Used Mütek Mgz 630 H for sale (59,967)

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Lodpfxjwzarco Amzjhn Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood. Another machine, available immediately (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times, Rotor diameter: 260 mm, Ledped E R D Ssfx Amzjhn Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated slide Screen size optional (12 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segment bottom + €2,170 net (prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks) Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Lhodpez Hq Aksfx Amzsn Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: MJ1-1139, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 0i-MF PLUS, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Max. spindle speed: 6,000 rpm MACHINE DETAILS Control: Fanuc 0i-MF PLUS Coolant supply: 46 bar Total weight: 17,000 kg Spindle operating hours: 1,600 h EQUIPMENT Chip conveyor Lodpfsxt E Ahjx Amzohn Table shower system (Grundfos SPK4-8) TSC cooling system with Grundfos MTR3-36/CRK2-260, 46 bar/60 Hz Mahle filter Renishaw NC-4 laser tool measurement system RMP-60 spindle probe

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 306533, Machine Specifications Technical Specifications Machine length: approx. 1850 mm Machine width: approx. 1200 mm Machine height: approx. 2300 mm Machine weight: approx. 550 kg Idler pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw blade length: 4700 mm Loading height: 1065 mm Cutting height: 350 mm Cutting width without width stop: approx. 610 mm Cutting width with stop: 150 mm Motor power: 0.75 kW Cutting speed: 10 - 100 m/min Table travel: approx. 600 mm Table feed speed: 0.03 - 0.3 m/min Extraction connection diameter: 1x Ø 120 mm + 1x Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1725 m³/h Electrical connection Lhedpfxewm Du Ej Amzsn Operating voltage: 400 volts / 50 Hz Current type: 3 x 400 volts Fuse protection: max. 16 amps Minimum cross-section: 1.5 mm²

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Lhjdpfx Amex Af Rdjzon Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97 09 05 010 1/2, filter pressure: 15 bar, pressure: 15 bar, cake thickness: 25 mm, warranty duration: 12 months, year of last overhaul: 2026, operating pressure: 380 bar, number of chambers: 25, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, Good day, We have two identical chamber filter presses in stock, which have been completely overhauled and are therefore in new condition. They are immediately available! Please see the attached photos: Chamber filter press – manufactured by MSE with plate thickness: 50mm each with an additional set of plates cake thickness: 25mm volume: approx. 210 l useful length approx. 1800mm (34 plates) format: 630x630 mm dimensions: 3700x1100x1800 mm (l x w x h) empty weight: 2700kg open filtrate discharge plate transport manual hydraulics electric Please let us know if you are interested in this press. We would be happy to send you a customized offer. Price on request. Lhodpfx Ajzt Nc Eemzon

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 9,267 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, coolant supply: 30 bar, spindle motor power: 26 W, number of spindles: 60, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, spindle nose: ISO 50, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, tool diameter: 250 mm, tool length: 550 mm, workpiece diameter (max.): 1,000 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Lhedpfx Aotvf Smemzon

Condition: good (used), Year of construction: 2014, Parts shown by hand not come. Lhedsz U Tikspfx Amzjn

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Lhjdpfxjyyppbj Amzsn

Condition: as good as new (ex-display), Year of construction: 2024, Special machine for shredding plastics Base machine from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc. - Semi-rigid thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded blades (reduced load absorption), - Small cutting gap between blade and counter-blade Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control: PLC Cutting unit opening (top) 600 x 800 mm The parts should be a maximum of approx. 500x500 mm *the height is less relevant Hydraulically operated slide Screen size as required (25 - 40mm) For plastics, coarser screens are recommended (30-40 mm) *If you want to shred finer, a two-stage shredding process with a downstream granulator type MVZ (screens 5-15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Further options available at an extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor belt removal) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Alternatively, manual start and stop on the conveyor belt + €595 net Requirements for the raw material: - The moisture content (as received) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. It is also possible for you to send us your material by freight forwarder, and we will document the test with photos and videos. --- *only for brittle plastics with medium hardness, *not for elastic or extremely hard and heavy plastics - this would affect the durability of the system. --- Optionally, the next larger machines would be available: Base machine: Shredder MGZ 830 K-S - 18.5 kW Cutting unit opening (top) 800 x 1,000 mm The parts should be a maximum of approx. 720x700 mm *the height is less relevant from €39,995 net * Options depending on effort Base machine: Shredder MGZ 1030 K-S - 22 kW Cutting unit opening (top) 1,000 x 1,000 mm Lhsdpfxod H R Sxj Amzjn The parts should be a maximum of approx. 900x700 mm *the height is less relevant from €49,975 net * Options depending on effort Base machine: Shredder MGZ 1330 K-S - 37 kW Cutting unit opening (top) 1,300 x 1,200 mm The parts should be a maximum of approx. 1,200x700 mm *the height is less relevant from €79,975 net * Options depending on effort

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Fan efficiency: 82.9% Shaft power: 73.8 kW Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Lodpfx Amjd Nqlcezohn Voltage: 400 Volt / 50 Hz Year of manufacture: 1995

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails Lhodpfx Amsyfw D Njzsn - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: excellent (used), Year of construction: 2006, For sale are functional and very well-maintained dual-fuel burners from the Weishaupt brand, model GL3-630 kW, complete with a gas line DUNGS DN 40. Weishaupt: GL3 - (630 kW) Burner type: GL3/1-E Design: Dual-fuel Lhodjzaby Rjpfx Amzon Output: 90 - 630 kW 16 - 53 kg/h Year of manufacture: 2006

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, torque: 262 Nm, controller manufacturer: Fanuc, controller model: 31iMA, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, total height: 3,200 mm, total length: 6,146 mm, total width: 3,567 mm, table load: 800 kg, overall weight: 20,600 kg, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, Control: Fanuc 31iMA X/Y/Z-axis: 1000 / 800 / 850 mm NC table accuracy: 0.001 degrees 2 pallets, 630 x 630 mm Maximum pallet load: 800 kg Workpiece size (diameter x height): max. 1000 x 1000 mm Spindle speed: 6000 rpm Spindle drive: 22 / 30 kW Torque: 262.6 Nm Tool holder: SK50 Tool changer: 60 stations Maximum tool weight: 27 kg Tool diameter x length: 120 x 545 mm Feed rate: 60 m/min Rapid traverse rate: 60 m/min Machine dimensions (L x W x H): 3567 x 6146 x 3200 mm Machine weight: 20600 kg Scraper conveyor chip removal system, manufacturer: KNOLL, type: 600 K-1/300; coolant filtration system, manufacturer: KNOLL, type: SF1000/Turbo-1; 70 bar high-pressure pump with 7 pressure stages, direct measuring system (glass scales), extraction system. Lhjdpfxoz Hluhe Amzon

Condition: used, Year of construction: 2021, operating hours: 712 h, * Garbin Fiber 630 E trenching machine Lsdpoyvn Aljfx Amzehn * Year of manufacture: 2021 * Operating hours: 712 h * Including remote control * Kubota engine 54 kW * Weight: 3,500 kg * More pictures and videos available via Whatsapp * Details without guarantee, subject to prior sale.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, torque: 262 Nm, controller manufacturer: Fancu, controller model: 31iMA, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, total height: 3,200 mm, total length: 6,146 mm, total width: 3,567 mm, table load: 800 kg, overall weight: 20,600 kg, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, X / Y / Z axis 1000 / 800 / 850 mm NC table 0.001 degrees 2 pallets 630 x 630 mm Pallet load max. 800 kg Workpiece size (diameter x height) max. 1000 x 1000 kg Spindle speed 15000 rpm Spindle drive 22 / 30 kW Lodpfxjz Hlvxe Amzohn Torque max. 262.6 Nm Tool holder SK50 Tool changer 60 stations Tool weight max. 27 kg Tool diameter x length 120 x 545 mm Feed rate 60 m/min Rapid traverse 60 m/min Machine dimensions L x W x H 3567 x 6146 x 3200 mm Machine weight 20600 kg Accessories Chip conveyor, type: 600 K-1/300, manufacturer: KNOLL; KNOLL high-pressure system KF400/2250 (70 bar); 70 bar high-pressure pump with 7 pressure stages, direct measuring system (glass scales), extraction system.

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: Lhodpfx Amjdwktkjzsn - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, all stainless steel Lodpfxjzzcu Dj Amzjhn suitable for thermic oil heated (= 250kW) with lower and upper belt frying length 5.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 9.100 x 1.900 x 2.900 mm

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ljdpfxjziw Nls Amzshn Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Deflection pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw band length: 4,700 mm Loading height: 1,065 mm Cutting height: 350 mm Cutting width without rip fence: 610 mm Cutting width with fence: 150 mm Cutting speed: 10 - 100 m/min Table travel: 600 mm Ljdpfxjyzy Dre Amzjhn Table feed speed: 0.03 - 0.3 m/min MACHINE DETAILS Extraction connection diameter: 1 x 120 mm + 1 x 100 mm Required air velocity: minimum 25 m/s Required air volume flow: 1,725 m³/h Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,200 x 2,300 mm Machine weight: 550 kg Motor power: 0.75 kW Operating voltage: 400 Volt / 50 Hz Power supply: 3 x 400 Volt Fuse protection: maximum 16 Amperes Minimum cross-section: 1.5 mm²

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side Lsdpfx Aszuw E Rjmzehn - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Ljdpsyarq Tefx Amzehn

Condition: excellent (used), Year of construction: 2007, Mori Seiki NH6300 DCG Horizontal Machining Center Installation year: 2007 BT 50 spindle, 10,000 rpm High-pressure coolant through the spindle, 50 bar, with a dedicated paper filter tank 10 pallets, 630 x 630 Continuous B-axis Axis travels: X900, Y800, Z980 180-position tool magazine Tool breakage detection in the magazine Lhodpfxsz Ea Dhj Amzsn Dust extraction system FMS Fastems linear 10-pallet system (5+5) 2 loading stations

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 850 mm, controller manufacturer: FANUC, controller model: oi-MD, total height: 3,362 mm, table load: 1,000 kg, overall weight: 23,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 4, This 4-axis SPINNER H630 horizontal machining center was manufactured in 2012. Ideal for precision engineering, it offers robust construction and reliability for various machining tasks. Consider the opportunity to buy this SPINNER H630 horizontal machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Torque max (nm): 139 / 164 or 556 / 656 Lhodpfx Aezvvkzjmzjn • Connected load: 42 kva • Table size: 2 x 630 x 630 mm • Height top edge of table (from floor): 993 mm • Clear width of door opening: 1200 mm • Table holes: m16 • Tool to tool: 5 seconds • Standard double arm changer Extra Information Machine still under power Dimensions Machine Depth 5970 mm