Used Mütek Systemtechnik Hawk-Eye for sale (3,518)

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: Lsdpfetqfhxox Amzsah When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. Lajdpfx Asdubpusmzjh ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € Ledpfxechuvrj Amzeah - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Ljdpfxev Rpxlj Amzeah Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) Lodegmfa Ajpfx Amzeah - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput Lajdpsdwktkjfx Amzsh - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: like new (used), Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Ljdpfx Amegl Nlmjzsah Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1731118200, input voltage: 24 V, year of last overhaul: 2022, input frequency: 50 Hz, Equipment: documentation/manual, Labeling machine for round products for sale Laodpfsz Nlprox Amzjh A high-performance labeling machine for the automatic labeling of various round products is for sale. The machine is suitable for, among other things: - Sausages - Bottles - Candles - Rolls and other cylindrical products Currently, the machine is used for labeling sausages. It is in very good and well-maintained condition and is still in daily use. This allows the reliable function to be verified under real production conditions. Depending on the design, different product diameters and lengths can be processed. The machine is therefore flexible and suitable for both existing production lines and various product variants. If you are interested or would like further information, please do not hesitate to contact us. An inspection of the labeling machine is possible after prior appointment.

Condition: new, Year of construction: 2026, Briquetting press NEM 900: Ledpfx Amsgfm Ryozoah production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Lajdpfx Amsffh Atjzsh Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 1 kg, Equipment: documentation/manual, type plate available, For sale is a ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research, especially when measuring components in challenging environments. Fast application, easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: · T-Scan Hawk 2 Lite · Blue Class 2 laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS calibrated) · Sensor cable · Transport case · Incoming inspection at our facility with sphere bars according to ISO 10360 · Acceptance certificate with proof of traceability · ZEISS INSPECT OPTICAL 3D Free · Sensor driver T-SCAN Hawk 2 ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing and processing of polygon meshes · Element construction: regular geometries, points, sections, curves, surfaces, dimensions · CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · Comparison against CAD with colored deviation display Lasdpfxezyp Stj Amzsh · Dimensioning and form/position evaluations according to ISO GPS and ASME Y14.5 · Report module Sensor driver T-SCAN Hawk 2 · Setup and calibration · User-guided calibration · Measurement data acquisition and project management · Configurable workflow assistant

Condition: good (used), Clean air extraction system Used machine, in good condition Lsdpfxsrb D No Amzsah Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Year of construction: 2010, condition: used, Precise fill level control for detecting underfilling and overfilling of bottles. P max: 10 bar Current: 8 A Voltage: 230 V Frequency: 50 / 60 Hz Length: 1,2 m Width: 0,93 m Height: 2,2 m Lodpoztzcdsfx Amzjah Weight: 350 kg Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Year of construction: 2020, operating hours: 100 h, condition: excellent (used), functionality: fully functional, overall weight: 300 kg, total length: 1,330 mm, total width: 840 mm, total height: 1,870 mm, compressed air connection: 6 bar, type of input current: AC, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min Lajdpfx Amoxuqtbozsh - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Laodpoxmkcmsfx Amzeh

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SK02UXKP0365, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, Auction of a Zeiss T-Scan Hawk with only 20 operating hours! TECHNICAL DETAILS Maximum measuring range: 550 mm x 600 mm Measuring accuracy: 0.02 mm + 0.035 mm/m MACHINE DETAILS Laser class: Class 2M (eye-safe) according to IEC 60825-1:2014 Laodox Sqfnspfx Amzoh Operating hours: 20 EQUIPMENT Notebook GOM Inspect software

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, resulting in very few spindle operating hours! - Pallet dimensions: approximately 320 x 320 mm - The pallets are clamped onto the rotary table Lsdpfx Aoy Tvcuemzsah - Tool holder: HSK-E 40 - For further technical data, see the images - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, overall weight: 300 kg, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm Ljdpfjunh I Nex Amzjah - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear Lajdpfx Asgbkkrsmzeh

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) Lodpfewkpx Rex Amzsah - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg Lodpfsyx Hgbjx Amzsah • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand Laodpfx Asxt Dk Rjmzoh The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Ljdpox Af Rdefx Amzoah Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Year of construction: 2015, condition: like new (used), Item: M-09300-Combi-Packer STAINLESS STEEL COMBI PACKER Multipack Producer:Sema Systemtechnik Laedpeh Hq U Uefx Amzoh Machine Model: 1400s-FN-TPW Year of production: 09/2015 Complete Stainless Steel That is not used long time, like new one!

Year of construction: 2007, condition: used, Additional title: Residual liquid, bottom, mouth, sidewall control Capacity: 32000 bottles/h Power: 3,6 kW Voltage: 400 V Frequency: 50/60 Hz Compressed air: min. 6 - max. 10 bar Laedpjxbpg Hsfx Amzjh Length: 2,5 m Width: 1 m Height: 2,5 m Weight: 1700 kg Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles Running direction: right-left Operation / Control: Heuft Features: residual liquid, bottom, body, mouth, side wall