Used Lotus Laser Systems Fiber Laser for sale (41,919)

Condition: used, Year of construction: 2018, machine/vehicle number: 1803006, with extraction system, manufactured by LOTUS LASER SYSTEMS, and an additional pre-filter extraction system, type: VACUAIR UML 350, in new condition. Ibodpfx Ansz Nhr As Ijc

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) Iedpfxszgci Eo An Iobc We will be happy to answer any further questions you may have by telephone.

Condition: used, Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064 nm Minimum power: 5 W Maximum regulated power: 550 W Ijdpfozdrwgox An Ijbc Beam parameter product: 25 mm-mrad External dimensions: Width 1250 mm, Height 1580 mm, Depth 720 mm Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pole, 63 A, 6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with two hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 V ± 10 %, 3P + PE, 60 Hz Scope of delivery: (Laser system, laser head, and replacement cable…) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, IPG Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processing heads Independent power control via fieldbus interface Extended IPG power supply with integrated safety features Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA Year of manufacture: 2011, Serial number: 11101050 Iodpfx Aezg Evuon Iebc RIEDEL PC 250.01-NZ-DIS Chiller Refrigerant: R407c, Power connection: 40/42.5A Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), FOBA DP 15 Laser Marking System The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics using the "all-purpose laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-purpose laser" for marking industrial products. It is ideally suited for metals and a wide range of plastics. Ibodpfxow U T Ebj An Ioc The technology enables permanent, easily readable, and precise marking. Mode of operation: The laser beam creates a focused light spot that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) More new and used items can be found in our shop! International shipping costs available upon request!

Condition: used, TRUMPF Mobile Laser Marking System / Mobile Laser Marker TRUMPF TruMark 5010 Mobile Marker Mobile fiber laser marking system with a hand-held processing unit For sale is a used mobile laser marking system from the manufacturer TRUMPF. The system is suitable for the permanent marking of metallic components, for texts, barcodes, Data-Matrix codes, graphics, and logos, as well as for industrial applications in production and quality assurance. Technical data: Manufacturer: TRUMPF Laser Marking Systems AG Type: TruMark 5010 Mobile Marker Device type: Mobile laser marking system / Fiber laser Year of construction: 2014 Iedpfxsz Eh Eye An Isbc Laser medium: Yb:Fiber Wavelength: 1062 ± 3 nm Pulse repetition frequency: 1–200 kHz Pulse duration: 250 ns Max. Marking area size: 50 × 30 mm² Min. Focal diameter: 70 µm Beam quality M²: < 1.6 Electrical connection: 100–230 V / 50–60 Hz Power consumption: 2.5 / 5 A Power rating according to nameplate: 600 W Typical power consumption at rated power: 210 W Protection class: IP40 Dimensions: 460 × 1200 × 980 mm (W × H × D) Weight: 90 kg Processing unit: Dimensions: 190 × 320 × 490 mm (W × H × D) Weight: 5 kg Length of connecting hose: 1.7 m Laser safety class: 1 for metallic workpieces Extraction: integrated Equipment: Hand-held laser processing unit Mobile chassis Integrated touch display Integrated extraction Yb:Fiber laser TruTops Mark operating/marking software Connecting hose Original TRUMPF product documentation Accessories as shown in the pictures Application areas: Laser marking of metallic components Component marking Traceability Static and variable texts Barcodes Data-Matrix codes Graphics and logos Prototype construction Sheet metal fabrication Automotive industry Aerospace industry Scope of delivery: 1 × TRUMPF TruMark 5010 Mobile Marker Hand-held processing unit Touch display Integrated extraction TRUMPF product documentation Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Iedpfx Anjy Nwtye Ijbc Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: used, ACSYS Ijdpfeyi Twgsx An Isbc Type: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of manufacture 2020 For sale is a high-quality ACSYS laser processing system, type BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in very good condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2 × 70 W) and is ideally suited for series production, industrial marking, engravings, labeling, and the processing of complex components. Thanks to its stable granite axis construction and enclosed safety cabinet, the machine operates extremely precisely, reliably, and safely (Laser Class 1). Ideal for industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and more. What the machine can do: High-precision laser engraving and laser marking on metal and many materials Series marking, nameplates, QR/DataMatrix codes, logos, numbering Processing of large layouts without distortion (Large Field Removal Option) 3D component processing possible Camera positioning system for exact workpiece alignment Automated processes / industrial integration possible (PLC, network, USB) Low-maintenance, air-cooled fiber lasers with a long service life Enclosed, safe industrial system (Laser Class 1) Equipment / Options: Camera system LAS – Live Adjust System HD Large Field Removal (LFR) – Processing of large fields without distortion Industrial PC control with ACSYS software suite Network / USB / PLC connection Automatic door & safety monitoring Lighting & signal light Climate-controlled control cabinet Extraction and filter system for laser fumes Extraction and filter system (ULT LAS 1500) Volume flow max.: 3,240 m³/h Nominal volume flow: 1,200 m³/h Negative pressure max.: 3,450 Pa Power: approx. 2.2 kW Weight: approx. 300 kg Technical data: Machine Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) Type: BARRACUDA® Custom Dual FL70S Year of manufacture: 04/2020 Laser: 2 × Fiber laser, 70 watts each (air-cooled) Wavelength: 1055 – 1070 nm Processing field: approx. 570 × 570 mm Axis travel: X: approx. 875 mm Y: approx. 600 mm Z: approx. 190 mm Electrical data: Connection: 3AC / N / PE 400 V Frequency: 50 Hz Power consumption: approx. 5.5 kW Dimensions & Weight: Cabinet width: approx. 2050 mm Cabinet height: approx. 2300 mm (with signal light approx. 2600 mm) Cabinet depth: approx. 2850 mm Machine weight complete: approx. 3,800 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Ibjdpfx Ajkdnv Ton Isc Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Year of construction: 2013, condition: excellent (used), functionality: fully functional, HIGHLIGHTS - camera system connected to a 19" screen for monitoring the cabin - interchangeable pallet table allows loading and unloading of the machine outside the working area - compact design - smoothing function for small holes and cut-outs for better cutting quality - complete databases for cutting technologies - CAM CONCEPT FINEST Professional software - Significantly lower maintenance costs compared to CO2 laser technology TECHNICAL DETAILS Ibedpjl D Rp Tsfx An Isc sheet size: 3000 x 1500 mm positioning speed up to 100m/min positioning accuracy +/- 0.03 mm laser source: 2,0 kW cutting capacity steel: max. 17 / 14 mm cutting capacity stainless steel: max. 10 / 5 mm cutting capacity aluminum: max. 8 / 6 mm Cutting power: max. 6 / 5 mm Cabin: with sliding door; complies with laser protection class 1 Control system: ECK-827 (based on Windows XP), multi-process control system Control connections: 2 LCD displays, 4 USB ports, LAN adapter Control functions: simple and intuitive software, diagnostics of machine operation, advanced functions such as scaling, rotation, mirror image of cutouts, database of cutouts, complete databases for cutting technologies Software: CAM CONCEPT FINEST Professional (automation/NC programs, many data interfaces, cutting optimization) Laser source: fiber laser source from the company IPG (Ytterbium Laser YLS 2000) Special features: Fiber optic conduction of the laser beam, low power consumption, low cost of cooling, life expectancy of the source up to approx. 100,000 hrs. Cutting head: PRECITEK Functions: Anti-collision system, error recording system, function of precise positioning, enables quick change of focal length. pallet table: 2 pieces Filter system: noise level

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Date of manufacture - 2019. The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Iodpfezyu Igjx An Iebc Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: new, Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: Available for order (delivery time 6-8 weeks) Working area X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 25 mm Sheet thickness, stainless steel: 15 mm Sheet thickness, aluminum: 20 mm Sheet size: 3048x1524 mm Load weight: 200 kg/m² Speeds, X-Y axes: 100 m/min. Speeds, X-Y axes, simultaneous: 280 m/min. Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Isdpfjfkpamox An Isbc Positioning laser diode Central lubrication system Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer recognition and measurement Pierceline Focusline

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Ibsdpfxjzdqkrs An Ijc Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Ibodpfx Asycf N Ijn Iec

Condition: used, Ytterbium Fiber Laser Ijdpfszdrw Hsx An Ijbc Type: YLR-2400 S2-WW Description: Laser module (IPG YLR-2400 S2-WW fiber laser with cooling) Year of manufacture: 2017, Serial number: 7121450 Laser power: 2.4 kW Laser structuring system, cooling unit KKW; without 3D scanning head and without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: unexamined, Year of construction: 2019, Sales Description – Salvagnini L5 Fiber Laser System (3 kW) Our company is offering for sale a Salvagnini L5 fiber laser system from our company inventory, to be dismantled by the buyer. See pictures for the overall system. Iodpfx Ajyg H Rzon Isbc Technical Data (as per type/indications): Manufacturer: Salvagnini Model: L5 Fiber Laser Power: 3 kW Maximum sheet size: 1,500 × 3,000 mm Condition & Notes: Used machine The system was last out of operation Completeness cannot be guaranteed Functionality has not been tested – no assurance provided Sale as inspected This system is suitable for professional businesses with the appropriate infrastructure, for recommissioning, refurbishment, or for spare parts recovery. Company sale – sold without any warranty, guarantee or returns.

Condition: used, Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Ibedpfx Anozh Dn Eo Isc Precision optics: F-Theta lens, high-speed scanner The system has been upgraded with a Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler, and software Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1998, condition: used, machine/vehicle number: 9086, This Haas laser marking system, model: Vectormark LBA 303 LM1 SM420(2), will be auctioned online as part of our industrial auction / machine auction, featuring laboratory equipment and machinery, laboratory furnishings, workshop equipment, DIY supplies, storage solutions, technical equipment, and more. Ibsdpfsz Syg Rsx An Ioc You can find this and many other items on our platform.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine Ibedpsz Rl Eiofx An Ijc - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Iedpfoz Rl Taex An Iebc Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: new, functionality: fully functional, Year of construction: 2025, Glorystar Laser ALL NEW Laser Marking Machine | GM | 3-100W To meet various material and precision requirements for laser marking, we offer three options of laser marking machines for you to choose from. They are Fiber Laser Marking Machine, CO2 Laser Marking Machine, and UV Laser Marking Machine.? Laser Type: Fiber Laser Power:20-100W Optional Max. Marking Speed:7000mm/s Marking Range:50m×50mm-300mm×300mm Min.Line Width:0.03mm Min.Character Size:0.3mm Accuracy:±0.01 Dimensions:740mm×1150mm×1500mm Ibedpouc S Iusfx An Ioc Laser Type:CO2 Laser Power:15-55W Optional Max. Marking Speed:5000mm/s Marking Range:30m×30mm-200mm×200mm Min.Line Width:0.1mm Min.Character Size:0.6mm Accuracy:±0.01 Dimensions:740mm×1150mm×1500mm Laser Type:UV Laser Power:3-15W Optional Max. Marking Speed:7000mm/s Marking Range:100mm×100mm-300mm×300mm Min.Line Width:0.012mm Min.Character Size:0.15mm Accuracy:±0.01 Dimensions:1150mm×1190mm×1600mm

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Ibodpfx Anowv U N Ss Iec Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: BECKHOFF, controller model: n/a, overall weight: 35,900 kg, number of axes: 5, This 5-axis NUKON Fiber Laser Extreme 30250 was manufactured in 2021. It features a 12 kW fiber laser, Beckhoff CNC control system, and a maximum sheet size of 2,500 x 12,000 mm. The machine supports speeds up to 50 m/min and includes a servo drive system. Consider the opportunity to buy this NUKON Fiber Laser Extreme 30250 fiber laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Noise emission: 60 db • Control system: beckhoff cnc • Display: 19" tft standard screen • Control console: all functions can be controlled from the panel • Interface: ethernet • Drive type: servo • Repeatability: ± 0. 35 mm (over 500 mm) Ijdpfxjx U Ur Do An Iebc • Rotary axis (rotational axis): 160 rpm • Acceleration (x, y, z): 1. 5 g • Positioning accuracy: ± 0. 35 mm (over 500 mm) Extra Information Machine still under power

Condition: good (used), Trumpf TruMicro 6 kW Laser Source High-performance disc laser with nanosecond pulses. Ibedoxaktlspfx An Isc The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disc laser technology and combine short pulses and high pulse energies, even at high frequencies. This enables you to remove layers and contaminants at maximum speed, reducing your cycle times. Optimize your processes further by varying the repetition rate while maintaining a constant pulse duration. For efficient and economical cleaning of tire molds, the short-pulse lasers of the TruMicro Series 7000 are the ideal tool. Large-area applications with high average power: Removing material, cleaning, tempering: The lasers of the TruMicro Series 7000 demonstrate their full performance in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous material removal rates. A scanner ensures excellent utilization of the power. Flexible laser light cables transport the light where it needs to be, facilitating the integration of the laser. Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System input power: 380–460 VAC, 3 phases Laser power: 750 W Wavelength: 1030 nm Pulse energy: 80 mJ Pulse duration: 30 ns Beam quality: 20 mm Repetition rate: 5 to 100 kHz Fiber diameter: 400 µm IP rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT Bus CNC System, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: 6kW Fiber Laser Source, laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 8 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, workpiece weight (max.): 1,000 kg, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 9,000 kg, total length: 9,000 mm, total width: 3,400 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Metal Technics Polska MTP-FL3015R-6KW Enclosed Fiber Laser with Rotary Axis Manufacturer: Metal Technics Polska Model: MTP-FL3015R-6KW Condition: Brand New / Factory New Laser Power: 6kW (6000W MAX Photonics Fiber Laser) Control System: FSCUT Bus CNC Control System Laser Head: Ospri Intelligent Autofocus Cutting Head Working Area (Sheets): 1500 x 3000 mm Tube Processing: 6000 mm length – Round: Ø20–220 mm – Square: 20x20 to 220x220 mm Ibodoztx Drspfx An Ioc 1. OVERVIEW & CAPABILITIES The MTP-FL3015R-6KW is an industrial fiber laser engineered for high-speed, high-precision processing of sheet metal and structural tubing. Built for demanding production environments across Europe, it combines flat sheet cutting and a 6m pipe rotary axis on a single heavy-duty machine bed. Material Cutting Thickness (6kW): • Carbon Steel: up to 25 mm (O2/N2) • Stainless Steel: up to 16 mm (N2) • Aluminum: up to 14 mm (N2/Air) • Brass: up to 10 mm (N2) 2. CORE CONFIGURATION • Laser Source: 6kW MAX Photonics (high photoelectric efficiency, 100k+ hrs life) • Cutting Head: Ospri with dynamic autofocus & thermal-protected water-cooled optics • CNC Software: FSCUT Bus CNC with integrated automatic nesting, fly-cutting & leapfrog motion • Drives & Motion: Inovance bus servo motors & Techmech precision planetary reducers • Transmission: High-precision linear guide rails & helical rack & pinion • Gas Regulation: Aventics proportional valve for automated O2 pressure control • Chiller Unit: Tongfei dual-circuit industrial water chiller • Safety & Fumes: Full protection enclosure with access interlocks + partitioned zone dust & smoke exhaust 3. MACHINE DIMENSIONS & TRANSPORT LOGISTICS Assembled Working Footprint: • Length: ~9,000 mm (Main cabin + 6,000 mm rotary bed extension) • Width: ~3,400 mm (Main cabin + electrical cabinet + chuck overhang) • Height: ~2,350 mm • Total Weight: ~9,000 kg Transport / Shipping Dimensions (Dismantled for Mega-Trailer / Container): • Main Machine Bed Unit: ~4,500 x 2,250 x 1,950 mm • Rotary Axis Bed Extension: ~6,200 x 850 x 1,200 mm • Ancillary Skid & Enclosure Panels: Standard crated pallets • Required Gateway/Door Access at Buyer Site: Min. 2,500 (W) x 2,200 (H) mm 4. EUROPEAN DELIVERY, WARRANTY & SERVICE • Delivery: Professional logistics arranged across all EU countries & mainland destinations. • Free Installation & Commissioning: On-site leveling, assembly, optical alignment, and software integration performed by Metal Technics Polska field service engineers. • Free Operator Training: Hands-on technical training for machine operators and programmers (software nesting, CNC operation, parameter tuning). • Warranty: 12-month full warranty on all mechanical, electronic, and optical component parts. • Service Support: Direct factory technical support, rapid spare parts dispatch, remote online diagnostics, and complete post-warranty service programs provided directly by Metal Technics Polska. Power Supply: 3-Phase 380V / 50Hz Branding: Custom Metal Technics Polska (MTP) industrial colors & livery.