Used Mütek Shredder, Pallet Shredder for sale (7,084)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Neckartailfingen
7,967 km
Shredder, pallet shredder
mütekMGZ 1030
Call
Condition: as good as new (ex-display), Year of construction: 2025, showroom machine
machine available
Advantages:
+ special rotor with reduced knife protrusion
+ Motor 22 kW
+ effective square knife
* for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more.
Engine: 22 kW; 400 V - 50 Hz - 3 ph,
Sieve: 15/20 mm
hydraulically operated slide
Current screen perforation (15/20 mm) * can be exchanged
Extraction nozzle Ø 200 mm.
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Example image above: The color of the system may vary
Weight: 1920 kg.
Included as standard:
- Control cabinet with PLC control
- automatic star / delta start
- fast hydraulics
- automobile. OFF when the rotor is idling
- Speed 70-90 rpm for high throughput
- cycle control to avoid idle times,
- performance-increasing step control of the hydraulic slide,
Hodjdv Eu Hopfx Amgen
- Pertinax guides for hydraulic slides,
- vibration-damping machine feet,
- CE conform.
The following options are available at an additional cost:
- Additional row of knives + € 2,790
- segment bottom + € 6,890
(recommended for materials with a wall thickness thinner than 3 mm)
- Special K-rotor storage + € 3,480
If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary)
- Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net
- Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net
- Overbelt magnet + € 5.980 net
- Control conveyor belt and overbelt magnet + € 2.750 net
(Start and stop synchronized with the hacker)
- Exhibition hopper 1500x1500 mm + € 3.480 net
Requirements for the raw material:
- The moisture content (atro) must be below 30%
- The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear
Listing
Neckartailfingen
7,967 km
Shredder for pallets and waste wood
mütekMRZ 1530
Call
Condition: new, Year of construction: 2024, production time appr. 4 months
* for suction perception, see picture 4 and 5
Tariff number: 84659600
Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling,
Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph
Knife: 76 pieces, rotatable
Knife size: 35 x 35 x 20 mm
Rotor diameter: 360 mm
Control: PLC Siemens S7-1200
Funnel opening approx. 1530 x 1235 mm
Hopper volume approx. 2.5 square meters
hydraulically operated slide
Screen perforation: 10 - 30 mm
Extraction nozzle Ø 200 mm
Weight approx. 4,500 kg
Hodpfx Aed Hkqhsmgsn
Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm
Turbo coupling
Included as standard:
- V-rotor for other throughput
- 2nd row of knives on the rotor
- Control cabinet with Siemens PLC control
- automatic star / delta start
- fast hydraulics
- Automobile. OFF when the rotor is idling
- Speed 70-90 rpm for high throughput
- Clock control to avoid idle times
- Performance-increasing step control of the hydraulic slide
- Pertinax guides for hydraulic slides
- anti-vibration machine feet
- CE conformity
The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer
Recognition from the raw material:
- The moisture content (atro) must be below 30%
- Metals and mineral impurities such as sand, stones, etc. Interests to interests wear
Listing
Drachten
7,501 km
Wood shredder - pallet crushing line
ROBUSTP150 Twin - pallet crushing line
Call
Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE :
2 Shredder
Hedey Dpnxjpfx Amgsn
2 conveyors with magnetic drum for nail removal.
Used only 200 hours AMIS shredder and 30 hours RUBUST shredder.
Like a new and good price.

Get information now
+49 201 857 86 122
+49 201 857 86 122
List now
*per listing / month
Listing
Bad Arolsen
7,774 km
Shredder for hollow bodies, pallets, etc.
ZENOZTLL 1600x1800
Call
Year of construction: 2015, operating hours: 13,275 h, condition: used, functionality: fully functional, rotor diameter: 800 mm, We are offering this used ZENO ZTLL 1600x1800 shredder for hollow bodies, pallets, etc., year of manufacture 2015.
This unit is very well suited for processing hollow bodies, PE waste bins, PP + PE crates, PP KLTs, and PO pallets. 1.1 m³ waste bins can be fed and shredded in one piece. The throughput for these fractions is 1,500 kg per hour.
Other hard plastics such as ABS, PS, PMMA, and ABS-chromed materials can also be processed very efficiently. For these, the throughput rate is 2,000 kg per hour.
Type: ZTLL 1600x1800
Machine number: 15A-6191
Year of manufacture: 2015
Weight: 12,000 kg
Main drive power: 90 kW
Main motor current: 161 A
Main motor voltage: 400/690 V
Main motor speed: 1,450 rpm
The main motor is equipped with forced ventilation. The motor was replaced with a new one in November 2023.
Rotor speed: 80 - 140 rpm
The rotor is equipped with 145 cutting crowns, each measuring 40 mm x 40 mm. The original rotor has been replaced.
Hodpfx Amjy Efgmsgjn
Hydraulic drive power: 5.5/1.1 kW
Hydraulic motor current: 11/2.6 A
Hydraulic motor voltage: 400/690 V
Hydraulic motor speed: 1,500 rpm
The unit is ready for immediate operation after installation.
The floor of the unit is uneven.
The unit is stored in 34431 Marsberg-Westheim, near the A44.
We replaced the unit to further increase the throughput capacity of our facility.
If you have any questions or require further information, please feel free to send us a message or call us.
Listing
Goor
7,583 km
Wood shredder / pallet shredder
LUMAGO D.S.C. Dutch Shredder CompanyPYTHON-XL
Call
Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz•
• Electric motorreductor 15KW, 400V, 3phs, 50Hz
40% MORE torque compare PYTHON 1600 Standard
• Opening 1600 x 1000 mm
Hjdpjvx Hkzofx Amgen
• Main dimensions L 2700 x B 1400 x H 2600mm
• Discharge opening 400x 100mm
• Height discharge opening ca 1000mm
• Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop
• Easily moved either with forklift or by means of lifting eyes
• Weight approx. 2700 kg
• Comprehensive machine manual
• Finishing in RAL 3002 and RAL 7022
• (Subject to technical changes)
• CE certified and "Made in Holland"
Listing
Goor
7,583 km
Pre shredder Woodshredder Palletbreaker
LUMAGO D.S.C. Dutch Shredder CompanyPYTHON 1300
Call
Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 20 h, Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz•
• Hopperopening 1300 x 700mm
• Main dimensions L 2100 x B 850 x H 1600mm
• Outlet opening ca 400x 100mm
• Height under output ca 400mm
• Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button
• Easy handling/ transport by forktruck or lifting eyes
• Weight ca 1100 kg
• Machine Manual incl..
• Paint in RAL 3002 and RAL 7022
Hjdpfxsf N Nk Hj Amgen
• (subject to technical changes)
• CE certified and “Made in Holland”
Listing
Goor
7,583 km
Pre shredder Woodshredder Palletbreaker
LUMAGO D.S.C. Dutch Shredder Company BVPYTHON 1600
Call
Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Shredder typ PYTHON 1600, with 11 KW electricmotor, 400V 50Hz•
• Hopperopening 1600 x 700mm
• Main dimensions L 2400 x B 850 x H 1600mm
• Outlet opening ca 400x 140mm
• Height under output ca 400mm
• Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button
• Easy handling/ transport by forktruck or lifting eyes
• Weight ca 1300 kg
• Machine Manual incl..
• Paint in RAL 3002 and RAL 7022
• (subject to technical changes)
• CE certified and “Made in Holland”
Hjdpfx Amjf Sgcbjgen
Listing
Goor
7,583 km
Pre shredder Woodshredder Palletbreaker
LUMAGO D.S.C. Dutch Shredder CompanyPYTHON 1600
Call
Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Shredder typ PYTHON 1600, with 11 KW electricmotor, 400V 50Hz•
• Hopperopening 1600 x 700mm
• Main dimensions L 2300 x B 850 x H 1600mm
• Outlet opening ca 400x 140mm
• Height under output ca 400mm
• Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button
• Easy handling/ transport by forktruck or lifting eyes
• Weight ca 1800 kg
Hsdsf N Naropfx Amgsn
• Machine Manual incl..
• Paint in RAL 3002 and RAL 7022
• (subject to technical changes)
• CE certified and “Made in Holland”
Listing
Goor
7,583 km
Pre shredder Woodshredder Palletbreaker
LUMAGO D.S.C. Dutch Shredder CompanyPYTHON 1300
Call
Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz•
• Hopperopening 1300 x 700mm
Hsdpsgn Hcbjfx Amgen
• Main dimensions L 2100 x B 850 x H 1600mm
• Outlet opening ca 400x 100mm
• Height under output ca 420mm
• Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button
• Easy handling/ transport by forktruck or lifting eyes
• Weight ca 1100 kg
• Machine Manual incl..
• Paint in RAL 3002 and RAL 7022
• (subject to technical changes)
• CE certified and “Made in Holland”
Listing
Goor
7,583 km
Pre shredder Woodshredder Palletbreaker
LUMAGO D.S.C. Dutch Shredder CompanyPYTHON 1300
Call
Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz•
• Hopperopening 1300 x 700mm
• Main dimensions L 2100 x B 850 x H 1600mm
• Outlet opening ca 400x 100mm
• Height under output ca 400mm
• Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button
• Easy handling/ transport by forktruck or lifting eyes
Hsdpof N Nlvefx Amgen
• Weight ca 1100 kg
• Machine Manual incl..
• Paint in RAL 3002 and RAL 7022
• (subject to technical changes)
• CE certified and “Made in Holland”
Listing
Goor
7,584 km
Pre shredder Woodshredder Palletbreaker
LUMAGO D.S.C. Dutch Shredder CompanyPYTHON 1300
Call
Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz•
• Hopperopening 1300 x 700mm
• Main dimensions L 2100 x B 850 x H 1600mm
• Outlet opening ca 400x 100mm
• Height under output ca 400mm
• Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button
• Easy handling/ transport by forktruck or lifting eyes
• Weight ca 1100 kg
Hjdpfef N Nlrjx Amgen
• Machine Manual incl..
• Paint in RAL 3002 and RAL 7022
• (subject to technical changes)
• CE certified and “Made in Holland”
Auction
Ends in
d
h
min
s
Auction ended
Nordrhein-Westfalen
7,702 km
Hand pallet truck
Hand Pallet Truck
Condition: not inspected (used), functionality: unexamined, load capacity: 2,500 kg, fork length: 1,150 mm, overall weight: 400 kg, total length: 1,500 mm, total width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder!
By placing a bid, you agree to collect the item on time between 23/06/2026 and 26/06/2026!
TECHNICAL DETAILS
Load capacity: 2,500 kg
Fork length: 1,150 mm
Hedoy D Ti Topfx Amgon
MACHINE DETAILS
Dimensions & Weight
Dimensions (L x W x H): 1,500 x 1,000 x 1,300 mm
Weight: 400 kg
External reference: 2
Listing
Ireland
6,634 km
Pallet Wrapper with Ramp
Ecomat Pallet Wrapper
Call
Condition: excellent (used), Ecomat Pallet Wrapper
Complete with floor mounted ramp
Hedpfx Aoy Tnkkomgon
Variable speed control
25 pallets / hour
Max wrap height 2400mm
Rotating table 1650mm
In excellent condition
Listing
Neckartailfingen
7,967 km
Metal separator in pipe, Pipe Magnet
mütek SystemtechnikHawk-Eye
Call
Condition: new, Year of construction: 2026, Diameter: 160mm
Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request.
Very stable industrial design.
Ideal for separating nails/metal parts from material flows.
For example after a wood shredder.
including 3 extremely powerful magnets
* If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 €
- Neodymium magnets are also available instead of ferrite for an additional charge
Your advantages:
+ Extremely large inspection door with seal
for easy stripping of the nails
+ Stable quick-release fastener
Hjdpfx Amochuvrogon
+Made in Germany
Inspection door / opening: 35x18 cm
Installation length may vary
Listing
Neckartailfingen
7,967 km
Briquetting press
mütekMPP 180
Call
Condition: new, Year of construction: 2026, Availability upon request
Very robust machine with high pressing force
- also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development, and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio
Supplement for demonstration cooling unit + €4,980 net,
(can also be retrofitted later)
* Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil
* Cooling unit recommended for regular use of more than 4 hours at a time.
Tariff number: 84793010,
Briquette diameter: 70 mm,
Front bushing: 125 mm,
Max. briquette stroke: 100 mm,
Optional briquette stroke: 80 mm,
Capacity (depending on material): up to 150 kg/h*
*depending on bulk density,
*based on a bulk density of 200 kg per cubic meter.
.
Motor power: 9.2 kW,
400 volts / 50 Hz / 3-phase,
Length: 2095 mm,
Width: 1300 mm,
* with large chamber 1600 mm
Height: 1700 mm,
Weight: 1250 kg,
Hjdpfxjd Nm Sie Amgsn
Oil capacity: 220 liters,
Silo diameter: 1200 mm
Silo capacity: approx. 1 cubic meter
Pump: 75 liters
Hydraulic pre-compressor
Cooling option for pressing tongs: yes, with optional coolable pressing tongs
Cooling option for hydraulic oil: yes
Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory)
Level monitoring option: yes
Extruded briquette option; Yes (depending on material)
Optional enlarged feed slide: Yes, with special accessory enlarged feed slide
CE compliant
Raw material requirements:
- The moisture content (dry) must be between a minimum of 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: Temperature-controlled room at a minimum of +5°C
- The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.
Listing
Neckartailfingen
7,967 km
Briquetting press
mütek SystemtechnikMPP 60
Call
Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic.
+ Tried and tested, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio
Options for an extra charge:
* Surcharge for the level indicator that enables automatic operation + € 995 net
* Surcharge for large pre-compression chamber + 980 €
(recommended for light material like straw)
Briquette diameter: 50 mm
Front bush: 50 mm
Briquette stroke max .: 40 mm
Briquette lift opt .: 40 mm
Throughput (depending on material): 30-60 kg / h *
* depending on the bulk weight
* based on a bulk weight of 200 kg per cubic meter
.
Motor power: 5.5 kW
400 volts / 50 Hz / 3 phases
Length: 1680 mm
Width: 1100 mm
Hedogl Nlmjpfx Amgen
Height: 1500 mm
Weight: 680 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo content: approx. 0.7 square meters
Pump: 27 liters
Hydraulic pre-compressor
Option cooling pressing tongs: no
Hydraulic oil cooling option: yes
Level monitoring option: yes
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18%
- Maximum chip length 15 mm
- Installation temperature: temperature-controlled room at at least + 5 ° C
- The customer must insure himself against loss of hydraulic oil
- The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear
Listing
Neckartailfingen
7,967 km
Shredding plant
mütek630 AL
Call
Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net
A machine is currently available immediately.
The ideal machine for shredding voluminous, light aluminum chips or turnings.
Not suitable for more solid aluminum parts.
Includes:
+ Optimized cutting geometry
+ Adapted slide control
+ Load-dependent controlled hydraulic slide
(which presses the chips against the cutting mechanism)
Motor: 18.5 kW; 400 V - 50 Hz - 3 ph,
Hedpfx Amogmh H Togon
Blade: 40x40mm, multi-rotatable,
Rotor diameter: 260 mm,
Control: Omron PLC,
Cutter opening 600 x 800 mm,
Funnel volume approx. 0.6 qbm,
Hydraulically operated slider
Sieve perforation of your choice (15 - 40mm)
Suction nozzle Ø 160 mm
Weight approx. 1,300 kg
Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm
The following options are available for an additional charge:
- Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net
- Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net
- Overband magnet + €6,980 net
- Control of conveyor belt and overband magnet + €2,750 net
(Start and stop synchronized with the chipper)
We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.
Listing
Neckartailfingen
7,967 km
Briquetting press, briquette press
mütek SystemtechnikMGP 60
Call
Condition: new, Year of construction: 2025, Another machine immediately available!
Hjdjv Rpxljpfx Amgen
Briquetting press with PLC control and automatic briquette length adjustment
Throughput: up to max. 60 kg/h
Briquette: 50 mm cylindrical
Motor: 5.5 kW
Dimensions: 1,900 x 1,350 x 1,410 mm
Weight: approx. 860 kg
Requirements:
Feed material should ideally be shorter than 25 mm chip length
Moisture content 6–12% ATRO
Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc.
If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.
Listing
Neckartailfingen
7,967 km
Wood shredder, shredder, chipper
mütekMRZ 830 ECO
Call
Condition: as good as new (ex-display), Demonstrator with 7 operating hours
Another machine available immediately (ex works in Neckartailfingen)
MRZ 830 Shredder
Custom tariff number: 84659600
Feed opening 800 x 1000 mm
Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph
Blades: multi-rotatable
Hydraulically operated slide gate
Screen perforation of your choice (10 - 40 mm)
Weight approx. 1,600 kg
Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm
Turbo clutch
Included as standard:
- Automatic star/delta start-up
- Fast hydraulics
- Auto. OFF when the rotor is idle
- Speed 70-90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-enhancing step control of the hydraulic slide
- Pertinax guides for the hydraulic slide
- Vibration-damping machine feet
- CE compliant
.
The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer.
Included:
- Raise the shredder by 30 cm (prepared for conveyor belt)
Additional shredder options:
- Articulated conveyor belt + €8,770 net
Horizontal section: 1,200 mm
Rising section: 2,500 mm
Angle: adjustable from 0-60 degrees
Discharge height: approx. 2,000 mm
+ - 100 mm
- Overbelt magnet + €6,780 net
Hodsv Sqrpepfx Amgjn
- Conveyor belt and overbelt magnet control + €2,750 net
(Start and stop synchronized with the shredder)
Raw material requirements:
- The moisture content (dry) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear
Listing
Neckartailfingen
7,967 km
Briquetting press, Briquetter aluminium
mütekMPP NEM 300
Call
Condition: new, Year of construction: 2026, Production time appr. 4 months
Our best-selling briquetting press series
+ Tried and tested, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several hundred machines in use with satisfied customers
+ Good price performance ratio
Throughput approx. Up to 200 kg per hour * strongly dependent on the material.
- in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion.
- in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion.
Technical specifications:
Motor: 7.5 KW + 0,55 kW Cooler
400 volts / 50 Hz / 3-phase,
Front bush: 125 mm,
Briquette stroke max .: 100 mm,
Briquette stroke opt .: 80 mm,
Pump: 80 liters,
Storage container approx. 0.5 qbm content (expandable),
Hedpjchqxxofx Amgon
Diameter: 1200 mm,
with agitator discharge,
Hydraulic unit complete with oil tank 220 liters
Dimensions approx. 2095 x 1600 x 1310 mm lxwxh,
Weight 1370 kg,
Automatic on-off switching via level indicator
CE compliant.
.
Requirements for the raw material:
- Chip length maximum 20 mm
- Installation temperature: temperature-controlled room at at least + 5 ° C
- The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear
Listing
Neckartailfingen
7,967 km
Briquetting Press
mütekMPP 280
Call
Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force
- is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible.
Our best-selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio
Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later)
* cools the pressing tongs (important from 3.5 hours) and the hydraulic oil
* Cooling device recommended for regular use of more than 3.5 hours at a time.
Briquette diameter: 80 mm
Front bush: 125 mm
Briquette stroke max .: 100 mm
Briquette lift opt .: 80 mm
Output (depending on material): up to 200 kg / h *
* depending on the bulk weight
* based on a bulk weight of 200 kg per cubic meter
Motor power: 9.2 kW
400 volts / 50 Hz / 3 phases
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo content: approx. 1 qbm
Pump: 75 liters
Hydraulic pre-compressor
Cooling pressing tongs option: yes, with special accessory coolable pressing tongs
Hydraulic oil cooling option: yes
Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory)
Level monitoring option: yes
Strand briquette option; yes (depending on material)
Option of enlarged filling slide: yes, with special accessory enlarged filling slide
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18%
Hjdpfjxfwdox Amgen
- Chip length maximum 20 mm
- Installation temperature: temperature-controlled room at at least + 5 ° C
- The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear
Trust Seal
Dealers certified through Used-Machines

Listing
Neckartailfingen
7,967 km
Crushing plant
mütekMRZ 630 - 18,5 kW
Call
Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours
Another unit available immediately (ex works Neckartailfingen)
*Options at additional cost – see below
Included:
+ Profile rotor for increased throughput performance
We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos.
Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Knives: 15 pieces, reversible multiple times
Optional double knife row + €995 net
Rotor diameter: 260 mm
Control: Siemens S7-1200 PLC
Cutting unit opening: 630 x 820 mm
Hopper volume: approx. 0.6 m³
Hydraulically operated pusher
Screen perforation as desired (10 - 40 mm)
Extraction port Ø 160 mm
Weight: approx. 1,300 kg
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% dry basis.
Hodpfx Ajb Ny Eyjmgsn
Standard features included:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start
- Rapid hydraulics
- Automatic stop when rotor is idle
- Speed 70-90 rpm for high throughput
- Cyclic control to avoid idle times
- Performance-boosting incremental control of the hydraulic pusher
- Pertinax guides for the hydraulic pusher
- Vibration-damping machine feet
- CE compliant
Optional extras for the shredder (at additional cost):
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net
- Eco-rings: + €1,980 net (recommended for over 20% hardwood)
- Double knife row + €995 net
- Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm)
- Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm)
- Automatic overbelt magnet + €5,980 net
Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination)
- Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net
Raw material requirements:
- Moisture content (dry basis) must be below 30%
- Installation temperature: temperature controlled room, at least +5°C
- Metals and mineral contaminants such as sand, stones, etc., will increase wear
Listing
Neckartailfingen
7,967 km
Magnetabscheider
mütekHAWK-EYE
Call
Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath.
*Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets.
Extremely high degree of separation, depending on the bulk height and the starting material.
Probably the most compact overband magnet on the market.
The competition often uses the less powerful ferrite magnets to save costs.
dimensions approx.
Length: 104cm
Width: 22cm
Height: 28 cm (at the motor)
*Without controller
Surcharge for simple manual start/stop control + 495 €
A high-performance industrial neodymium magnet is installed.
High-performance neodymium magnet approx. 600x68x36.5 mm
* So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic.
This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site
Ideal for separating nails from wood chips.
Hjdpfx Amodubpuegen
Optionally also in a single-shaft shredder that is sucked off
Requirements:
*Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm
*Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm.
-----
Optional at extra charge:
Cross and ascending belt demonstrators from € 7,995 net
Listing
Neckartailfingen
7,967 km
Shark
mütek630 K
Call
Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding
Base machine from €24,990 net
Ideally suited for shredding:
- Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc.
- Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET
Included:
- Special rotor with embedded knives (reduced load uptake)
- Minimal cutting gap between rotor and counter knives
Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Control: PLC
Cutting chamber opening at the top: 600 x 800 mm
Maximum recommended input material size: approx. 500 x 500 mm (*height less critical)
Hydraulically actuated pusher
Screen perforation options: 25 - 40 mm
For plastics, coarser screens are recommended (30-40 mm)
*For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended
Exhaust port Ø 160 mm
Weight: approx. 1,300 kg
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
Additional options available at extra charge:
- Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net
Hedjd H R Sxepfx Amgsn
- Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net
- Overbelt magnet: + €5,980 net
- Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder)
- Alternatively, manual start/stop function at conveyor: + €595 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- Metals and mineral contaminants such as sand, stones, etc. will result in increased wear
We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos.
---
* Only for brittle plastics of medium hardness.
* Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system.
---
Optional: Larger machine sizes available
Base machine: Shredder MGZ 830 K-S – 18.5 kW
Cutting chamber opening at the top: 800 x 1,000 mm
Maximum recommended input material size: approx. 720 x 700 mm (*height less critical)
From €39,995 net (*options subject to additional cost)
Base machine: Shredder MGZ 1030 K-S – 22 kW
Cutting chamber opening at the top: 1,000 x 1,000 mm
Maximum recommended input material size: approx. 900 x 700 mm (*height less critical)
From €49,975 net (*options subject to additional cost)
Base machine: Shredder MGZ 1330 K-S – 37 kW
Cutting chamber opening at the top: 1,300 x 1,200 mm
Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical)
From €79,975 net (*options subject to additional cost)
Listing
Neckartailfingen
7,967 km
Briquetting press
mütekMFP
Call
Condition: as good as new (ex-display), Year of construction: 2026, Machine available at special price
Machine available immediately (ex works Neckartailfingen)
Demonstration unit
Your benefits:
+ Very robust, simple technology
+ Excellent price-performance ratio
+ Suitable for continuous operation
+ Long-established, reliable machine
Including control cabinet with timer operation
The press is switched on manually and will run until the set time on the timer (e.g. 4 hours) has elapsed. After that, the press switches off automatically.
Technical data:
Briquette dimensions: 30/35 mm (square),
Hsdofci D Ajpfx Amgen
Briquette length: 5–35 mm (depending on material)
Throughput capacity: up to max. 25 kg/h (depending on material)
Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H),
Machine weight: approx. 250 kg
Silo capacity: approx. 250 liters
Motor: 2.2 kW, 400 V, 50 Hz
Noise emission: 62 dB
Raw material requirements:
- Wood shavings and dust less than 15 mm in length
- Moisture content less than 15% ATRO
- Sand, stones, metals, and minerals increase wear
---
Optional upgrades (at extra cost):
- Timer function + €490 net
Machine is started manually and switches off automatically after preset time X.
- Level sensor for automatic operation + €1,450 net
Press starts and stops automatically
* NEW! Now also available in 230 Volt version
Motor then 3 kW instead of 2.2 kW
Surcharge + €690 net (delivery time approx. 8 weeks)
---
We make it easier for you to find: "mütek shredder, pallet shredder"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time

Get information now
+49 201 857 86 122
+49 201 857 86 122
List now
*per listing / month







































































































































































































































































