade: 70 mm with 2 keyways, 20.5 x 4.25 mm Diameter of the planing spindle: 2 x 60 mm Adjustment of the working width: manual Adjustment of the working height: electric Feed speeds: 7-42 m/min, continuously adjustable Feed motor: 5.5 kW Number of driven rollers in the table: 3 Number of feed rollers on top: 6 Cables have been cut. Pedpfx Asgqrtioirogt Description: see original document, attached.

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Pgedpfjzc I Igex Airot Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Pgsdpfxowwvwyj Airjt

Condition: excellent (used), Year of construction: 2011, Model Amada HFE M2 103t x 3110 3m, 4 axis Press Brake Year 2011 Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Pgedeyym Hwepfx Airst Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), functionality: fully functional, Saw bushings DK14 Saw bushings DK16 Saw bushing DK17 Pedpfxjxq R Rxo Airegt and other accessories

Condition: good (used), Year of construction: 2015, functionality: fully functional, TS07 Control System · 7” LCD Touch Screen graphical display Edge trimming unit RT02, 1 set of diameter trimming cutters, H=65 mm for edge trimming unit RT02 Gluing unit SP03 End trimming unit IT03 Fine trimming unit RF02 Edge rounding unit AR02 Edge scraper RB02 Glue scraper unit RC02 Cleaning unit LPT02 Anti-adhesive unit ADZ02 AX-1, NC axis on the stop Pgsdpfxjzuavls Airst AX-1, motorized, controlled pressure beam AX-1, NC axis for pressure rollers for the gluing unit AX-4, NC axis for the fine trimming unit AX-2 NC axis on the edge rounding unit AR02 AX-4 NC axis on the edge scraper RB02

Condition: used, mileage: 468,800 km, power: 206 kW (280.08 HP), first registration: 06/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, Equipment: ABS, crane, MAN LE 18.280 | Flatbed | HIAB 133 K PRO/HIPRO Crane | 18 t | 4x2 Vehicle Description: Pgedpfxjx Hb Nmo Airot For sale is a MAN LE 18.280 equipped with a flatbed and a powerful HIAB-HIPRO crane. This is a robust piece of equipment, ideal for construction sites, timber handling, steel, containers, and more. The vehicle is mechanically sound, the crane is fully functional, and on-site demonstration is possible. Vehicle Data: • First registration: 06/2003 • Mileage: approx. 468,800 km • Engine power: 206 kW / 280 hp • Displacement: 6,871 cm³ • Fuel type: Diesel • Transmission: Manual • Drive: 4x2 • Emission class: Euro 3 • Emissions sticker: None (green not possible) • Gross vehicle weight: 18,000 kg • Unladen weight: approx. 9,320 kg • Payload: approx. 8.7 t • Cab: Day cab Crane / Superstructure - HIAB 133 K PRO/HIPRO: • Multiple extensions (telescopic boom) • Outriggers at the sides and rear • Crane operational and can be demonstrated • Flatbed with drop sides Equipment: • ABS • No EBS • No ESP • Cloth seats • Dual passenger bench • Radio pre-installation • 24-Volt system • Durable and straightforward technology For further information, please feel free to contact us.

Condition: used, mileage: 468,800 km, power: 206 kW (280.08 HP), first registration: 06/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, Equipment: ABS, crane, MAN LE 18.280 | Flatbed | HIAB 133 K PRO/HIPRO Crane | 18 t | 4x2 Vehicle Description: For sale is a MAN LE 18.280 equipped with a flatbed and a powerful HIAB-HIPRO crane. This is a robust piece of equipment, ideal for construction sites, timber handling, steel, containers, and more. The vehicle is mechanically sound, the crane is fully functional, and on-site demonstration is possible. Vehicle Data: • First registration: 06/2003 • Mileage: approx. 468,800 km • Engine power: 206 kW / 280 hp • Displacement: 6,871 cm³ • Fuel type: Diesel • Transmission: Manual • Drive: 4x2 • Emission class: Euro 3 • Emissions sticker: None (green not possible) Pgedpfox Hb Rkex Airet • Gross vehicle weight: 18,000 kg • Unladen weight: approx. 9,320 kg • Payload: approx. 8.7 t • Cab: Day cab Crane / Superstructure - HIAB 133 K PRO/HIPRO: • Multiple extensions (telescopic boom) • Outriggers at the sides and rear • Crane operational and can be demonstrated • Flatbed with drop sides Equipment: • ABS • No EBS • No ESP • Cloth seats • Dual passenger bench • Radio pre-installation • 24-Volt system • Durable and straightforward technology For further information, please feel free to contact us.

Condition: used, Year of construction: 2022, total height: 1,500 mm, total length: 5,500 mm, total width: 1,100 mm, Colour: White Weight: 1.650 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 1000054777 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Fine milling unit - └ 5th unit type: Corner rounding unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 5 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 50 - Min. panel length [mm]: 150 - Max. panel length [mm]: 3200 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Type of glue: PUR/EVA - Voltage [V]: 400 - Current consumption [A]: 22 - Power [kW]: 11.9 - Transport dimensions: 5500mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Pgedpfozx Aghsx Airot Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Spraying device Grinding unit with AirForce System, hot air edge gluing unit without joint Edging unit Trimming and finishing unit Spraying device Radius milling unit Edge scraper unit Pjdpfxjz Aqyds Airogt Glue scraper unit Spraying device Brush unit Weight approx. 1650 kg. Only 62,853 meters of edge material processed 2 additional glue tanks for PUR and EVA

Year of construction: 2000, condition: ready for operation (used), Output: 14,000 bottles/h, number of filling vents: 55, output: 14.000 bottles/h, number of vents: 55, running direction: left to right, with Labelling Machine KRONES UNIVERSELLA 723. Pedpfjhitrqox Airsgt

Condition: used, Year of construction: 1989, machine/vehicle number: 890046, Working Temp Max 120C° Psdpoz Ad Hdjfx Airegt Max Pressure 8 Bar Volume 17L

Condition: used, Saw unit Multi-blade saw Podpoxq S Sdjfx Airjgt Working width: 620 mm Cutting height: 100 mm Saw blade, max.: D 350 mm Motor power: we will provide this according to your requirements.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 454106, Technical data: Min. / max. material thickness 3 - 25.0 mm Max. bevel length, steel 400N/mm² 10 mm Psdpfx Ajfg Uvdsirogt Max. bevel length, steel 600N/mm² 8 mm Max. bevel length, steel 800N/mm² 5 mm Working speed, approx. 2.5 m/min Stroke rate 400 1/min Drive 400 V / 2000 Watt Space requirement, approx. W 550 x D 200 x H 300 mm Weight, approx. 13 kg

Condition: excellent (used), Macsa id K series CO2 laser coding and marking equipment. Manufacturer: Macsa ID Type: SPA K-1030 Power supply: 125V/230V; 50/60 Hz; (1 phase+N) 660VA Marking head: KS2-1000-10.2 μm, CO2 sealed laser tube, RF technology, 10.2 microns Working distance: 85-400 mm Dimensions: 235x193x656 mm Weight: 40 kg Pgedpfexf Dmvjx Airot IP54 Macsa id TSL-Plus multifunction touch panel Manufacturer: Macsa id Type: TOUCH SCREEN 10.1-M_ICON-2

Condition: good (used), machine/vehicle number: 30621, Ösmaschine Hang 103 LOK, machine number 709048, in good condition, immediately available Podpfx Aijrmlyrorogt Ösmaschine Hang 103 LOK, machine number 180887813, in good condition, immediately available If you are interested, we are happy to inform you about additional machines at our facility. You are welcome to inspect the machine at our premises by appointment.

Condition: used, Automatische Ösmaschine / Automatic Eyeletting machine Hang 103 LOK Serial-No. 24707 Für kleine bis mittlere Serien-Auflagen / For small to medium series-batches Arbeitstiefe / Working depth 130 mm Pjdsv D N H Nepfx Airjgt Stückzähler / Counter Auslösung durch elektrischen Fußschalter / Release via foot switch Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test