Used Letica Shock Generator for sale (10,049)

Condition: like new (used), Good working condition. Please check out our other listings as well. Iaodpfsh Aupdex Ab Not

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Ijdexfrv Eopfx Ab Neat Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Boiler plant for production of steam. Iaodpfxsy Av Rdj Ab Not Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Iaedpfx Abeyl Nnte Njt

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Iasdpfox U Tgmjx Ab Net Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Iaodpjw U N Daefx Ab Not

Year of construction: 1998, condition: used, functionality: fully functional, (USED) General Cargo Container in Steel, approximate measurements 12 m long x 2.30 m wide x 2.30 m high, Year 1998. Please Inspect. DOES NOT INCLUDE CONTENTS, DELIVERY WILL BE MADE WHEN THE CONTAINER IS EMPTY Ijdpfx Absy Sirgs Nsat (USADO) Contenedor de carga General en Acero, medidas aproximadas 12 m de longitud x 2.30 m de ancho x 2.30 m de altura, Año 1998. Favor de Inspeccionar. NO INCLUYE CONTENIDOS, LA ENTREGA SE REALIZARÁ AL VACÍAR EL CONTENEDOR

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Ijdpsruakgsfx Ab Noat Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Iaedjxaqa Sepfx Ab Not Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Iodpfx Ajxdfazob Noat Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Iasdpfx Aboxdfa Us Nst Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Iajdpfx Absrtryks Net Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, This listing is for the Peak Scientific Corona Nitrogen Generator 1010 paired with the Corona Air Compressor. Isdpoxwc Iiofx Ab Njat The unit is in full working condition and is ready for immediate release. System Details: The Peak Scientific Corona Nitrogen Generator 1010, paired with the Corona Air Compressor, is engineered to meet the demands of labs requiring high-purity nitrogen, specifically designed for applications like chromatography. The Corona 1010 is ideal for the Thermo Scientific Corona Veo Charged Aerosol Detector and is also suitable for LC, HPLC, and UHPLC applications, providing nitrogen flows up to 5 L/min at 80 psi. Key Features: Maximum Gas Flow: 5 L/min Maximum Output Pressure: 80 psi (5.5 bar) Maximum Purity:

Condition: new, Year of construction: 2007, color: green, power: 190 kW (258.33 HP), total length: 4,010 mm, total width: 1,600 mm, total height: 2,100 mm, Empty weight: 15.400 kg Power: 180 Iajdpfxsy Snxls Ab Nst Current frequency: 50 Hz Voltage: 400

Condition: used, Year of construction: 2023, operating hours: 4,287 h, machine/vehicle number: ESF407158, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Iaedpfx Absy N Ngle Not Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1,354 h, machine/vehicle number: ESF407086, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Iaedpfoy N I U Iox Ab Nst Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1,308 h, machine/vehicle number: ESF407089, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Ijdpfxey N Na Eo Ab Njat Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 4,524 h, machine/vehicle number: ESF407189, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Iodpey N Ndkjfx Ab Neat Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 7,563 h, machine/vehicle number: ESF407077, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Iedpfxjy N Naro Ab Neat Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, machine/vehicle number: T57F0019080055255, fuel type: diesel, power: 65 kW (88.38 HP), motor manufacturer: -, Field of application: Construction Empty weight: 83 kg Generator capacity: 8 kVA Iaodpfjtr Ivwex Ab Njt Transport dimensions (LxWxH): 0.68x0.55x0.55 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 2,017 h, machine/vehicle number: D 22389, fuel type: diesel, power: 791 kW (1,075.46 HP), motor manufacturer: Iveco, Field of application: Construction Empty weight: 1.390 kg Iedpfx Aotr Iwfob Noat Generator capacity: 100 kVA Dimensions of cargo space: 267 x 113 x 170 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Empty weight: 2.150 kg Isdetr Iw Hspfx Ab Njat Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 9,482 h, machine/vehicle number: ESF372661, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Iaodpfx Ajtr Ix Deb Not Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 3,210 h, machine/vehicle number: ESF407191, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Iajdotr Ixcspfx Ab Nst Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: K24I158166, fuel type: diesel, power: 35 kW (47.59 HP), motor manufacturer: Cummins, Field of application: Construction Empty weight: 842 kg Generator capacity: 38 kVA Transport dimensions (LxWxH): 1.96x0.82x1.28 Please contact PFEIFER GROUP for more information Ijdpfev Uhquox Ab Nsat