Used Lister Kl5L for sale (30)

Condition: used, Lister KL5L air-cooled chiller The unit operates based on the principle of indirect cooling: The internal pump pumps cold water from the integrated tank to the external process (e.g., a machine). The water absorbs heat there, warms up, and flows back into the Lister integrated evaporator. The warm water transfers its energy to the refrigerant, and the water is cooled down again. The extracted heat is released into the installation room as warm air via the fan. Due to its compact 3.25 kW cooling capacity, this model is ideal for smaller industrial applications, such as cooling laboratory equipment, laser systems, small welding units, or machine tools. Manufacturer: Lister Ledpfsx Elvzsx Amzjhn Type: KL 5 L Cooling capacity: 3.25 kW Voltage: 400 V Frequency: 50 Hz 6.3 Amps Refrigerant: R 134a Max. operating pressure: 13 bar Dimensions (W x D x H): 940 x 560 x 1100 mm You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 1945, condition: used, New: No Year of construction: 1945 Ledpfx Amswz H Uqjzjhn Serial number: 15 HP LISTER DIESEL TAKEN OUT AN OLD ALUMINIUM SLOOP EXACT AGE UNKNOWN.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.: 167, type of input current: three-phase, input voltage: 380 V, total width: 800 mm, total length: 5,300 mm, total height: 1,900 mm, year of last overhaul: 2025, overall weight: 2,200 kg, pressure: 70 bar, We offer this used Ruian 260 blister packing line, year of construction 2019. Punching frequency: 21 times/min Max pulling length: 230 mm Max forming depth: 20 mm Max forming area: 250×220 mm Total power: 12 kW Voltage: 380 V Voltage frequency: 50 Hz Air consumption: 1 m³/min Pressure: 7 MPa Machine dimensions: 5300×800×1900 mm Weight: 2200 kg Lsdpj Adq Ibefx Amzehn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Lhedpfx Ajy Anifemzjn

Condition: used, Year of construction: 2018, Materials for blister packaging: PVC + coated PVC, PETG + PETG, PET GAG + PETGAG, PS + Complex, operating mode: intermittent, max. output: 12cycles/min, forming film width: 180-350mm, max. forming film diameter: 400mm, max. forming film thickness: 500µm, film transport tolerance (motor): +/-0.2mm, forming area: 150-310x100-210mm, max. sealing pressure: 950kg, max. punching pressure: 10,000kg, max. forming depth: 60mm, sealing temperature: 80-200°C, vacuum pump power: 0.75kW, vacuum pump capacity: 20m³/h, forming heater power: 4.8kW, air consumption: 34m³/h, connected load: 13kW, length: 5530mm, width: 880mm, height: 1460mm, with documentation, Videojet 1520 continuous inkjet printer and Lauda Ultracool UC-0080 recirculating chiller. An on-site inspection is possible. Lodpfx Asz Agf Nemzohn

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS Ledpfx Aszcftgemzshn • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Lsdpfx Aozvycnsmzshn Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Year of construction: 2022, condition: used, functionality: fully functional, ROMACO NOACK BLISTER PACKAGING LINE, MODEL UNITY 300 Lsdpfx Aoytgqhemzohn Single-track blister packaging machine with rotary sealing and a continuous motion cartoner designed for low to medium speed segment. The modular line for connection to different track & trace systems and end of line packaging solutions. Built in 2022. MACHINE CHARACTERISTICS - Blister tracks: 1 (max) - PDA interface OPC UA and Remote Assist connection Ethernet PRODUCTION - Output blisters/minute: 300 (max) - Output cartons/minute: 10 – 300 (min-max) - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm DIMENSIONS - Machine dimensions: 8,270 × 1,890 × 2,230 mm - Weight: 5,300 kg (approx)

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 320539B, functionality: fully functional, power: 1.7 kW (2.31 HP), type of input current: three-phase, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, number of axes: 3, number of slots in tool magazine: 4, actuation type: electric, total height: 1,890 mm, total length: 2,900 mm, total width: 1,650 mm, overall weight: 1,400 kg, table length: 99,999 mm, table width: 1,300 mm, Equipment: CE marking, We are offering this virtually new Vitap K3 throughfeed machining center, manufactured in 2023. Additional equipment: 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parameter tools, and parametric settings Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming DXF file import CE compliant Advantages of the machine: Qualitative machine advantages Technical advantages of the machine: Feed rate: 25 m/min Automatic 4-position tool changer Max. Horizontal tool Ø: 12 mm Max. Vertical tool Ø: 35 mm Motor: 1.7 kW Number of independent vertical axes: 12 // number of independent horizontal axes on the X-axis: (2+2) Max. Horizontal drilling depth on X and Y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the Y-axis: (2+2) Electrospindle: 5 kW with ISO30 taper (rpm 12000-24000) Max. Workpiece dimensions: Y 1250 mm, Z 50 mm Min. Workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Additional information: Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feeding system Y-axis: drilling head movement Z-axis: drilling operations Optional upgrades (at an extra cost): Tool set for production start Tool holder ISO 30 / ER 32 Lubricant cartridges PC with more powerful processor Extra pneumatic top pressure Nesting system Barcode scanner Post-processor for MPR files License for TPA office software Front and rear roller support Narrow part guides Optional clamping opening for 60 mm thickness Options for angular transmission CAD design software for furniture construction *There may be differences between the displayed data and the actual values. *There is no warranty on this machine; the price is an "as is" price. If you have any questions or would like more information, please feel free to send us a message or call us. Lhjdpfx Amszv U Ncezjn Available for pickup in Enkhuizen around the beginning of October 2026.

Condition: used, Year of construction: 2006, functionality: fully functional, UHLMANN BLISTER LINE Blister line for pharmaceutical production in cleanrooms. From a GMP-compliant cleanroom environment and regularly maintained, fully automated and modular, easy to integrate into existing production lines. Comes with complete technical documentation, and has been decommissioned for internal production. Consisting of: 1) UHLMANN BLISTER PACKER, MODEL UPS 4 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 15-50 cycles/min - Forming width: 62 - 226 mm (min - max) - Blister format: min. 60 mm; max. 140×39 mm - Depth: pvc 12 mm; alu 10 mm ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 30 A DIMENSIONS - Weight: 4.950 kg 2) UHLMANN CARTONING MACHINE, MODEL C2206 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. output: 200 cartons/min. - Max. carton size: 130 x 100 x 200 mm - Max. no. of blisters: 10 - Closures: tuck-in, hot-melt - Products: blisters, bottles DIMENSIONS - Weight: 6,000 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 15 A 3) INOVA LABELLER, MODEL EKK 62 Year of construction: 2006 ENERGY CONSUMPTION - Voltage: 230/400 V - Frequency: 50 Hz - Current draw: 9 A 4) INOVA ASSEMBLY AND EJECTION UNIT, MODELS VSM1221 + TD210 Year of construction: 2006 ENERGY CONSUMPTION (BOTH MACHINES) - Voltage: 230/400 V - Current draw: 5 A 5) BAUSCH + STRÖBEL TRAYPACKER, MODEL ESS1001 Year of construction : 2013 PRODUCTION CHARACTERISTICS - Max. output: 12.000/hour - Label length: 20 mm - 120 mm - Label height: 15 mm - 80 mm DIMENSIONS - Weight: 900 kg 6) HAPA INKJET PRINTER, MODEL H-230 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. cycles: 120 cycles/min - Max. print speed: 21.6 m/min - Printhead resolution: 360 dpi - Belt width (min - max): mm 64 - 310 - Feed length (min - max): mm 30 - 180 - Print length (min - max): mm 30 - 180 7) SORTIMAT BLISTER HANDLER, MODEL CL400 VTS Year of construction: 2016 DIMENSIONS - Weight: 2,340 kg ENERGY CONSUMPTION - Power: 3.4 kW / 5.0 A 8) UHLMANN BUNDLING MACHINE, MODEL E 3060 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 60 bundles - Carton sizes: 130 x 105 x 250 mm (max) - Bundle size: 250 x 150 x 250 mm (max) - Infeed capacity: 500 cartons Lodpfx Amjzbhnwszshn DIMENSIONS - Size: 1,400 x 2,000 x 4,300 mm (approx.) - Weight : 2,100 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 18 A 9) OPTIMA SYRINGE DISPENSER, MODEL SH120 Year of construction: 2008

Condition: ready for operation (used), Year of construction: 2008, A Uhlmann blister packaging line in need of repair is available. 1) Uhlmann UPS 4 ETX blister machine, year of manufacture: 2008, design: modular balcony design, modules: 12, blister capacity: 10 tablets, blister format X/Y/Z: 100mm/39mm/5.7mm, packaging output: 220blisters/min, roll width forming/sealing: 256mm/246mm, feed: 102mm, max. forming film roll diameter: 800mm, max. lidding film roll diameter: 300mm, filling section length: 1360mm, theoretical output: 50cycles/min, film width range: 63mm-300mm, punching width range: 28mm-284mm, max. forming depth: 12mm, min. blister dimensions X/Y/Z: 30mm/3.5mm/60mm, max. blister dimensions X/Y/Z: 110mm/12mm/145mm, max. stack height: 85mm, max. blisters per stack: 10, weight: approx. 7000kg. 2) Uhlmann C 2155 cartoner, year of manufacture: 2008, cartoning output: 10-150cartons/min, max. stacking output: 400blisters/min, product carrier height: 87mm, magazine length: 1500mm, max. blister width with double-stack insertion: 55mm, max. magazine capacity: approx. 1200cartons, max. leaflet dimensions X/Y: 210mm/600mm, min. leaflet dimensions X/Y: 100mm/100mm, min. carton dimensions X/Y/Z: 30mm/15mm/63mm, max. carton dimensions X/Y/Z: 115mm/90mm/150mm, weight: approx. 3200kg. The rear reject flap of the C 2155 is no longer present. The safety shut-off valve of the UPS 4 is defective, and the touchscreen monitor responds too slowly. Overall line dimensions X/Y/Z: approx. 14000mm/5500mm/2750mm, weight: approx. 10200kg, control system: PC/PLC. Documentation available. An on-site inspection is possible. Expected to be available from the end of August 2026. Ledpozbl Nlsfx Amzehn

Condition: ready for operation (used), Year of construction: 2005, Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Expected to be available June 2026. Ljdpfx Amjylbrkjzshn

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Ljdpfxjyyplce Amzshn

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. Lhjdpfx Aey Slchjmzjn - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) - Air supply: 700 Nl/min, 6 - 8.5 bar - Cooling device: Chiller Euro cold ACW-LP 16T Blisters: - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Possible to supply with IMA A83 horizontal cartoning machine

Condition: used, Year of construction: 1990, The Adolf Illig SB 53C - DIN is a used skin and blister packaging machine (universal vacuum thermoforming machine). It was developed for the economical production of transparent blister packaging and for the direct skin packaging of products onto cardboard backing cards. The used skin and blister packaging machine was installed at a university and used exclusively for teaching purposes. Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Technical doc.: Yes Condition: Second hand Price: By request Power consumption & electrical system: Heating capacity: 4.5 kW (provided by 15 ceramic surface heaters for uniform heating) Drive motor power: 1.24 kW Vacuum system: Maximum vacuum level of 0.95 kp/cm² (frequently operated with Busch vacuum pumps) Air consumption: Approx. 30 litres per working cycle. Film roll holders: Film roll diameter for Blister packaging: Max. 400 mm Film roll diameter for Skin packaging: Max. 350 mm Lhjdpfx Aoxm Sa Homzjn Film roll core diameter: 70 mm. Format ranges & capacities: Maximum forming area: 405 × 500 mm Packaging / cardboard size: 400 × 495 mm Maximum draw depth: 100 to 150 mm (both positive and negative forming possible) Maximum packaging height: 150 mm Film width: 445 mm. Dimensions and weight: Machine dimensions: Approx. length 1.600 mm × width 1.135 mm × height 2.710 mm Empty weight: Approx. 500 kg.

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm Lhsdpfx Astndpzomzon min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, Year of construction: 2008, functionality: fully functional, O.M.A.R. FANTASY PLUS – PHARMACEUTICAL BLISTER MACHINE For sale: O.M.A.R. / Dott. Bonapace FANTASY PLUS semi-automatic blister machine, used in pharmaceutical production, supplied with extensive original format tooling and comprehensive technical documentation. TECHNICAL DATA Manufacturer: Dott. Bonapace & C. / O.M.A.R., Italy Model: FANTASY PLUS Year: 2007 Voltage: 220/230 V Operating pressure: 9 bar Weight: approx. 125 kg CE compliant APPLICATION Suitable for pharmaceutical R&D, laboratories, clinical batches, stability studies, samples, and small production batches. According to the original documentation, the machine is designed for: - PVC/ALU Oblong - PVC/ALU Round - ALU/ALU Oblong - ALU/ALU Round Ledpfx Amjzxc Apezjhn EXTENSIVE TOOLING A major advantage is the exceptionally large quantity of format tooling included. The package contains numerous forming, sealing, and die-cutting components for different blister configurations, including: - Forming molds and plates - Heated forming/blowing plates - Sealing plates and molds - Cutting dies and counter plates - Centering components - Various format inserts - Coding/embossing accessories - Additional format-specific components Different round, oblong/oval, and rectangular cavity configurations are available. All tooling shown in the photos is included. Due to the large quantity of tooling, the exact allocation of every individual component to a complete format set cannot be guaranteed. DOCUMENTATION Comprehensive original documentation in German is included, covering CE documentation, technical data, operation, forming, sealing, die cutting, ALU/ALU processing, maintenance, spare parts, and tooling codification. Original drawings for individual blister formats are also available. CONDITION Very well-maintained used condition from pharmaceutical use. Inspection and demonstration by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. PRICE: EUR 32,500 net, negotiable CYCRON GmbH Switzerland Subject to prior sale and errors.

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Ledoif Elgepfx Amzjhn

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Ljdpfx Amjyzf Ucezohn Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical Data Blister Module (B 1770) Max. Output 700 blisters/min Application area Solid products Max. format range [Feed x Width] 200 x 284 mm Cartoning Module (C 2305/C 2504) Max. Output 300 or 500 folding cartons/min Application area Blisters Lsdpfx Amov D Ipiezshn Max. folding carton size [A x B x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm See PDF for details.

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. Lhodpfxozuxdbj Amzen The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Max. drilling depth vertical: 45 mm Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 801657, type of input current: three-phase, total height: 1,900 mm, input voltage: 380 V, total width: 1,150 mm, total length: 4,250 mm, overall weight: 1,500 kg, working height: 900 mm, compressed air connection: 6 bar, warranty duration: 6 months, air demand: 0.6 m³/h, power: 1.5 kW (2.04 HP), Equipment: documentation/manual, Indexed case packer ZHJ-150 Display machine/ trade fair machine Multifunctional cartoning machine ZHJ-150 The ZHJ-150 automatic cartoning machine is suitable for packaging aluminum-PVC blisters, round bottles and special bottles, molded bottles and similar products. Instruction leaflets can be folded automatically, cartons erected, products fed in and the cartons closed again (offset plug-in closure). The cartons can be embossed. This machine has a PLC control system and each station is monitored by photoelectric sensors. If a problem is detected during operation, the machine stops automatically and indicates the fault. This machine can run as a single machine and can also be connected to a blister packaging machine and other pre-machines. The machine can be inspected at any time at our premises in 73084 Salach/Germany and tested with your products. Depending on the product, it is also possible to order a new machine from us. We also have various blister and cartoning machines to offer. Lsdpfx Amotib Uyszohn Technical data: max. speed = up to 130 cartons/min Carton size = width (20-90mm) x length (50-190mm) x height (15-60mm) Leaflet size unfolded = Max.240x180mm (LxW) / Min.115x100mm (LxW) Leaflet folder = up to 3 paper folds possible Blister feeder magazine = 100cm long / number of blisters/cartons to be packed selectable Bottle feeder = screw conveyor Leaflet control in folding box available Automatic ejection of bad packs

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. Ljdpfjzvduuox Amzshn - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Turntable Lhjdpfx Asuhn Dijmzon

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Lhodpfx Ajpfcd Ajmzen Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)