Used Müga Vertical Milling Center for sale (23,020)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Hjdpfxetrhq Hs Ab Nenl Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Hnedpfx Absw Nklhs Nel Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 2011, x-travel 2600 mm y-travel 1100 mm z-travel 900 mm Hnsdpfxsy Sbl Se Ab Njl control Heidenhain 530 weight of the machine ca. 25050 kg

Condition: used, x-travel 800 mm y-travel 510 mm z-travel 500 mm control Heidenhain TNC 370 weight of the machine ca. 3600 kg Hnodpfey Sbl Eex Ab Nel

Condition: used, Year of construction: 2012, x-travel 1067 mm Hjdpsy Sbllefx Ab Njnl y-travel 610 mm z-travel 610 mm control WinMax (max4) weight of the machine ca. 6350 kg

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 510 mm z-travel 500 mm Hnjdpfxey Sblfs Ab Nsl control Heidenhain TNC410 weight of the machine ca. 3600 kg

Condition: new, Year of construction: 2023, 1050 mm 600 mm 600 mm 1200x600 mm ISO 40 Hjdowp Tf Sjpfx Ab Njnl 10.000 U/min

Condition: new, Year of construction: 2023, 1050 mm 600 mm 600 mm 1200x600 mm ISO 40 12.000 U/min Hedpfewp Tb Tsx Ab Nenl Motor Capacity 7,0/10,5 kW

Condition: new, Year of construction: 2026, 1100 mm 650 mm 610 mm Hnedsx Urtxjpfx Ab Nsl 1200x6000 mm BBT 40 12.000 U/min Motor Capacity 7,5/11 kW max. table load 1300 kg

Condition: new, Year of construction: 2026, 0550 mm 410 mm 480 mm 650x410 mm BBT 40 Hnjdpex Urt Eefx Ab Nsl 10.000 U/min Motor Capacity 7,5/11 kW max. table load 500 kg

Condition: new, Year of construction: 2026, 0760 mm 450 mm 500 mm 900x450 mm BBT 40 10.000 U/min Hnedpfx Abjx Urt Ss Njl Motor Capacity 7,5/11 kW max. table load 850 kg

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H Hodpfey Rakkjx Ab Nonl table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2013, x-travel 500 mm Hnodpfx Aoy Nn Dvsb Njl y-travel 400 mm z-travel 330 mm weight of the machine ca. 2100 kg

Condition: used, Year of construction: 2021, x-travel 1270 mm y-travel 660 mm z-travel 610 mm Hedpoy Nfabefx Ab Nsnl weight of the machine ca. 8680 kg

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm z-travel 375 mm Hsdpfxoy Nd U Re Ab Nenl weight of the machine ca. 7150 kg

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) Hnjdpey N Du Dsfx Ab Nel - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg Hedpjx Nqu Dsfx Ab Njnl internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: electron. hand panel, chip conveyor,coolant

Condition: good (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, CNC control Heidenhain iTNC530 24-fold automatic tool changer electronical handwheel chip conveyor coolant through spindle device Technische Daten / technical details: X-Weg / X-travel 860 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 600 mm Spindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/min Tischaufspannfläche / table clamping area 1000x560 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Hsdpoy Hqmhofx Ab Nonl Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Hsdpfx Abey H Igrs Nenl Video of machine in operation available

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm Control Roeders RFM 600 DS Hnodpfx Abey Ez Efs Njl table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 number of tool places 20 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Hsdpfx Abjy Dvnxs Nsnl if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 800 mm y-travel 600 mm z-travel 500 mm Hsdpfx Aoy Ay Itjb Njnl control Heidenhain iTNC 530 weight of the machine ca. 8300 kg

Condition: used, Year of construction: 2018, x-travel 1300 mm y-travel 670 mm z-travel 625 mm Hedpfx Absy Aphco Nsnl control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2008, x-travel 1800 mm Hodpfx Aexuv Sveb Njnl y-travel 510 mm z-travel 480 mm weight of the machine ca. 5500 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, CNC control Heidenhain TNC 426 24-fold automatic tool changer handwheel chip conveyor Hjdpoy Dqxfsfx Ab Njnl coolant device Technische Daten / technical details: X-Weg / X-travel 630 mm Y-Weg / Y-travel 500 mm Z-Weg / Z-travel 500 mm Spindelaufnahme / spindle taper BT 40 Drehzahlbereich / spindle speed 0-8000 UpM /rpm Vorschubbereich / feed range 1-30000 mm/min Eilgang / rapid feed 30 m/min Tischaufspannfläche / table clamping area 800x500 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung / drive capacity 30 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.