Used Langheinz Ice Water System For 70 Liter Per Batch for sale (66,987)

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid hydration during mixing without ice Ledpfx Asivdv Djkyern + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multi-tube stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters/hour - Peak cooling capacity*: 500 liters/hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Connection values: 400 V - 50 Hz - 1 phase - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 25 liters/minute - Dimensions: 1170 x 630 x 770 mm (L x W x H) - Net weight: 145 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid swelling when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters/hour - Peak cooling capacity*: 330 liters/hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Connection values: 230 V - 50 Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 20 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 80 kg Ledpjivdvvjfx Akyjrn - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with 12 months warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid hydration when mixing without ice Lrjdpjivdu Uofx Akyjn + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L60): + €399.00 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid swelling during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing is possible using a water mixing and dosing device + water-carrying parts are made of stainless steel and require no cleaning + hygienically flawless, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel cooling evaporators + multi-stage stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing devices with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling capacity*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W - Water connection: 1/2 inch Lrjdsivdvkepfx Akyon - Water flow rate at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * with +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid hydration during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit Ljdpjivdvcjfx Akyjrn + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel refrigeration evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L100): + €389.00 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters / hour - Peak cooling capacity*: 180 liters / hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Ledpfey H Hk Aox Akyern Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Ledpey Hkgbefx Akyern Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Lsdjy Hkd Hjpfx Akyern Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Lodpfjyzc Ruox Akyern

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Lrodpfxeza Dv Ij Akyon 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Lredpeua Tbwefx Akyon Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS Ljdpexu Upmsfx Akyorn System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW Lsdpjul T Uisfx Akysrn

Condition: new, Setting total time Lrodpfoul Ua Tjx Akyon Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW

Year of construction: 2023, condition: excellent (used), Flowtech Flowboost 2V JH1 water pump system with tank Lredpfjuliansx Akyjn 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength Lsdpey H Egvsfx Akyjrn detection and seamless integration with HPLC systems. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Includes Waters e2695 Seperations Module Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished) Ledpfx Aey H E Slskyorn

Condition: good (used), mileage: 179,560 km, power: 382 kW (519.37 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 750 l, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 6,510 mm, total width: 2,530 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, onboard computer, parking heater, power assisted steering, power mirror, spoiler, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum fuel tank - Automatic headlights - Brake booster - Sunroof - Roof spoiler - Differential lock - Euro 6 - Remote central locking - Adjustable steering wheel - Air conditioning - LED daytime running lights - Leather steering wheel - Air suspension - Front center armrest - Rain sensor - Sleeper cab - Sun visor - Stability control - Auxiliary heater = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Lodpfx Akezghhaoysrn Transmission Transmission: OPTIDRIVER, 12 gears, automatic Axle Configuration Front axle: Max. axle load: 8000 kg; steered Rear axle 1: Lift axle; Max. axle load: 7500 kg; steered Rear axle 2: Dual tires; Differential lock; Max. axle load: 11500 kg Weights Unladen weight: 8,748 kg Payload: 18,252 kg GVW: 27,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 02/2027 Technical condition: good Optical condition: good Identification License plate: 38-BRD-1

Condition: excellent (used), Weiss WT-270/70/10 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Year of manufacture: 2006 Machine type: Temperature testing chamber / Climate testing chamber Test chamber volume: approx. 270 liters For sale is a used temperature testing chamber from the manufacturer Weiss Umwelttechnik. The unit is suitable for temperature testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical data Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 10 K/min Temperature change rate (cooling): approx. 14.5 K/min Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure (ND max.): 19 bar g Maximum discharge pressure (HD max.): 25 bar g Standing pressure: 17 bar g Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Insert grid / Test chamber equipment as shown in the pictures Control cabinet Main switch panel RS232 interface Documentation / Operating manual Scope of delivery Ljdpfx Aezgcqvskyern 1x Weiss WT-270/70/10 Temperature Testing Chamber Existing documentation / Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Here we offer a Millipore water purification system, Elix 3. Purifies 3 liters of water per hour. Condition: used. Scope of delivery: (See image) Lodozgcbzjpfx Akyorn (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Lrodpfszf Ibksx Akyen Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), CTS TS-70/350-10/S Temperature Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/350-10/S Machine Type: Temperature Test Chamber / Stress Screening Test Chamber Test Chamber Volume: approx. 350 liters For sale is a used temperature test chamber from the manufacturer CTS. The system is suitable for temperature testing, stress screening, environmental simulations, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 10 K/min Temperature Change Rate (Cooling): approx. 10 K/min Test Chamber Volume: approx. 350 liters Test Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) Housing Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 750 kg Power Connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated Current: 25.7 A Protection Class: IP22 Refrigerant (Pre-cooling Stage): R404A, 4.0 kg Refrigerant (Cooling Stage): R23, 2.1 kg Operating Pressure: 25 bar Test Pressure: 27.5 bar Equipment Multi-touch controller with program generator Touch panel operation Viewing window in the door Interior made of stainless steel USB interface Ethernet interface RS232 interface Software temperature limiter Over-temperature test item protection Shelves / test chamber equipment as shown in the pictures Documentation and operating manual available Special Features Water-cooled design Cooling water connection required Compressed air connection required Operation only possible with connected cooling water circuit and compressed air supply Lrsdpfozf Hz Nsx Akyjn Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery CTS TS-70/350-10/S temperature test chamber Existing documentation Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: used, This listing is for the Elga Veolia Purelab Water Purification System with LA757 The unit is in full working condition and ready for immediate use Designed to deliver high-quality purified water for laboratory applications, this system is compact, efficient, and suitable for analytical and research environments requiring consistent water purity. Lredpfoyyn D Dsx Akyjn Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2019, operating hours: 3,577 h, condition: excellent (used), Weiss Climatic Test Chamber ClimeEvent C/1000/70/5 Type: C/1000/70/5 Manufacturer: Weiss Technik GmbH Year of Manufacture: 2019 Design: Water-cooled Operating Hours: approx. 3577 h For sale is a Weiss ClimeEvent climatic test chamber with a 1000-liter test chamber. Suitable for temperature and climate tests in industry, automotive, electronics, as well as research and development. Temperature and climate data: Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10 % to 98 % RH Test chamber: Volume: approx. 1000 liters Internal dimensions: approx. 950 x 1100 x 950 mm Dimensions: External dimensions: approx. 2000 x 1415 x 2030 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerant: R449A / R23 Weight: approx. 1300 kg Application: Temperature tests Climate tests with humidity Temperature cycling tests Endurance tests Condition: Used The device was last in operation Scope of delivery: Weiss ClimeEvent C/1000/70/5 Accessories as shown in the pictures Ljdsy Iyx Aspfx Akyjrn Inspection possible by arrangement. Loading can be organized. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Temperature Testing Chamber Type: WT3-600/70/5 Manufacturer: Weiss Umwelttechnik For sale is a high-quality Weiss temperature testing chamber WT3-600/70/5 for professional temperature testing in industry, research, development, and quality assurance. The unit features a modern S!MCON / 32 control system with a touch panel for convenient operation and programming of the test sequences. Ljdpfoy Nibpox Akyern The testing chamber is water-cooled and designed for demanding temperature tests in the range of -70 °C to +180 °C. Equipment: S!MCON / 32 control system Control panel with touch panel Adjustable feet Feedthroughs on the left and right R1 feedthrough, nominal diameter 125 mm L1 feedthrough, nominal diameter 50 mm Test chamber lighting Water-cooled design Technical data: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 600 liters Internal dimensions: approx. 800 x 950 x 800 mm (W x H x D) Temperature performance data: Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 1.5 K Heating rate: approx. 7.5 K/min Cooling rate: approx. 7.5 K/min Heat compensation: max. 2500 W Electrical data: Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: approx. 23 A Rated power: approx. 13 kW Fuse: 16 A, slow-blow Refrigerant: R404A / R23 Dimensions: With hinges and door lock: approx. 1090 x 1995 x 1660 mm (W x H x D) Without hinges and door lock: approx. 1000 x 1995 x 1660 mm (W x H x D) Weight: approx. 620 kg Sound pressure level: approx. 58 dB(A) Scope of supply Scope of supply as shown in the images Grid cut tester with accessories in a transport case Condition Used Optical condition as shown in the images Normal storage and usage marks are present Important note: All information has been compiled to the best of our knowledge based on the images, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.