Used Lithec Inpress Control Lithec System For Heidelberg Xl75 for sale (66,360)

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet Dodpfeyrp Umex Adrjku • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg XL 75 - 4 + L X – 2019 Serial Number : LS001746 Year of Manufacture : 2019 Impression Count : 100 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER XL 2 • INPRESS CONTROL 2 (Inline Color and Register Measurement System) • AUTOPLATE PRO (totally automatic plate change) • WALLSCREEN XL • SPEED : Option 18.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller (13 cm³ per m² cells) • Extended Delivery (X2) • Infra-Red Dryer • Preset PLUS Feeder & Delivery (full automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • FilterStar • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet) • Pneumatic compressor • PowderStar Weko AP 500 Powder Spray • Advanced antistatic device in feeder & delivery • Electronic double sheet and side lays control • Powder/process air suction CleanStar Compact Djdpfx Adez Du Hhjreku • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in France

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Heidelberg XL 106 - 4 + LX - 2018 Year of Manufacture : 2018 Serial Number : FS002358 Impression Count : 93 mio imp. 4 colors + Coater Offset Press of size 75 x 106 cm Equipment : • High Pile Extended Delivery (X2) • Coating Unit with Anilox roller and chambered ductor Blade • Infra-Red Dryer DRYSTAR • PRINECT PRESS CENTER XL • WALLSCREEN XL • Prinect INPRESS CONTROL (Inline Color and Register Measurement System) • Heidelberg Autoplate PRO (fully automatic plate change) • Feeder & Delivery Preset PLUS (automatic Size Setting) • ALCOLOR dampening with VARIO • Ink Temperature Control • Technotrans Central Refrigeration CombiStar with Alcosmart – air cooled • ALL Automatic washers (blanket, rollers and impression cylinders) Dkjdpfozw H Dnjx Adrou • WEKO AP 500 Powder Spray • Light-weight paper kit • FilterStar Compact • CleanStar Compact (Powder Exhauster) • Steel Plate in feeder and delivery • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet – air cooled) • Pneumatic compressor with compressed air dryer • Antistatic device in feeder and delivery • SPEED : 18.000 Sheets Per Hour Fantastic machine – FULL OPTIONS ! In very good condition, very well maintained. Can be seen in production – available shortly

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg Speedmaster XL 75 - 4 + L X – 2019 Serial Number : LS001736 Year of Manufacture : 2019 Impression Count : Only 72 mio imp. ! 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER XL 2 • AXIS CONTROL 2 (Spectrophotometric colour measurement ) • AUTOPLATE PRO (totally automatic plate change) Djdpfsyt H A Rex Adreku • COATING UNIT with chambered doctor blade and Anilox Roller (13 cm³ per m² cells) • Extended Delivery (X2) • Infra-Red Dryer • SPEED : Option 18.000 Sheets Per Hour • Preset PLUS Feeder & Delivery (full automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • FilterStar • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet) • Pneumatic compressor • PowderStar Weko AP 500 Powder Spray • Advanced antistatic device in feeder & delivery • Electronic double sheet and side lays control • Powder/process air suction CleanStar Compact • Air Cooled machine • Can print up to 0,8 mm Machine in very good condition… Available immediately Can be seen running, any print test welcome !

Condition: good (used), Year of construction: 2010, Assembly machine / production line Previously, the upper and lower parts were assembled and pressed together using this device. Components include: Kuka Scara KRC2sr robot, manufactured in 2010 Pneumatic control system Electrical control system with frequency inverter 4 conveyor belts Robot description: Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point of working space: intersection of axes 3 and 4 Weight: approx. 20 kg Robot data sheet Dedpjglp Uyefx Adreku Control system data sheet You can find more new and used items in our shop! International shipping costs upon request! Item condition: used

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet Djdpfx Aszlh Aujdrsku application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Djdpfxsxu Upms Adrjku Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. Dksdjznlbgopfx Adrou The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation Dsdpjyc H N Nefx Adrsku • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), Year of construction: 2014, Heidelberg XL75-4+LX Anicolor, ref. 3023 Year 2014 IR + hot air drying Djdpfxozrp The Adreku Extended delivery length: 160 cm 185 million impressions Maximum sheet size: 607 x 750 mm Non-Stop feeder Non-Stop delivery In very good condition!!!!

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Dodpfx Aox An Ursdreku

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Dedpoxwc Euefx Adroku Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers) Djdpsyc H R Tefx Adrsku

Condition: good (used), FOBA FD84S sensor for YAG laser marking systems For sale is a used FD84S sensor from the manufacturer FOBA. This sensor is intended for use in YAG laser marking systems. Technical details: Manufacturer: FOBA Model: FD84S / S50 Design: Sensor / laser control component Laser class (system application): 4 Wavelength: 1064 nm Laser power (system application): 70 W Dkjdpfsxlq Exsx Adrou Pulse power: 10 kW Pulse duration: 70 ns Application area: Spare part / component for FOBA laser marking systems Condition: Used, functional Buy FOBA FD84S sensors and other items at affordable prices – Buy from the professional for the professional – You will find other attractive offers in our SHOP.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg CX 75 - 4 + L – 2018 Year of Manufacture : 2018 Impression Count : 55 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER • EASYCONTROL (Color Measurement System) • AUTOPLATE (automatic plate change) • SPEED : 15.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller • High Pile Delivery • Infra-Red Dryer Dedpfjz E N A Tjx Adroku • Preset Feeder & Delivery (automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • Antistatic Device • Pneumatic compressor • Weko AP 262 Powder Spray • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in Germany

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: MAHLO Qualiscan QMS / WebPro M industrial measuring and quality control system, manufactured in 2020. The system is designed for continuous measurement and quality monitoring of web materials in industrial production processes. Technical data: Manufacturer: MAHLO GmbH + Co. KG Type / Model: QMS WebPro M Year of manufacture: 07/2020 Serial / factory no.: 01010134 / 013673 Power supply: 230 V, 1L/N/PE Frequency: 50/60 Hz Protection class: IP43 Made in Germany Equipment included / visible MAHLO WebPro M measuring frame Traversing measuring system Measuring heads / sensors TEXTEST FX 3500-X20 sensor Electrical control cabinet Large HMI operator panel Control system Pneumatic components Cabling and installation components The system comes from a professional industrial production facility. Dkjdpfx Aozuc Uwedrju The machine is offered as a complete system as shown in the photos. Condition: Used (for very short time, hence like brand new), visually in very good condition. Additional photos and technical information are available upon request. Please contact us for further information.

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Dksdpfjx S Npfex Adreu Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories

Condition: excellent (used), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up processes to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every application. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary, built-in screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive. Memory Capacity Between 2,500 and 8,500 screw fastening results per station, depending on the number of cycles and the operating mode (asynchronous or synchronous). Tightening Strategies – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Predominant torque Dksdjwxv Hkepfx Adrsu – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable Tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SYSTEM ATBF170, The burger forming machine (for burger products with a diameter of 38 - 170 mm and a height of 7 - 30 mm) including the UNIVERSAL CONVEYOR BELT UTV-200/1500 was newly purchased in 2021 as a backup for an identical machine already in use. It was only set up and then operated for just one day. Therefore, the machine is practically new and ideally suited for producing patties, oval, round, or square-shaped nuggets. The forming machine is fed by a vacuum filler, which is not included in the price. The machine is currently set to a capacity of 3,000 patties in an 8-hour shift. It can most likely handle even more. - Pneumatic operation - Ejection plate with water spray system - Synchronous control, 24 V connection - Compressed air: 10 m³/h, 6 bar - Portioning output: approx. 100 portions/min. (product-dependent) - Includes 1 base frame - Without forming insert - Without ejector - Ejection: one-way Dkjdpfx Aezhnwdodreu UNIVERSAL CONVEYOR BELT UTV-200/1500: with additional adapter Connection voltage: 1 x 230 V AC Connection power: 0.5 kW Rated connection frequency: 50 Hz Length: 1500 mm Width: 200 mm

Condition: new, Automation cabinet, control system cabinet, switchgear cabinet, Siemens SPPA - T2000 Control system and cabinet design Siemens switchgear cabinet, SPPA - T2000 AS 620B R903, Siemens 8 MF cabinet SPPA FUM R standard cabinet 6DP2623-1GG10-0XX0-Z Switchgear cabinet, Siemens sppa-t2000 8 MF cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross connection Component set for earthquake reinforcement, front and rear Double doors 2 x partition Transporting eyelets Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Degree of protection IEC60529: IP20 Dkjdpetzbdkjfx Adrou Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central section module carrier: 1 x reduced AP FUM-B-BGT: 3 x EU 903 module carrier with 2 x Profibus connection IM616 and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 switchgear cabinet, Siemens Module designation Fum210/6DP1210-8BC Teleperm XP binary module Profibus connection interface module IM616 6DP1616-8BA More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, working direction: left-right Dkjdpfx Adjz Ia Sworou

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Dedpfx Aov Ivnzsdreku Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dksdpfov Ivn Uex Adrju Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The angle conveyor from M-Fördertechnik is available for sale; features cycle control. Speed: 4 m/min. Infeed height: 1700 mm. Inclined belt: 1200 mm. Usable width: 300 mm. Total width: 450 mm. Mobile. Cleat height: 50 mm, every 520 mm. Djdeyntxzepfx Adroku

Condition: good (used), ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Rod circumference: 28 cm Diameter: 8.90 cm Dkodpfxshtyxls Adrou The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more new and used items in our shop! International shipping costs available upon request!