Used Lu-Ve Eav80-90 for sale (18,810)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 245988600001002, nominal power: 378.4 kW (514.48 HP), total length: 6,900 mm, total width: 1,100 mm, total height: 2,300 mm, type of cooling: air, Brand new Lu-ve EAV80-90 air-cooled condenser for Freon. We can supply this condenser with matching fans. The condenser block has minor transport damage. The condenser has a capacity of 378.4 kW at an air flow rate of 80,000 m³/h. Specifications: Brand: Lu-Ve Model: EAV80-90 Product type: air-cooled condenser Podpfx Aqex A Ta Tjljgr Capacity: 378.4 kW (based on an air flow of 80,000 m³/h) Number of fans: 6 Refrigerant: Freon Surface area: 716.1 m² Dimensions: 6900x1100x2300 mm (LxWxH) Weight: 1047 kg Year of manufacture: 2024

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis – Haulage Semi-Trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Mounting position for warning boards at the rear - Outer frame with "Load-Lock-Profil" for lashing strap attachment - 24 t twin-speed landing legs, single-side operation - Ferry lashing eyes, marked yellow, incl. 2 at the rear as tow eyes - Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers - Stake pockets recessed in the outer frame, 80 x 80 mm internal size - Stake pockets recessed centrally in the floor, 80 x 80 mm internal size - Removable stakes W=80/D=80/L=1200 mm, hot-dip galvanised - Lashing rings recessed in the outer frame, 5 t each - 2 tool boxes, W approx. 1230 / H approx. 450 mm, enclosed, fitted across the full width ahead of the axles in place of side underrun protection, foremost lock insertable as pin type - Cross lashing/stake rails recessed in the floor across the full width to the outer frame, approx. 100 mm high, with 20 mm round steel bars top and bottom, spacing approx. 60 mm, closed at the bottom with an angle plate, open downward on one half, for lashing and inserting 80 x 80 mm stakes - Open compartment for warning boards, subject to technical feasibility #Axles + Suspension - SAF disc-brake axles, laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption - Air suspension - 1st axle automatic lift axle, incl. forced lowering and start-off aid, activated by braking 3 times - 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm #Braking System - Two-line air braking system - Colour-coded pipework for easy servicing - Spring-brake parking brake - 2 anti-mismatch coupling heads at the front - EBS electronic braking system with EBS socket at the front Pjdpjzb Iu Dofx Aqlsgr - Lift-and-lower valve - Vehicle stability system #Wheels and Tyres - 385/65 R 22.5", steel wheels, factory silver #Electrics - 24 volt - 4 x three-chamber lights, side-mounted yellow LED lighting - 2 white LED front position lights - 2 white/red LED outline marker lights at the rear - 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front, without connecting cable - Beacon light with bracket, switched via side lights (lamp removable) - 2 pairs of warning boards, double LED-illuminated, extendable to 4500 mm and removable via plug connector, with additional bracket at the rear - Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor - Screen-printed plywood flooring approx. 30 mm thick, cross joints with omega insert, on longitudinal bearers for high point-load capacity, forklift axle load up to 7100 kg max. #Front Wall / Front Corner Posts - 25 mm aluminium hollow profile, 1650 mm high - Corner posts in solid steel design - Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel - "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high - Storage compartment for 80 x 80 mm removable stakes inside the front wall

Condition: ready for operation (used), Heidenhain UV 140 power supply unit ID 335 009-01 SN 8657728B. The item has been completely overhauled and comes with a 3-month warranty. Professionally fully refurbished and tested, in good preserved condition, 100% functional. Scope of delivery as shown in the photos. Pjdjx Etpcepfx Aqlogr

Condition: ready for operation (used), Fanuc A14B-0082-B209-02 Laser power supply with fan SN: P96P09092,used, good condition, 100% functional, scope of delivery according to photos Pgjdpsmq H Tbofx Aqljr

Condition: used, Included in the scope of delivery: 1x load distribution plate, used Material color: Sendzimir galvanized Suitable for manufacturer: Dexion Suitable for shelf depth: 800 mm Overall length: approx. 980 mm C-profile dimensions: 185 x 65 x 35 mm Material thickness: approx. 4.00 mm Weight per piece: approx. 10.07 kg Opening for shelf feet: approx. 115 mm The load distributors are suitable for distributing the load over a larger total area. General information about the item: Podpfjdvad Eex Aqlsgr This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2004, condition: excellent (used), The complete line includes: Podpjgcvc Tofx Aqljgr 1. GUSBI – 24 Station rotary table with PU ( polyurethane ) robot applicator. Brand : GUSBI Italy Model : PF24 Serial no. 4625 Year of production : 2004 Number of station : 24 Size of each station : 600mm x 500mm Power – 30 KW Pneumatic – 500nl/min by 8bar Output / shift 8h – 2.000 – 3.500 pcs. – depends on size and quantity filter on each station 2. Automatic Rotary Pleating Machine Brand : SAS Italy Model: PANELFILTER Type : 350/190 Power – 3,5 KW Pneumatic – 6 bar – minimal consumption Year of production 2004 No. of rotary rollers / blades / sets – 8 pcs. - pleat height 20mm - pleat height 28mm - pleat height 32mm - pleat height 36mm - pleat height 38mm - pleat height 40mm - pleat height 48mm - pleat height 53mm - pleat height 60mm Machine is design ready for trapezoidal pleat pack. 3. Hot Melt dispenser / applicator : Brand : NORDSON USA Type : VA 025-4FFXX4, 400V Model : Versa Blue 8036-189 Serial no. LU04B01511 Year of production 2004 Tank size for HM : 50kg No of heads – 3 Power - 11 KW Pneumatic – 6 bar – minimal consumption 4. Aluminium moulds - 131 pcs. for 100 types of diffrent automotive air panel filters. Additional we offer transfer of know how & trainning.

Condition: used, Year of construction: 2012, Blume transfer roller conveyor slider 90° 1880-610-580 Pgedpfx Asra Hp Roqlor RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Pjdov S H N Rjpfx Aqlsgr

Condition: used, Year of construction: 2025, operating hours: 80 h, Demonstration machine prototype, available immediately: RENNER RSF REvolution 90 D - (5 to 13 bar) frequency-controlled, direct-drive screw compressor with RENNERtronic Plus Touch control with adjustable pressure range from 5 to 13 bar Operating hours: approx. 80 hours Year of manufacture: 2025 Pressure: 6 to 13 bar Rated power: 250 kW Delivery volume: at 5 bar: 6.52 to 17.17 m³/min at 6 bar: 6.50 to 17.11 m³/min at 7 bar: 6.47 to 17.02 m³/min Pgjdjxpwxyspfx Aqljr at 8 bar: 6.44 to 15.88 m³/min at 9 bar: 6.39 to 15.10 m³/min at 10 bar: 6.32 to 14.25 m³/min at 13 bar: 6.05 to 11.61 m³/min Noise level: 74 dB(A) Dimensions length x width x height: 1997 x 1493 x 1801 mm Weight: 2850 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.able.

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm Pgjdpfedx R Tfsx Aqlor - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard equipment includes all safety fittings and an electrical connection cable with plug and Condor pressure switch Compressed air tank equipped with a safety valve, tank pressure gauge, and condensate drain valve The welded-on rear handle improves loading and transport capabilities Fully automatic operation via a pressure switch with start-up relief, motor protection, and on/off switch Featuring enhanced equipment for universal use With V-belt drive, 2 cylinders in an in-line arrangement for particularly smooth operation, and a 400 V three-phase motor with external motor protection Low compressor speed – this protects the compressor components, reduces noise levels, and minimizes vibrations Large fan impeller for optimal cooling Including filter pressure regulator for regulated compressed air that is free of condensate, dirt, and oil With a 2 m device connection cable with rubber sheathing and an air outlet via a quick-release coupling Device connection cable with phase inverter 10-year warranty on the tank against rust Podpfxebyhvro Aqlsgr Technical data Pressure: 10 bar Intake capacity: 510 l/min Delivery capacity: 390 l/min Speed: 1240 min-1 Tank volume: 90 l Weight: 80 kg Noise: 97 dB(A) Dimensions (W x D x H): 1070 x 495 x 895 mm Drive power: 3.0 kW Voltage: 400 V Location: In stock at Bitburg warehouse Subject to prior sale.

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Pgsdpfohk Dfkex Aqler Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Pgedpfx Aqeyk Tfyeler

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Pgodpfeyk Tmqox Aqler

Year of construction: 2004, condition: defective spare-parts repository (used), Manufacturer: Wittmann Pjdpfx Aqjyk Tnnjlogr Model: TP-PLUS-2:90 Incomplete

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Podpfxsyk Uwke Aqlegr

Year of construction: 2008, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Pedpeyk Uvmefx Aqlegr

Condition: ready for operation (used), Year of construction: 2007, Manufacturer: Wittmann Model: TP-PLUS-2:90 Pedsyk Uiyopfx Aqlsgr

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm Pgedpjyw Hwkofx Aqler -Number: 2x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, conveyor belt width: 1,330 mm, total width: 1,550 mm, inner radius: 970 mm, power: 1.1 kW (1.50 HP), motor manufacturer: SEW, Equipment: type plate available, Belt Curve Conveyor / 90 Degree Curve Conveyor Manufacturer: Vanderlande Year of Manufacture: 02/2023 Condition: As new Model/Type: Belt with grip surface Total Outer Length: approx. 3200 mm Total Inner Length: approx. 1520 mm Total Width incl. Motor: approx. 1550 mm Total Width without Motor: approx. 1330 mm Conveyor Width: approx. 1000 mm Inner Radius: approx. 970 mm Material: Steel Pgjdpfxoygmy Nj Aqljr Colour: Blue / Dark grey Including frame: approx. 300 mm high Including SEW motor (1.1 kW) Stock: 5 units Price per unit Internal Article Number: 2026020204 Thanks to the outstanding quality of the conveyor technology, your material is conveyed smoothly to its destination, even under heavy load. Tailored solutions for your intralogistics needs. We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a customised quotation or advise you on concept development or installation. Simply tell us about your requirements and on-site conditions. Take advantage of our many years of experience and excellent network of professionals. We have successfully completed projects for companies in various industries such as logistics, pharmaceuticals, trade, electronics, and more. Together, we will find cost-effective, sustainable ways to optimise your processes and material flow. We can even offer fully automated sorting systems or additional components like order picking racks or containers. Features: Condition: Fully operational, with signs of use Ideal for fast material handling Professionally dismantled and packaged Pickup Address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, Roller Conveyor Curve / 90-Degree Curve Manufacturer: Soco System Condition: Used Model: Roller Type: 90° Total outside width: approx. 1430 mm Total inside width: approx. 820 mm Total width incl. motor: approx. 580 mm Conveying width: approx. 410 mm Roller pitch: approx. 60 mm Axle spacing: approx. 110 mm Roller type: Plastic Material: Steel/Plastic Color: Galvanized, Light Grey, Orange Includes 2 Soco 0.12 kW motors Stock quantity: 4 units Price per unit The conveyor system was fully operational until disassembly. Condition: Fully functional, with signs of use Ideal for fast material handling Internal item number: 2026020302 Pickup address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your materials will glide smoothly to their destination—even under heavy loads. Tailor-made solutions for your intralogistics Pgedjygyhaepfx Aqlsr For roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your experienced partner! We are happy to provide you with a customized quote or advise you regarding concepts or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have already successfully completed projects for companies in various sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will work to optimize your operations and material flow efficiently and sustainably. We can also offer fully automated sorting technology and additional components such as picking shelves or containers.

Condition: used, Year of construction: 2009, functionality: fully functional, Equipment: type plate available, Roller Conveyor / 90-Degree Roller Conveyor Curve Pedpfoyt I R Njx Aqlegr Manufacturer: Costo Year of manufacture: 2009 Condition: Used Model: 90-degree curve Total outside width: approx. 2250 mm Total inside width: approx. 1140 mm Overall width: approx. 800 mm Conveying width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Available stock: 2 units Price per unit Condition: Fully functional, with signs of wear Feet must be ordered separately Material: Steel Ideal for fast material handling Professionally dismantled and packed Internal item number: 2026031202 The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be happy to provide you with a tailored offer or advise you on layout and assembly. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and our outstanding network of experts. We have already successfully completed projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will develop solutions to optimize your workflow and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or additional components such as order picking racks or containers.

Condition: ready for operation (used), Seidel 66WKS-P310/90-B - 66WKS-P310/90-B servo amplifier, 28 kVA, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pgedei Ec S Ujpfx Aqljr

Condition: ready for operation (used), Seidel 4K-P240/90-B power supply, serial number as shown in the photo, used, with normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Podpei Ec N Djfx Aqlsgr

Condition: ready for operation (used), Seidel 66WKS-P310/90-B - 66WKS-P310/90-B Servo amplifier, 28 KVA, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Podpei Ec S Refx Aqlegr