Used Lindner Thread Grinding Machine for sale (65,863)

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm thread pitch max. 3 mm Kodpfsyb S N Sjx Afdsdk workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm Kdedpfx Afjyb S Rijdjk thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. Kdsdpfx Aowvl H Usfdjk inclination li/re +/-10 ° total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm boring diameter 100-500 mm control Sinumerik 840D Kdsdpowzmqrofx Afdok

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Ksdpsx Dm Dnjfx Afdodk

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm Kdodpfxsw Ed S Us Afdsk centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Year of construction: 2016, condition: ready for operation (used), Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000mm/3000mm, total weight: approx. 13000kg, inspection possible by arrangement. Kdedpsylbr Djfx Afdek

Condition: not inspected (used), Weight: approx. 4,500 kg Kedpfxowv N Ehs Afdedk

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t Kedpfxot H Smtj Afdjdk dimensions of the machine ca. m

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm total power requirement 17 kW Kdsdpfxet Hxbds Afdjk weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. Kdsdpfjt Hw U Ajx Afdjk * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm Kodst Hwnpopfx Afdjdk thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: Kdsdpfx Aoxx Uudofdjk • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing * DC injection breaking unit fitted. Kdjdpfswxrnwex Afdok *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: excellent (used), Year of construction: 1988, operating hours: 1,000 h, functionality: limited functionality, machine/vehicle number: 99223, overall weight: 2,800 kg, Grinding Dia: min=0.8 to max 250 mm; Vertical stoke : 90 mm; Max. travel of the grinding head :300 mm Table size :320x600 mm; Max stroke of the table Tranversal 250 mm, Longitudinal 400 mm; Electric motor speed 80000 rpm, Pneumatic 180000 rpm. Dimensions 1585x1260x2665 mm, Weight: 2800 kg Kodpfsxvccdsx Afdedk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001 Kdedpfx Aetr Azksfdjk

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1834, overall weight: 325 kg, tool diameter: 160 mm, tool height: 230 mm, water tank capacity: 30 l, TECHNICAL DETAILS Kdedpfx Asyx Hwtsfdjk Maximum tool diameter: 160 mm Maximum tool height: 230 mm MACHINE DETAILS Water tank capacity: 30 L Dimensions & Weight Dimensions (L x W x H): 675 x 765 x 1650 mm Machine weight: 325 kg EQUIPMENT Grinding area made of aluminium Siemens touch-screen operator interface Information display for ongoing operations and alarms Automatic grinding height detection Automatic regulation of working pressure and grinding speed Straight or angled grinding possible Tool drawer High-quality grinding wheel (CBN) Water pistol for cleaning Operating light with different colors Integrated modem with remote connection port Spare grinding wheel Motor with frequency inverter for three-phase 380 V and 220 V power

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2449-01, grinding width: 1,350 mm, grinding height: 150 mm, feed rate X-axis: 12 m/min, grinding wheel diameter: 1,380 mm, TECHNICAL DETAILS Workpiece dimensions (length x width) min.: 30 x 30 mm Workpiece dimensions (width x height) max.: 1,350 x 150 mm Abrasive belt dimensions: 1,380 x 1,900 mm Disk diameter: 1,380 mm Abrasive belt unit speed: 8–22 m/s Disk unit speed: 10–22 m/s Feed rate (frequency-controlled): 2–12 m/min MACHINE DETAILS Electrical specifications Feed motor (frequency-controlled): 2.6 kW Abrasive belt (W): 18.5 kW Disk (RD): 12.9 kW Electrical connections: 400 V Frequency: 50 Hz Control current: 110 A Kjdpfx Afjyx Hhxjdodk EQUIPMENT Disk unit (RD) with abrasive fleece disc 2 abrasive belt units (W) placed before and after the disk unit

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Table size: 500 x 1,600 mm Kodpfx Ajyymkcefdedk Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Grinding wheel flange and puller Wheel dresser stand MPG handwheels for Y/Z axis Operating manual Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg Kjdjyym Emepfx Afdodk EQUIPMENT New coolant tank with paper filtration system

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Kjdpsrtr D Isfx Afdodk Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: good (used), Jones and Shipman Suprema 650 M Easy Universal OD/ID Cylindrical Grinder s/n SO19131, w/ J&S PLC Control, 12" Swing x 25" Centers, Swivel Wheelhead w/ OD & ID Capability, Internal Spindle, Hydromation Coolant System, Heidenhain DRO, Workholding NOT Included Ksdpoywfyqjfx Afdedk

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Kedpfx Afjywftkedjdk

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Kjdpoywftdefx Afdsdk

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Kjdexh Rqtspfx Afdodk Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°