Used Lange Maschinenbau B 58 for sale (41,613)

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture: 2021 (Table machine) For stationary profiling of head edges on soft-forming and post-forming workpieces. Also for edge trimming on thick PVC edges with right-angled workpieces and multi-sided gluing. The processing of symmetrical and asymmetrical soft-forming and post-forming profiles is possible after manual profile depth adjustment. The motor feed is performed manually by sensing the workpiece. Basic equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, steplessly adjustable up to 27,000 rpm, standardly equipped with radius cutter R=2. Sensing is performed by a guide ring on the workpiece. - Aggregate guidance on precision linear guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Gedpfx Afokwhapjuskc Workpiece length: min. 110 mm Soft-forming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on the edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1 phase Total connection: 0.8 kW Pneumatic connection: 6 bar Space requirement: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Availability: short-term Location: Solingen

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N Gedpfjzc Agkjx Afuekc - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025 Gksdjynpc Nspfx Afuoc

Condition: good (used), Year of construction: 2019, Edging thickness 0.4-3 mm / 5 mm Jointing unit Gjdpoy El Eijfx Afujkc Glue pot Pressure unit End trimming station Milling station Scraper blade Flat scraper blade Workpiece thickness 8-50 mm Workpiece width min. 75 mm Workpiece length min. 120 mm Total length approx. 2940 mm + magazine plate overhang Exact equipment upon request The data was taken from a technical data sheet; therefore, accuracy cannot be guaranteed.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Gkedpsw I U Drjfx Afuoc Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Year of construction: 2025, condition: new, Length-cutting unit Gkjdpfxszxzdfo Afuoc The machine has a 15 kW electrical connection and can saw logs with diameters up to 85 cm. The saw motor has an 11 kW motor. Dimensions: Overall length: 6.5 m Width: 2 m Height: 3.4 m

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Gjdpfezttnfsx Afuokc Equipment: Base machine Additional cost for radius milling cutter unit with blowing device + extraction system Additional cost for surface milling cutter unit Additional cost for diamond tools, height = 55 mm, for jointing unit EVA/PUR glue tank with drain function instead of standard glue tank Collection table / pipe bridge Pre-carriage Location: Flörsheim Availability: Immediate

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm Gkjdpfxszk Nmrs Afuoc - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Gkodpfxozw D Has Afujc Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Godpozz Rpcofx Afuekc - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Gkedpfxoz Agv Us Afuec - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Gksdsz Agw Espfx Afuec - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Godez Ag Rropfx Afujkc - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts. Gkjdpozwpxzjfx Afujc

Condition: used, Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine No CNC knowledge required, extremely easy to operate Tool holder: Laip Coolant system Automatic tool changer for 10 tools Automatic tool length measurement Data import: DXF Electronic handwheel Light curtain on the operator side Spindle motor: 7.5 kW Gjdpfxezqvbps Afujkc Spindle speed: 200-2000 RPM Touchscreen: 21.5" Factory inspected

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Gjdpfozzp Ttox Afujkc Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer Gedsy Hiyaepfx Afuokc - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Condition: used, Year of construction: 2014, Equipment: Gjdsxrb Rfopfx Afujkc - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 2014, functionality: fully functional, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts - General Information: Direct from manufacturer Manufacturer’s warranty Maintenance included Latest possible software version - General technical data (in mm): Gkedsx Hyhuepfx Afuoc Blank length: 50–600 Blank width: 40–600 Sheet thickness max. (400 N/mm²), tool-dependent: 3.0 Upper beam stroke max.: 500 mm Minimum flange height (reference value, tool-dependent): 5 × s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrics: approx. 2,027 kg Weight of machine elements: approx. 945 kg - Machine-specific data: Motor operated; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine Configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis + separate drive for rotary axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic swivel drive for rotary axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell, front and rear Mobile operating panel: - 18" Touch & More control Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining parts) Curved transport conveyor with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Gjdpfx Afezdumqoujkc

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Gksdpfezbx N Esx Afujc Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling? Godpfx Ajzdb Nmjfujkc  No CNC knowledge is required thanks to a user-friendly interface.  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation.  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability.  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? The MDX center is a robust, clearly structured machine with minimal follow-up costs. An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Condition: excellent (used), Year of construction: 2009, Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Gkedpfx Afjy N Tl Esuec When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 1988, MEM Cobra 2MT Multisaw 2 movable couplers Gkodpfjmv H Dqex Afuoc hydraulically floating saws 2 motors 30kw cutting height 100mm cutting width 900mm 2 hydraulic pumps 15kW and 7.5kW electronic control 4 line lasers High efficiency weight about 8000 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 1,000 mm, rotational speed (max.): 3,000 rpm, disc diameter: 400 mm, MEM Cobra lite edger. In good condition. 2 movable axles 18.5KW. Fixed axle 37KW or 11KW. Several new blades included. Gksdpfx Afex Tzkkouec