Used Kw Energie Smartblock 50 for sale (63,154)

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Nodpfx Aoxc Ni Rei Tewn

Condition: used, HDG Compact C49R – 15–50 kW wood chip boiler Used German biomass boiler for central heating in homes, agricultural buildings and smaller commercial premises. Data verified from the original data plate: - Heat output: 15–50 kW - Boiler water capacity: 173 litres - Operating pressure: 3 bar - Maximum supply temperature: 95 degrees C - Electrical connection: 400 V / 50 Hz, 16 A - Electrical rating: 1.8 kW The electrical rating is separate from the delivered heating output. Please confirm the exact scope of delivery for the boiler, feeder and extraction system, including ignition, cleaning and control equipment. Nedpfx Aswahhvsi Tswn In stock in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer. A wide range of biomass boilers, pumps, buffer tanks, feeders and heating accessories is also available.

Condition: reconditioned (used), functionality: fully functional, Milling motor dimter Nodpfem Sgvzsx Ai Town for finger joint milling machine HK200 and HK400 50 kW

Condition: excellent (used), Year of construction: 1988, For sale: an industrial vibratory polishing machine from the renowned SPALECK brand (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. This robust machine was manufactured in 1988 and is designed for professional finishing of parts. The machine is ideal for: • Polishing surfaces Nwodpfxoz Slaks Ai Ton • Removing burrs after machining • Rounding edges • Cleaning and preparing surfaces for painting or electroplating It works with various types of abrasive media – ceramic, plastic, or steel – depending on the type of parts being processed. Technical specifications: • Model: VAT-240 • Year of manufacture: 1988 • Maximum load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Factory serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The unit is complete, in good technical condition, and ready to operate after connection. It features a robust construction, a parts outlet with a rubber cover, and a convenient abrasive media replacement system. SPALECK is a German brand known for producing reliable vibratory finishing machines, which are highly valued in facilities worldwide.

Condition: excellent (used), Hertz energy-saving boiler 50 kw Nsdpjq I Nfhefx Ai Town

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Nodez Tf D Rjpfx Ai Tswn Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: repair required (used), Mill for recycling waste and plastics. Manufacturer: ALPINE AUGSBURG Type: RO 63/50 Motor power: 50 kW Feed hopper dimensions: 400 x 500 mm Njdpow E Nw Nsfx Ai Tswn Included: 16 interchangeable screens with mesh sizes from 1 to 50 mm Machine dimensions: 3000 x 2000 mm Height with conveyor: 4200 mm Weight: 7000 kg Technical condition: used machine, no electrical installation.

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m Nwodpjz Slq Nofx Ai Tsn • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. The listed price is for 1 piece.

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. Nwedpfez Sl Etox Ai Ten The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Nwjdpfsibwarjx Ai Ten Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit!

Year of construction: 2024, condition: new, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 44.50 kW maximum heat output: 50.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 5060 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 330 kg Gross weight: 340 kg Furnace lining: 40 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Nsdoixup Aopfx Ai Tswn Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 1290mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 930mm x Height: 680mm Upper door dimensions (sheet 3 and 4mm): Width: 390mm x Height: 330mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 315mm x Height: 310mm Center & Bottom Loading Port Dimensions: Width: 315mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 450mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 5060 m3 / h Safety: CE mark + protective net

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts Nwedpfx Aiezf Adge Tsn If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: new, Features • Deep-cycle lithium-ion battery from the automotive sector • Enhanced EMS with touchscreen control • GSM remote monitoring • DC isolator for the entire system with pre-charging function • Automatic bypass for the entire system • Conversion from single-phase to three-phase General Description Off Grid MX is a universal battery energy storage system (BESS) that is ideally suited for a range of applications and provides reliable energy in a cost-effective and environmentally friendly manner. The energy stored in the device is electronically converted into AC power. Power can be drawn from connection to an external grid, a diesel generator, or a solar PV or wind power system. The energy is automatically drawn from one or more of these energy sources to find the most efficient, low-maintenance, and environmentally friendly solution. Remote monitoring and maintenance can be performed in real-time from anywhere in the world. Njdpfx Aie Adlpyj Town Output Specifications Output power (continuous) kVA 30 Peak output power (5s) kW 60 Voltage V 400/230 Frequency Hz 50 Phases 3 Battery Specifications Battery (Type) Li-Ion NMC Battery nominal voltage V 55.5 Battery lifespan to 80% DoD cycles 3000 Battery nominal capacity (size) kWh 50 Usable energy (@80% DoD) kWh 40 Input Specifications Maximum input power Three-phase 400V A 63 Maximum input power Single-phase 230V A 63 System pass-through capacity A 63 Technical Data Length (L) mm 1600 Width (W) mm 1020 Height (H) mm 1708 Weight kg

Year of construction: 2001, condition: used, functionality: fully functional, SECOND-HAND H.F. GENERATOR ELETTRONICA CAVALLO MOD. GAF 50KW - CE RULES Nwsdpfex Rrlgsx Ai Ton - Double exit - Year 2001

Condition: used, functionality: fully functional, For sale: Motan METRO HES 50 vacuum conveyor for granules, designed for transporting plastic granules, including feeding injection molding machines. The unit is equipped with a stainless steel tank, an integrated suction unit, and an electronic control panel with a digital display. Technical data according to the nameplate: Manufacturer: motan GmbH Model: METRO HES 50 Power supply: 230 V, single-phase, N and PE Frequency: 50/60 Hz Power consumption: 1.1 kW – 1100 W Current draw: 4.8 A Control voltage: 24 V DC / 230 V AC Protection: 10 A, time-delay Country of manufacture: Germany CE marking Condition: used, visible signs of wear. Nwjdpfx Aie Afy Rgj Ton The set includes the unit with the control panel, cables, and connectors as shown in the pictures. The scope of sale corresponds to the pictures.

Year of construction: 2012, operating hours: 150 h, condition: used, functionality: fully functional, MTU 20V4000 P63 – 2,500 kW / 3,200 kVA Diesel Generator Set – 6.3 kV – 50 Hz For sale: One complete MTU 20V4000 P63 Emergency Diesel Generator Set, manufactured in 2012, with only approximately 135 operating hours and in excellent, near-new visual condition. The unit consists of an MTU 20-cylinder V-type diesel engine coupled to an LDW (Lloyd Dynamowerke) synchronous generator, mounted on a common base frame. Technical specifications Manufacturer: MTU Friedrichshafen GmbH Engine type: MTU 20V4000 P63 Year of manufacture: 2012 Serial number: 528101826 MTU order number: 747891 Operating hours: Approx. 135 Rated genset output: 2,500 kW Generator rating: 3,200 kVA Rated speed: 1,500 rpm Frequency: 50 Hz Voltage: 6,300 V Rated current: 293 A Power factor: 0.80 Generator manufacturer: LDW – Lloyd Dynamowerke, Germany Generator type: S5E710M50-4SF Protection class: IP23 Insulation class: F Dimensions (L × W × H): 7,600 × 2,960 × 3,410 mm Dry weight: Approx. 33,100 kg Engine and operating history The MTU 20V4000 P63 is a 95.5-litre, 20-cylinder diesel engine with a continuous engine power rating of 2,600 kW at 1,500 rpm, equipped with two turbochargers and an intercooler. Originally installed as an emergency power supply, the generator set has accumulated only approximately 135 operating hours and remains in exceptionally good visual condition. Until 2017, the unit was maintained according to the power plant's scheduled maintenance programme. Following the shutdown of the relevant section of the power plant, the unit continued to be started periodically but was no longer maintained according to the previous maintenance schedule. The unit was subsequently preserved for storage before removal from the site. Nwsdpfx As Adtk Sei Tsn Documentation and inspection Extensive original MTU technical documentation is available, including operating and maintenance manuals, technical specifications, drawings and generator documentation.

Condition: good (used), functionality: fully functional, Year of construction: 2003, Do you have a problem with the resonator on your TRUMPF laser cutting machine with 5 kW output? Then you’ve come to the right place! TruFlow 5000 / 5 kW resonator for TRUMPF laser cutting machines (L 3050 / L 4050 / L 6050 / TruLaser 5030 / 5040 / 5060) Nwsdoxzivbopfx Ai Ton Power measurement during machine dismantling: 5,462 W (end of October 2025) (The machine still delivered 4,930 watts at the cutting head. The resonator is in very good condition in terms of output.) Leak test: 0.02 hPa If you would like to replace your resonator or if you have issues with your turbine, feel free to contact us. All parts are available at short notice.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. Nsdpfxjz Hngmj Ai Town This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Nodpfx Aoxxa Ucei Tjwn

Condition: new, Year of construction: 2026, Josan generator sets – proven, robust quality! We offer leasing and financing options. Feel free to ask! ‼️5-year warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and more. Available for pickup in Heilbronn. We also offer affordable shipping. Just ask! Up to 1000 kW possible. All models feature diesel engines with electric starters and 56 kW at 1500 RPM. Feel free to compare prices and inquire about the types of engines offered at what price. Check what was manufactured in Germany or Europe. With us, you can also choose a model with a Cummins engine (at an additional cost). Top quality at a great price! We are here for you in Heilbronn. German company, German laws, German service – that's what you get with us! The price includes everything – all-inclusive! Our electricians, who hold German master craftsman certificates, will quickly assist you without any complications, should the need arise. We also rent out generator sets, so you won't experience any downtime. Discounts are available for orders of 10 units or more. Simply contact us, and we will call you back. Nwjdpfsp E Egaex Ai Ten Emergency generator set 320 kVA / 250 kW: ➡️Proven engine ➡️Proven 6-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400 V, 220/230 V, 50 Hz ➡️AVR regulation ➡️Dimensions approx. 3700mm x 1300 x 1910mm ➡️Weight approx. 2400 kg ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With battery charger ➡️With ATS Net price: €22,900.00 Emergency generator set 150 kVA / 120 kW: ➡️380/400 volts, 220/230 volts, 50 Hz ➡️AVR regulation ➡️Very quiet, only approx. 65 dB ➡️Dimensions approx. 2800 x 1100 x 1500mm ➡️Weight 1390 kg ➡️Proven 6-cylinder diesel engine with 132 kW / 1500 rpm. ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With ATS ➡️With battery charger Net price: €10,900.00 Emergency generator set 63 kVA / 50 kW: ➡️380/400V, 220/230V, 50 Hz ➡️Very quiet, only approx. 65 dB ➡️Proven 4-cylinder diesel engine with 56 kW, 1500 RPM ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Compliant with all EU standards (including 220 volts as used in Germany) ➡️With AVR regulation ➡️With battery charger ➡️With ATS Net price: €6,900.00 Emergency generator set 50 kVA / 40 kW: ➡️Proven engine ➡️Proven 4-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 2250 x 960 x 1270 mm ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulation ➡️With battery charger Net price: €6,900.00 Emergency generator set 25 kVA / 20 kW: ➡️25 kVA / 20 kW ➡️Proven engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 1800 × 900 × 1000 mm ➡️Weight approx. 650 kg ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulat

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,800 mm, overall weight: 1,300 kg, Equipment: CE marking, saw blade guard, Format 4 Format Panel Saw Kappa 550 Power Drive - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment 202 mm - Positioning control for swivel adjustment 90°–45° - Rip fence 3200 mm, 2 fence jaws - Extension table 1250 x 650 mm - Sliding table „X-Roll“, sliding table length 3700 mm, fence shoe - Cutting width 1250 mm - Upper guard, adjustable for suction and height, can be swiveled away from the work area (not shown in the pictures, but present) - Saw blade diameter 250–550 mm, maximum cutting height 202 mm - Position-controlled height adjustment & angle adjustment 0°–46° Nwsdpfx Aoy Hk Swsi Tsn - Panel saw with table extension up to 1200 mm behind the saw blade, steel powder-coated - Weight: 1300 kg Price ex works Transportation possible for an extra charge!

Condition: good (used), Year of construction: 2003, functionality: fully functional, Brand: Kallfass Model: KW 5050 Universal Year: 2003 welding frame dimensions: 500 x 500 mm Nwodpfx Aioha Unyj Ten maximum film roll width: 650 mm Working height: 840 - 950 mm Passage height: 100 - 200 mm Power supply: 230 V three-phase current Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Enclosure dimensions: 1550x1400x950 mm

Year of construction: 2011, condition: used, THERMATOOL CFI 250 Solid State HF Welder 250 kW High frequency tube welding machine This THERMATOOL CFI 250 is a Solid State High Frequency Welder designed for the production of steel tubes and profiles using high-frequency welding technology. With an output power of 250 kW and a 400 kHz welding frequency, it delivers reliable, efficient, and high-quality welding performance for tube mill production lines. Technical Specifications · Manufacturer: THERMATOOL · Model: CFI 250 · Year: 2011 · Output Power: 250 kW · Welding frequency: 400 kHz · Input Voltage: 3 × 400 V · Input Current: 578 A Main Features · 250 kW MosFet HF inverter with 5 pairs of modules (5 positive & 5 negative) Nwjdpfx Aszpx Iioi Tsn · AUTOMATCH automatic load matching system · 250Kw DC rectifier with PLC control Siemens S7 · Remote control console · Closed-loop distilled water cooling system Looking for a used THERMATOOL HF welder, 250 kW solid-state welder, or other second-hand tube mill equipment? Explore our extensive range of quality used machinery for the steel tube industry. Input Voltage: 3 × 400 V Input Current: 578 A Welding frequency: 400 kHz Output Power: 250 kW 250Kw MosFet HF Inverter with 5 pairs of modules: 5 positive & 5 negative 250Kw DC rectifier: with PLC control Siemens S7

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker Nwjdpfx Aj Af E Ilsi Ten The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Technical specifications: Type: Semi-automatic machine for producing hardcovers Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Nwjdpfxoz Snp Ss Ai Ten Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos.