Used Mütek Briquetting Press for sale (12,538)

Condition: reconditioned (used), Year of construction: 2023, Special price for a machine with low usage Base machine: €29,990 net Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Lrodpfxod N Dnho Agret Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level sensor: yes . Requirements for the raw material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on the agitator: 150 kg - The feed must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Due to warehouse clearance and inventory reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press / Chip press Manufacturer: RSN Type: ECO Motor power: 5.5 kW Briquet diameter: approx. 60 mm Year of manufacture: 1987 Dimensions: approx. 235 cm x 130 cm x 113 cm The machine has been stored in my warehouse for some time. It was once taken in as part of a trade-in, but there was never enough time to assemble and inspect the machine. Sale is exclusively as a defective parts machine or for refurbishment by hobbyists. Any defects cannot be ruled out. Visually, the machine appears to be complete. No parts are missing. (See pictures. A prior inspection is highly recommended; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading and packaging can be arranged by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options, so please inquire. The stated selling price is the net price plus VAT. An invoice with VAT breakdown will be issued. Lrodpoz Efvcjfx Agrst Warranty basis: due to age and wear, the sale is exclusively to business customers without warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty period is 12 months.

Condition: defective spare-parts repository (used), functionality: not functional, Due to warehouse clearance and stock reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquette press / briquetting press / metal press Briquette press for compacting metal chips, wood chips, etc. No. 5 Manufacturer: COMAFER Type: Metapress 400 Briquette diameter approx. 70 mm Briquette length approx. 60-100 mm Motor power approx. 22 kW The machine comes from a batch of such presses. Another identical machine is still available. The sale is expressly as defective, as a source of spare parts, or for rebuilding by hobbyists for export, etc. Various spare parts for this machine type are still in stock. If both machines are purchased as a package, the spare parts can be included. Condition: see pictures. (See pictures – a prior inspection is expressly desired; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale.) All information without guarantee. The machines can be picked up by the buyer or shipped via freight forwarder at the buyer’s expense. Loading and/or packaging can be organized by us. The shipping costs are an estimate; depending on the distance and unloading possibilities, these may vary; please inquire. The stated selling price is the net price plus VAT. Lodpfx Aoz Efu Segrsrt An invoice with VAT will be issued. Warranty basis: Due to age and wear, the sale is exclusively to commercial businesses without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content: Ljdpfx Agod Su Hxjrjrt

Condition: good (used), Year of construction: 2006, Capacity 30 - 50 kg/h Lodpfx Agoz D Iulsrert Diameter of the briquets 50 mm Motor output 5,5 kW Dimensions (L/W/H) 2000 x 1300 x 1400 mm Weight 500 kg 1 m³

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. Lsdjwrp Emspfx Agrsrt The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: defective spare-parts repository (used), functionality: unexamined, Due to warehouse clearance and clean-up, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press SPÄNEX COMAFER, defective Briquetting press Type: SH50 Capacity up to 50 kg/h (material-dependent) Density 0.8 - 0.9 kg/dm³ (material-dependent) Briquet diameter approx. 50 mm Dimensions approx. 230cm x 140cm x 125 cm Feed hopper: diameter 120cm, height 93 cm Volume 1m³ Weight approx. 500 kg Can be installed under a dust extraction system The machine has been in my warehouse for some time. The machine is explicitly sold as defective, for spare parts, or for rebuilding by hobbyists, for export, etc. The machine is usually complete, but a functional test cannot be carried out. Ljdpfx Agjz Efvpsrert There are 2 identical machines in stock. The machines can also be purchased as a package. Condition: see pictures. (See pictures – a prior inspection is strongly recommended; simply leave your phone number by email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without any warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty is 12 months.

Condition: like new (used), Year of construction: 2019, operating hours: 1,150 h, functionality: fully functional, PRODECO E 60 Super Vertical Briquetting Machine Briquet diameter: 60 mm Max. briquet length: 60 mm Motor power: 5.5 kW Capacity: 10/60 kg/h Pressing force: 900 kg/cm² Hopper dimensions: 1600 x 1600 mm Supply voltage: 400 V Dimensions: 215 x 180 x 150 cm (H) Weight: 870 kg Year of manufacture: 2019 Lodpfx Aszl Aq Hogrsrt

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws Lrodpo E Dquofx Agrot PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Ledpfx Aoz Ea Rbegrort Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Transport weight: 10,000 kg Transport packages: 3 pcs.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *Selling mobile wood briquetting system. *Press: Ruf RB440, output > 2 tons/hour. *Briquet dimensions: L 150 x W 80 x H 80 - 110 mm *Press completely overhauled, with all supporting documentation. Lredpfx Aewhw Syogret *Truck with valid TÜV (technical inspection) until Jan. 2026, ready for use, also suitable for use in environmental zones / green license plate / tax-free!!! Classified as a self-propelled working machine. *PE packaging bags for approximately 90 tons, included. *Hydraulic pump Linde > New. *Gearbox discharge > New. *Suction fan motor 7.5 kW > New. *Complete hydraulic oil change with oil filter 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232, 335,937 km, built in 1990. *Truck with new, reinforced flatbed body!! Manufacturer: Suhr. *TÜV > New. *Tires, all 6 > New. *Brakes on front axle newly replaced. *Everything is sold with training provided. *If interested, please contact us by email.

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lrjdpfx Aexqdxcogrot Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, For sale is a highly efficient, perfectly coordinated recycling combination package from the German market leader WEIMA, consisting of the single-shaft shredder WL 600 and the hydraulic briquetting press C 170. Both machines are of German manufacture (“Made in Germany”) and have operated with absolute reliability. Ljdpfxszgq Trj Agrsrt We only used this machine for a short time because the project we had planned, involving deadwood from the natural forest, did not work out. However, this had nothing to do with the machine's functionality. We are sending the machine back to Germany because there is no market for it in Chile. We will add more pictures today of the packaged system, which will begin its journey next week.

Condition: good (used), Year of construction: 2014, high-performance briquette press Lrodpfx Agoztk Ayjrot year of manufacture 2014 with only approximately 2,400 operating hours with an 11 kW motor original price approximately €55,000

Condition: used, functionality: fully functional, Comafer Dinamic 250N briquetting machine with closed-loop oil cooling and cooler capacity: 100–250 kg/hour, depending on the material. Briquette diameter: 75 mm. cylindrical housing (ø1200) with inspection door, additional ring (sleeve) ø1200 / h930, pressing force approx. 1100 kg/cm2. 2 cylinders. briquette cylinder ø 200 mm. pump motor (11 kW / 15 HP, 380 V, 50 Hz). Monobloc, self-centering, without fixing rods for the round die. Electrical control panel with PLC, automatic and manual cycle. Lrjdsz D A Ugopfx Agrst Shut-down mechanism with open die and die pressure gauge. Digital thermostat for oil temperature control, level switch to prevent oil leakage. Closed-loop oil cooling system (air/oil). Closed-loop cooler for die cooling (580 mm x 550 mm x 908, weight 56 kg). threading head for the production of long briquettes, briquettes with uniform length, complies with CE standards dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Description For sale is a RUF 500 hydraulic briquetting press for compacting wood chips, sawdust, and comparable biomass residues. The machine was manufactured in April 2018 and is in very good condition. According to the machine display, it has only approximately 34.8 operating hours. Lsdpfx Agez Dfcajrjrt The RUF 500 is ideally suited for wood processing companies, sawmills, carpentry shops, and recycling and biomass plants that want to efficiently process their residual materials into high-quality briquettes. Technical data: Manufacturer: RUF Maschinenbau GmbH & Co. KG Type: RUF 500 Machine number: 2742 Year of manufacture: 04/2018 Voltage: 400 V Rated current: 52 A Frequency: 50 Hz Motor power: 22 kW Throughput: up to approximately 485 kg/h, depending on the material and bulk density Briquette dimensions: approximately 150 × 60 mm Maximum pressing pressure: approximately 1,700 kg/cm² Machine weight: approximately 3,800 kg Dimensions: approximately 2,900 × 2,000 × 2,100 mm Hydraulic briquetting Siemens SIMATIC HMI touch control Suitable materials: Wood chips, sawdust, planing shavings, shredded biomass, and comparable dry residual materials. The machine can be inspected and tested by arrangement. Price: €67,000 plus VAT.

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Type: I-40/85 Lrjdpfezyau Eox Agrot Year of construction: 1994 Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Motor: 11 kW Weight: 1800 Including feed screw and discharge chute.

Condition: used, Year of construction: 2013, We are offering this used AMIS ZBP 400 briquetting press, manufactured in 2013. We also include a Forst ARJES ZWS 110 wood shredder with a conveyor belt. However, these can also be sold separately. Lrjdpfszp Eyfox Agrst Amis Manufacturer: Amis Model: ZBP 400 Year of manufacture: 2013 Condition: used Machine type: Briquetting press Forst Shredder ZWS 110 with 30 kW motor 20 mm screen with electrical system with segmented base and slide with toothed rail Slide with roller guide Preparation for conveyor belt discharge Inclined conveyor belt AA = 1700 horizontal AA = 4500 vertical Belt width = 580 mm with PVC belt with metal-free zone with 1.5 kW drive If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge Lredpfx Aezvz Tbegrjt - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, Hydraulic briquette press Manufacturer: Winter Type: BP 450 Year of manufacture according to nameplate: 2022 Technical data: Capacity max. 450 kg/h Motor 35 kW / 400 V, 50 Hz Chip compression min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture < 14 % Briquette dimensions: Length 150 mm, Width 60 mm Dimensions L x W x H: 1,800 x 1,800 x 1,900 mm Weight 3,000 kg Purchase price net € plus applicable VAT. VAT will be shown separately on our invoice. Subject to changes, errors and prior sale. Sale is made without warranty and guarantee, and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m. Ledpezxlznefx Agrsrt

Condition: used, Year of construction: 2006, operating hours: 926 h, functionality: fully functional, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, overall weight: 750 kg, Equipment: emergency stop, Hydraulic briquetting press for compressing dry wood chips, sawdust, paper, cardboard, and other similar materials. Throughput (material-dependent) is approximately 30 to 50 kg/h. The machine was inspected at the WEIMA factory after 600 operating hours, and after that, I used the press very little. For this reason, I am offering the press for sale. Lodpfx Aeztl E Aegrsrt

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Ljdsv Rpxlspfx Agrjrt Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: used, total width: 1,100 mm, total height: 1,500 mm, total length: 1,800 mm, Motor power: 4.0 kW Hopper (diameter): 1000 mm, with agitator Throughput: 25 - 25 kg/h, depending on the material Lrodpjz D H Azofx Agrot

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5031183-000 104, input frequency: 50 Hz, input voltage: 400 V, power: 3 kW (4.08 HP), - Briquetting press with a storage container for compressing textile fibers of various material qualities - Our area of application: textile scraps (dust) from the tearing process - Also suitable for compressing wood scraps - The system was in operation from 2015 to 2020 Technical data: - Briquetting press with a 3kW hydraulic drive - 1400 RPM - 400V, 50 Hz - Briquetting output, depending on the type of chips and moisture content, 80 - 100 kg/h - Complete with 125 liters of hydraulic oil – including oil cooler and base - Transport lines + supports - Pusher plate SB1 with discharge screw, hydraulics, and electrical control, size 2000 x 2000 mm - Screw motor: 1.5 kW, 34.9 RPM - Hydraulic unit: 0.55 kW - Accessories CE: EC Declaration of Conformity according to Machinery Directive 2006/42/EC Lodpfxezcnvks Agrort Note: The system is located in Ulm and can only be inspected there.

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, For sale: 3 UMP BP 500 A sawdust briquetting machines. Model years: 2022, 2022, 2023. Ledpoyr S T Sofx Agrert The machines are fully operational and have all undergone a complete service.