Used Lucoma Ventilation Duct Ventilation Flap for sale (5,248)

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper Itjdsfkzbaspfx Ag Aon -Lucoma: Pressure relief valve DRK 370 x 405 mm -Dimensions: 370/405/165 mm -Weight: 5.3 kg

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Itodpefccuzofx Ag Ajn -Outer frame: made of galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Ijdpod A U Rkjfx Ag Aetn -Outer frame made of: galvanized sheet steel -Dimensions: 1575/1275/H175 mm -Weight: 50 kg

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm Isdpfjharupox Ag Aotn -Weight: 21 kg

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: flange ring -Inside: Ø 257 mm -Flange: bolt circle Ø 285 x 6 mm -Number: 34x flange ring available -Price: per piece / minimum order 2 pieces -Dimensions: Ø 307 x 4 mm Isdpfowb Sc Tex Ag Aetn -Weight: 0.7 kg/piece

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg Iedpfx Asit Rmmog Aetn

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle - flexible connection -Handover: in its current condition as inspected -Seal: damaged, see photos -Ventilation duct: Adapter with elastic connection -Opening: 925 x 855 mm / 750 x 750 mm -Height: 355 mm -Transport dimensions: 925/855/H355 mm -Weight: 18 kg Ijdpfx Agozxyvgs Aetn

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flap, non-return flap, lamellar fan -Ventilation damper: louvered louvre damper -Type: 7 mechanically adjustable slats, without drive -Number: 4x ventilation flap available -Price per piece Itodpfxsmxputo Ag Aen -Total dimensions: 1240/1240/80 mm -Weight: 40 kg/pc.

Condition: excellent (used), 457 USED Ventilation, ventilation ducts, and air exchange in a bread cooling room. The device is used to cool bread and exchange air in a bread cooling room. DIMENSIONS OF THE ROOM IN WHICH IT WAS OPERATED (in cm): - W: 820, - L: 1300, Iodpfx Aozlnhqog Aotn - H: 430. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: used, Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available Iedpjgua Htjfx Ag Astn -Price per piece -Weight: 1.5 kg / pc.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Ijdpfjzt Ni Ejx Ag Aotn Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm Isdpfjffphcex Ag Aetn -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm Iedpfx Aeffphbeg Astn -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Condition: used, Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation damper: louvered louvre damper -Type: 9 adjustable slats -Material: aluminum -Total dimensions: 445/100/H330 mm Itodpfxei Exqmo Ag Ajn -Weight: 2.6 kg

Condition: used, Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm/405 x 305, Ø 250 mm -Material: sheet steel -Dimensions: 1255/440/500 mm Iedpfx Agod I Eqko Ajtn -Weight: 30 kg

Condition: used, Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Ijdped I Eqisfx Ag Aetn -Connection: 460 x 400 mm -Material: sheet steel -Dimensions: 765/440/H630 mm -Weight: 12 kg

Condition: used, Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm Itsdjcba Tvepfx Ag Asn -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings Itsdpfx Aocba T Aog Ajn -Connection: 550 x 450 mm -Connection: Ø 515 mm -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet Itedpfx Aocba T Djg Ajn -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. Itjdpfxjzx Rz Hs Ag Ajn We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: excellent (used), Huber & Ranner Air Handling Unit (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was used as a recirculating air unit for a paint booth and is in excellent, clean, and professionally maintained overall condition. The system controls the complete air climate (filtration, cooling, humidification, and air supply) and is ideally suited for production halls, paint shops, wood or metal processing, and large-scale industrial projects. Technical data of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System Reference: SPK ULA) Itodpfszrmctsx Ag Aen Order Number: 19 0090 Z / P.010 Volume Flow / Air Capacity: 31,000 m³/h The modular components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: CU / AL (copper/aluminum) Refrigerant: R134a Highly efficient filter stage: Filter class: F9 / Standard (fine dust filter for the highest air purity) Filter type: TM 9U635A10-1 (Quantity: 9 pieces) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise regulation of humidity, including an integrated droplet separator to prevent moisture transfer into the air duct. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Itjdozmaqaspfx Ag Ajn Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020012.010, total height: 870 mm, total width: 750 mm, total length: 1,400 mm, Equipment: documentation/manual, COMMERCIAL SALE As part of the liquidation of a company, we are selling the following used packaging machines. All machines offered are fully functional and were used in ongoing operations until recently. If you have any questions about the individual machines, possible combinations, or further details, please do not hesitate to contact us. Delivery and collection are possible by arrangement. Location: 41564 Kaarst-Holzbüttgen 1. & 2. Simons+Harren carton sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1x manufactured in 2020 - 1x manufactured in 2018 Technical data (both machines): - Operation: manual / pneumatic, 230 V - Sealing: Tesa adhesive tape - Dimensions: L 1,160 x W 970 x H 750 mm - Carton sizes approx.: L 150–∞ x W 120–470 x H 120–450 mm Price, manufactured in 2020: 3,000 EUR net Price, manufactured in 2018: 2,500 EUR net 3. Youngsunpack carton sealer MHFJ1AB (2013) Semi-automatic, 230 V, Tesa adhesive tape Dimensions: L 1,100 x W 770 x H 700 mm Iedpfx Agez S Hwvo Astn Carton sizes approx.: L 150–∞ x W 120–480 x H 120–480 mm Price: 1,000 EUR net 4. Heripack HV-TX52.B (2018) Semi-automatic carton sealer / bottom closing machine 230 V, Tesa adhesive tape, automatic format adjustment Dimensions: L 1,400 x W 750 x H 870 mm Price: 2,700 EUR net 5. Simons+Harren bottom flap folding machine CF-10T (2017) Pneumatic side gusset folding machine Dimensions: L 1,400 x W 750 x H 870 mm Carton sizes: L 200–600 x W 150–480 x H 120–500 mm Price: 1,700 EUR net 6. Heripack bottom flap folding machine HB-Sonder (2020) Pneumatic/electric, side gusset folding machine Optimized for combination with item 4 (HV-TX52.B) Dimensions: L 1,650 x W 740 x H 750 mm Carton sizes approx.: L 150–800 x W 110–400 x H from 90 mm Price: 2,500 EUR net (Particularly attractive as a set with HV-TX52.B) All machines are available individually.

Year of construction: 2026, condition: as good as new (ex-display), ADL AUTOMATIC LINE FOR THE PRODUCTION OF VENTILATION DUCTS So that the rectangular section ventilation duct machine is able to produce flat plates and U-shaped and L-shaped pieces without the need for additional use. It can also produce one type of Pittsburgh L-shape Auto Duct. Previously it is equipped with Servo Motor and Servo Reducer, which avoids making errors in measurements. The bender and guillotine are driven by a hydraulic system. Possibility to choose Z-type or trapezoidal ribbing or both in one machine. Itedpfxsfwmqvj Ag Aen Technical Specifications Range of processed sheets: Min: 0.5mm - Max: 1.5mm Minimum sewerage: 100x100mm Dimensions: W 2,000mm x D 2,000mm x H 1,500mm Weight: 3,000 kg Power: 2.2 kW servo motor

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA - Double-sided profiling machine - length of the profile 180 – 850mm - width of the profile 30 – 75mm - thickness of the profile 10 – 45mm - spindle diameter 30mm - max. disc diameter 250mm - 4 discs in a set 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of the dust extraction nozzle 5x100mm - dimensions L/W/H 1900x2230x1530mm DDGA - Four-sided planing machine - width of the workpiece 35 – 130mm - thickness of the workpiece 10-60mm - min. length of the workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of the chain via oil pump - diameter of the dust extraction nozzle 4x120mm - dimensions L/W/H 3200x1370x1830mm DBCA - Profiling machine feeder - max. feed rate 40m/min - max. width of the profile 150mm - motor 0.55kW - overall dimensions L/W/H 2320x600x1150 DBGA - Moulding machine feeder - length of the mouldings 200-600mm - width of the mouldings 30-20mm - thickness of the mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions L/W/H 1500x500x980mm - total weight approximately 4900kg Net price: 63900 PLN Itsdpfezkt Rzox Ag Ajn Net price: 14860EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell goods that the manufacturer has previously introduced to the market. We have no business relationship with the manufacturer.