Used Mahros Gp for sale (1,235)

Year of construction: 2016, condition: used, * MARHOS brand panel turning device code MMA004.06 Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: transverse to longitudinal. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. Isdjw Db Htepfx Amgsih

Year of construction: 2016, condition: used, Panel rotation device used in production lines. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: longitudinal to transverse. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. Iiodew Da Shepfx Amgjh

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from longitudinal to transservsal This device is commonly used in the wood and furniture industry to facilitate the movement of Iedpfx Amerzhfaegoih panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask! Isdpfx Amsrzhfdjgsih

Year of construction: 2010, condition: excellent (used), I sell the Destacking device SCM MAHROS PONTE C/S, year 2010. Stacking device one side feeding / also suitable for pallets. Catching head rubber pads system parallel Vacuum-System (including pump) Automatic loading. Iiodpfxowyf Utj Amgeh Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Available immediately. Ready for work.

Year of construction: 2016, condition: used, Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: longitudinal to transverse. This device is commonly used in the wood and furniture industries to facilitate the movement of panels during processing. If you have any further questions or require further details, please don't hesitate to ask! TECHNICAL DETAILS TO BE VERIFIED Isdow Db Epspfx Amgsih

Condition: excellent (used), CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Author 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 912: mm 100 /1000 (o 500+500) 238400A) Loader (Bridge Frame) "MAHROS" single station, Mod. Runner 238400B) Connection transfer unit, with tilter (180°, up-side-down) "MAHROS" Mod. Rib 238400C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 912 - N.2 Vertical electro-spindles (on the Y-axis) for fittings Iodpfxezx R Ako Amgsih - N.2 upper drilling units, each consisting of: - 2 vertical 36-spindle heads (72 in total per unit) - 1 vertical 14-spindle heads (on the Y-axis) for fittings - 2 horizontal spindles (4 in total per unit) on the Y-axis - N.2 heads with 3 vertical spindles (for hinges) - N.2 horizontal units (1 R + 1 L) with N.2 21-spindle heads (21 + 21 = total 42) per unit 238400D) Stacker (Bridge Frame) "MAHROS", single station Mod. Runner

Condition: excellent (used), CNC Flexible Automatic through-feed DRILLING LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CDL B) 1° Motorized Roller table "MAHROS" with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) S - N° 6 mobile consoles (workbenches) controlled by CN on the X-axis - N° 4 upper drilling units Isdpfx Amjzxn N Iogoih - N° 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" with 90° motorized belts (from longitudinal to transverse) F) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SDL, with "WANDRES" panel cleaner

Condition: used, Overall height 320cm Arm length 350cm Manual rotation 360° Ventouse gantry 220cm/120cm Adjustable in length and width 8 suction cups of 30 cm diameter Iiedpezyfxcofx Amgoh Maximum lifting height ± 140 cm Minimum ground clearance +- 10cm Lifting capacity 175kg Electrical rise and fall Manual rotation 380V

Condition: excellent (used), CNC Flexible through-feed DRILLING, ROUTERING AND DOWEL INSERTING LINE Min/Max workpieces (panels) width (X axis) with Author 924: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 924: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 924: mm 100 /1600 (o 800+800) 200027A) Loader (Bridge Frame) "MAHROS" double station, Mod. Runner (max mm 1300) 200027B) Connection transfer unit "MAHROS" (90°) 200027C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 924 - N.4 Vertical electro-spindles (on the Y-axis) (Kw 6,6 ca.) Iiedpfx Amozza Nlegsh - N.4 upper drilling units, each consisting of: - 1 vertical 36-spindle head - 8 (4+4) horizontal spindles on the Y-axis - 1 vertical 14-spindle heads (on the Y-axis) for fittings - N.2 horizontal units (1 R + 1 L) with N.1 21-spindle drilling head (2x21 = total 42) per unit - N.2 horizontal units (1 R + 1 L) with N. 6-nozzle injection head (2x6 = total 12) 200027D) Connection transfer unit "MAHROS" (90°) 200027E) Stacker (Bridge Frame) "MAHROS", double station, Mod. Runner (max mm 1300)

Condition: used, machine/vehicle number: 008430, Position 1: Panel Feeding and Loading MAHROS + STEFANI-RUNNER + EVOLUTION Isdpoyqxx Sofx Amgjih Position 2: Double Sided Squaring/Edgebanding Machines MAHROS + STEFANI-RUNNER + EVOLUTION Position 3: Panel Stacking and Offloading MAHROS + STEFANI-RUNNER + EVOLUTION

Condition: used, machine/vehicle number: 005608, Position 1: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE Position 2: Single Edgebanders STEFANI + MAHROS-EVOLUTION SB ONE Position 3: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE Position 4: Single Edgebanders STEFANI + MAHROS-EVOLUTION SB ONE Position 5: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE Iiedpsiii Izsfx Amgsh

Condition: ready for operation (used), Year of construction: 2018, load capacity: 25 kg, arm reach: 3,089 mm, number of axes: 6, This 6-axis Yaskawa Motoman GP25 robot arm was manufactured in 2018. It features a maximum payload of 25 kg and a horizontal reach of 1730 mm, along with a vertical reach of 3089 mm. If you are looking to get high-quality automation capabilities, consider the Yaskawa Motoman GP25 robot arm we have for sale. Contact us for further details. • Horizontal reach: 1730 mm • Vertical reach: 3089 mm Ijdpfx Asz Tpcdjmgjih • Manipulator weight: 250 kg • Country of manufacture: Japan • Controller: Yaskawa YRC1000 • Controller type: ERAR-1000-06VXH25-E10 • Controller manufacturing date: November 2018 • Power supply: Three-phase, 380–440 V AC, 50/60 Hz • Controller weight: approx. 70 kg

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) Iodpfx Ajzxc Ncemgoih G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: used, machine/vehicle number: 007234, Max. panel width: 900 mm Max. panel length: 1200 mm Length of conveyor: 8000 mm Introduction system: with grippers Iedpfx Aewlpnnjmgsih

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Iiodpfsyywi Aox Amgoh Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: used, Double picking station feeder. Designed to serve production lines of drilling, squaring, edging, Ijdpoqvt Ecsfx Amgsih squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process Working dimensions: * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system TECHNICAL DETAILS TO BE CHECKED

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 250 kg, load capacity: 25 kg, controller manufacturer: Yaskawa, controller model: YRC1000, teach pendant manufacturer: Yaskawa, Equipment: documentation/manual, Industrial robot YASKAWA GP 25 Control unit YRC 1000 This robot was only used as a demonstration robot. Only about 600 operating hours. Ready for collection. Iisdpfxoxb T Sys Amgeh

Year of construction: 2007, condition: not inspected (used), functionality: unexamined, total length: 5,700 mm, total width: 1,000 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 800 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 800 mm Minimum panel length: 140 mm Maximum panel length: 2,000 mm Conveyor length: 5,700 mm MACHINE DETAILS Dimensions (L x W): 5,700 x 1,000 mm Return of parts to edge banding machine: Left Panel outfeed: via air cushion table Panel feed: via motorized conveyor belt EQUIPMENT Iisdpfx Asyzzhxjmgeh CE Safety Standard The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6200

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Ijdpfxox Nv S Us Amgeih Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Canon imagePROGRAF GP-4000” production system. Item for sale: Iedpfx Aezb Akgjmgeih 1 x Canon imagePROGRAF GP-4000 Meter readings: Total: Approx. 4512.7 (m2) Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, Double storage station stacker. Designed to serve production lines for drilling, squaring, edging, squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process. Ijdpfxoqvt D Ue Amgsih Working dimensions: * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system TECHNICAL DETAILS TO BE CHECKED

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,200 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 39 A, number of spindles: 9, pass-through width: 1,000 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are pleased to offer our premium deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable company with extensive experience in the production of metalworking and woodworking machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and operator-friendly solutions tailored to the needs of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. Iijdpewztn Dsfx Amgeh The GP 1000 2Z is an outstanding, versatile deburring machine designed for cleaning sheet metal after various cutting processes. This model is fitted with two ‘Z’-type oscillating and rotating heads. What does this mean in practice? It allows for two operations to be performed simultaneously: not only does it efficiently remove scale after plasma cutting, but it also deburrs and rounds off the edges of workpieces following laser cutting. The broad range of working thicknesses and widths of up to 1,000 mm make it possible to process both small and large components. With suitable tooling, the machine is also capable of heavy edge rounding and oxide removal. The GP 1000 2Z deburring machine features a TFT touch-screen control panel, enabling the operator to continuously and precisely manage machining parameters such as workpiece height, feed rate, and tool rotation speed.

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Iiodjtt Dqpepfx Amgsh Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, single-girder crane, including steel structure with floor control. Dimensions of the steel structure approx. 7.5 x 4 m with 1x Demag bridge crane, 2 tons. Payload/lifting capacity: 2000 kg - 2 tons. Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams. Length of steel structure approx. 6 m Length of running rails approx. 7.5 m Total width of steel structure approx. 4 m Total height of crane approx. 4.64 m Top of running rails approx. 4.4 m Bottom of running rails approx. 4.15 m Hook height approx. 3.2 m Base plates at the supports approx. 40 x 40 cm. Iijdpfxoz Tdb Uj Amgjh System is delivered complete: Steel structure/supports made of HEB160 (embedded approx. 10 cm), running rails IPE300 incl. power rail/power supply. 1x single-girder crane with 2000 kg Demag PK10 chain hoist with floor control. Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection by appointment only.