Used Maka Ap 70 for sale (15,103)

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Pjdpfsv Rlpyex Ai Degr Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Psdpfxjvr A A Ts Ai Dsgr Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: used, mileage: 42,000 km, power: 118 kW (160.44 HP), fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, Number of doors: 4 Year of manufacture: 2023 Cab: double VAT/margin: VAT qualifying = Additional options and accessories = - Airbag - Alarmsysteem class 1 - Camera system - Electrically adjustable exterior mirrors - Electrically operated windows - Lane Assist - Outside temperature display - PTO - Rear air suspension - Reversing camera = Remarks = 7-person version with the Insoli System. LIKE NEW. Pjdpszh It Ssfx Ai Dsgr

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm Pgsdpfxszuw Ixj Ai Dor - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Cooling: Water cooling Pgjdpfsy S Hahox Ai Der Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics Psdsvmpx Rjpfx Ai Djgr - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Pjdpfxevmywqo Ai Djgr Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 21017403, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, number of slots in tool magazine: 32, controller manufacturer: BWO 900C, overall weight: 8,000 kg, year of last overhaul: 2024, spindle motor power: 12,500 W, mount diameter: 90 mm, number of spindles: 1, rotational speed (max.): 17,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Pgodouyl Npspfx Ai Djr

Condition: used, Year of construction: 2013, operating hours: 6,226 h, load capacity: 4,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final confirmation, errors, typographical errors, and prior sale: Still reach truck R-70-40 with triplex mast Manufactured in 2013 6,226 operating hours UVV inspection valid until 08/2027 Transmission: 20 km/h VW engine, diesel/electric 55 kW / 75 hp 2 work lights at the rear 2 work lights at the top front + 2 in the center 1 double acting hydraulic cylinder at the front Load capacity: 4,000 kg Unladen weight: 6,421 kg Load center: 500 mm Turn signals Windshield wiper Fixed cabin with glass windows Tires 250-15 (250/70-15), front approximately 50% remaining tread, rear approximately 40% remaining tread Towing eye at the rear Psdezw R T Hepfx Ai Degr Price: €14,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, 1 unit of a DAF XF truck with a roll-off tipper / hooklift system for GERGEN JUNG GRK 21/70 Apollo containers Vehicle type: Truck Body type: Truck for ATL with roll-off system Manufacturer: DAF Truck Type: AT First registration: 06/02/2010 Mileage: 389497 Fuel: Diesel Rated power: 375 kW / HP: 510 Engine displacement: 12902 Psdpfjzvdhbjx Ai Degr Official license plate: FN AO 9000 TÜV (technical inspection): 12/25 Number of vehicle keys available: 1 General condition: as per images and inspection Equipment: as per images and inspection Available vehicle documents: Registration certificate I: yes Registration certificate II: yes Color: as shown in the images, as per images and inspection Vehicle ID XLRAT48MS0E873575 Condition: used Location of the goods: storage area near the turning plate Payment method: prepayment by bank transfer Shipping: Self-collection only from the Tettnang location Sales option: The vehicle is sold as is, without inspection, and in a de-registered condition. As there is no insurance coverage, the vehicle must be transported with a different axle or with red license plates.

Condition: used, total length: 1,410 mm, empty load weight: 423 kg, construction height: 1,060 mm, construction width: 2,150 mm, Bulk material bucket Pjdpfx Aiewlxgts Djgr

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Year of Manufacture: 2018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters For sale is a used Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber with touchscreen control. The testing chamber was developed for professional temperature and climate testing and is ideally suited for environmental simulations, material testing, quality assurance, research, as well as development and stress tests. Pgjdszrwyijpfx Ai Dsr Technical Data: Type: ClimeEvent C/340/70/5 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 7 K/min Temperature Change Rate (Cooling): approx. 7 K/min Max. Heat Compensation: approx. 3000 W Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Humidity Deviation (Time): ±1 to ±3 % RH Temperature Deviation (Climate Mode): ±0.1 to ±0.3 K Temperature Homogeneity (Climate Mode): ±0.5 to ±1 K Refrigeration System: Refrigerant: R449A / R23 Refrigerant Quantity: 2.50 kg / 0.75 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Dimensions: External Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal Dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: Touchscreen Control Stainless Steel Interior Large Viewing Window Interior Lighting Water-Cooled Version Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Accessories as Shown in Pictures Shipping Data: Shipping Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Shipping Weight: approx. 650 kg Condition: Used Optical condition as shown in pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: • Functional check and replacement of necessary components • Refilling with legally compliant refrigerant if necessary • Leak test with certificate • Documented test run after successful inspection. Availability: upon agreement. Scope of delivery as pictured. Subject to change, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Year of Manufacture: 2018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters For sale is a used Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber with touchscreen control. The testing chamber was developed for professional temperature and climate testing and is ideally suited for environmental simulations, material testing, quality assurance, research, as well as development and stress tests. Technical Data: Type: ClimeEvent C/340/70/5 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 7 K/min Temperature Change Rate (Cooling): approx. 7 K/min Max. Heat Compensation: approx. 3000 W Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Humidity Deviation (Time): ±1 to ±3 % RH Temperature Deviation (Climate Mode): ±0.1 to ±0.3 K Temperature Homogeneity (Climate Mode): ±0.5 to ±1 K Refrigeration System: Refrigerant: R449A / R23 Refrigerant Quantity: 2.50 kg / 0.75 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Dimensions: External Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal Dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: Touchscreen Control Stainless Steel Interior Large Viewing Window Interior Lighting Water-Cooled Version Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Accessories as Shown in Pictures Shipping Data: Shipping Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Shipping Weight: approx. 650 kg Condition: Used Optical condition as shown in pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: • Functional check and replacement of necessary components • Refilling with legally compliant refrigerant if necessary • Leak test with certificate Pjdpfx Aiezrtz As Djgr • Documented test run after successful inspection. Availability: upon agreement. Scope of delivery as pictured. Subject to change, errors and prior sale.

Condition: used, functionality: not functional, Year of construction: 2007, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, fork carriage width: 2,100 mm, empty load weight: 10,784 kg, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Standard Technical condition: Used for spare parts Front tire type: Superelastic Pedpfx Aeza Iy Dei Djgr Front tire size: 355/65-15 Rear tire type: Superelastic Rear tire size: 3.00-15 Description: R70-70 - Forklift for spare parts Full cabin Forklift for spare parts

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber -70 °C to +180 °C | Year of Manufacture 2018 Description: For sale is a high-quality climate testing chamber from Vötschtechnik GmbH, model ClimeEvent C/340/70/5, year of manufacture 2018. This unit is suitable for demanding temperature and climate tests in laboratories, research institutions, development departments, and industrial quality assurance. Thanks to the large test chamber, the powerful refrigeration unit, and the precise temperature and humidity control, the system is ideal for material, electronics, and long-term testing. The water-cooled design ensures reliable operation even under high power requirements. Technical Data Manufacturer: Vötschtechnik GmbH Model: ClimeEvent C/340/70/5 Type of Equipment: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate: Heating: approx. 7 K/min Cooling: approx. 6.7 K/min Maximum Heat Compensation: approx. 3,000 W Temperature Deviation (over time): ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range: Temperature: +10 °C to +95 °C Humidity: 10 to 98 % RH Dew Point: -3 °C to +94 °C Refrigerant: R449A – 2.50 kg R23 – 0.75 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Design: Water-cooled Dimensions (approx.): External: 1,830 × 900 × 1,890 mm (H × W × D) Internal: 750 × 580 × 765 mm (H × W × D) Weight: approx. 650 kg Equipment: Color touchscreen control Stainless steel test chamber Internal lighting Large viewing window Water-cooled refrigeration unit Side cable entry Multiple shelf levels Ethernet interface USB interface Extensive accessories as shown in the photos Areas of Application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Automotive Aerospace Research & Development Pjdpfx Ajzquaksi Djgr Quality assurance Aging and stress tests Condition Used. The unit is in good condition with normal signs of wear and tear, consistent with its age. Scope of Supply: Vötschtechnik ClimeEvent C/340/70/5 Accessories as shown in the pictures Service Shipping: Inspection is possible at any time by appointment. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder is possible for an additional charge. Subject to prior sale and errors.

Year of construction: 2019, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Test Chamber -70 °C to +180 °C | Year of Construction 2018 Description: For sale is a high-quality climate test chamber from Vötschtechnik GmbH, model ClimeEvent C/340/70/5, year of construction 2018. The system is suitable for demanding temperature and climate tests in laboratories, research institutions, development departments, and industrial quality assurance. Thanks to the large test chamber, the powerful refrigeration unit, and the precise temperature and humidity control, the system is ideal for material, electronics, and long-term tests. The water-cooled design ensures reliable operation even under high performance requirements. Technical Data Manufacturer: Vötschtechnik GmbH Model: ClimeEvent C/340/70/5 Type of Equipment: Climate Test Chamber / Temperature Test Chamber Year of Construction: 2018 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate: Heating: approx. 7 K/min Cooling: approx. 6.7 K/min Maximum Heat Compensation: approx. 3,000 W Temperature Deviation Over Time: ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range: Temperature: +10 °C to +95 °C Pgedpfsznvxisx Ai Dor Humidity: 10 to 98 % RH Dew Point: -3 °C to +94 °C Refrigerant: R449A – 2.50 kg R23 – 0.75 kg Power Connection: 3/N/PE AC 400 V ±10 %, 50 Hz Rated Power: 8.6 kW Rated Current: 21 A Sound Pressure Level: approx. 57 dB(A) Design: Water-cooled Dimensions (approx.): External: 1,830 × 900 × 1,890 mm (H × W × D) Internal: 750 × 580 × 765 mm (H × W × D) Weight: approx. 650 kg Equipment: Color Touchscreen Control Stainless Steel Test Chamber Interior Lighting Large Viewing Window Water-Cooled Refrigeration Unit Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Extensive Accessories as Shown in Photos Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Automotive Aerospace Research & Development Quality Assurance Aging and Stress Tests Condition Used. The device is in good condition with typical signs of wear and tear consistent with its age. Scope of Supply: Vötschtechnik ClimeEvent C/340/70/5 Accessories as Shown in Images Service Shipping: Inspection by appointment is possible at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder is possible for an additional charge. Subject to prior sale and errors.

Condition: used, functionality: fully functional, machine/vehicle number: W41173G04119, Year of construction: 2016, operating hours: 170 h, load capacity: 2,000 kg, lifting height: 3,180 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, empty load weight: 1,660 kg, drive type: Elektro, High lift truck Fahrgestellnummer: W41173G04119 Mast type: Duplex Condition: Reconditioned without warranty Technical condition: very good Pgjdpfx Aiouhw Hts Der Front tires type: Polyurethane Battery Volt: 24V Battery Ah: 300Ah Battery year of construction: 2016 Description: Linde L 20 AP No.: R0322 Year of construction: 2016 Operating hours: 130 The device is visually and technically in good condition. Charger on request Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Wire mesh protection External loader Load rollers Tandem access Key switch intg. Scales

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 500 mm, overall weight: 4,050 kg, total height: 2,100 mm, product length (max.): 2,950 mm, This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, it's ideal for precise bending operations. Contact us for more information about this machine. • Bending force: 70 tons • Bending capacity (steel 400 N/mm² over full length): 3 mm • Distance between uprights: 2,100 mmSpeeds • Down speed: 90 mm/s • Working speed (bending): 8 mm/s • Return speed: 70 mm/sAxes Pgsdpfx Aisya D U Ro Dsr • X-axis speed: 250 mm/sSafety & equipment • Finger protection system (spaced pads): 2 units • Table supports: 2 unitsHydraulics & power • Oil tank capacity: 180 liters • Main motor power: 5.5 kWTooling / geometry • Ram stroke: 185 mm • Distance between prism table and ram: 380 mm • Throat depth: 310 mm • Table height: 800 mm • Table width: 110 mm Technical Specification Bending Length 2550 mm

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: gas, color: orange, empty load weight: 6,446 kg, maximum load weight: 4,500 kg, first registration: 01/2016, Year of construction: 2016, driver cabin: other, Vehicle location: Bovenden, Body: counterbalance forklift with pallet forks, approx. 8,032 operating hours, LPG forklift, max. load capacity 4,500 kg, unladen weight 6,446 kg, full cab. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Pedpsxbfyisfx Ai Dogr

Condition: used, Technical details: Pgodpfx Asu Ni Disi Djr floor-plate length: 3160 mm plate width: 2700 mm plate height: 410 mm Plate thickness: 410 mm weight of the machine ca.: 8,0 t Clamping plate for sale Material cast steel/profiled cast iron Finished surface T-slots according to DIN 650: a=41.5; h=72.0; b=70.0; c=28.5 mm Center stand 300 mm 11x through holes Ø 32 x 60 mm 2x fixing holes at the front Ø 41 mm *

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm Pgodpfou N D Dwox Ai Djr very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 700 mm plate height: 85 mm weight of the machine ca.: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm Pedpfx Aiou N Dyrj Dogr *

Condition: used, Technical details: table length: 870 mm table height: 420 mm table width: 680 mm Pgedpfx Aieu N Dgxo Djr weight of the machine ca.: auf Anfrage t dimensions L x W x H: 0,91 x 0,71 x 0,42 mit Untergestell m Central hole Ø 180mm T-groove in accordance with DIN 650: a=22mm; h=38mm; b=40mm; c=16mm with foot support *

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 10,300 h, load capacity: 8,000 kg, lifting height: 5,100 mm, fuel type: diesel, construction height: 2,860 mm, fork length: 240 mm, Equipment: air conditioning, cabin, FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, Ready for immediate use - operational (internal no. 77) RX 70-80 4-wheel diesel forklift Used Year of manufacture: 2019 Current technical condition report available upon request! This offer is aimed exclusively at businesses, dealers, public sector and church institutions! Serious inquiries only, please!! We offer various items acquired from liquidations and similar, which we describe as accurately as possible and provide with detailed photos. Further details about the item cannot be provided. Unless otherwise explicitly stated, this offer refers to used equipment. Item is non-operational and shows signs of previous use. Existing defects will be gladly discussed by phone. All items offered ex stock 47441 Moers. If shipping is required, please contact us to discuss packaging and shipping costs. Manufacturer: STILL Model: RX 70-80 Capacity: 8,000 kg Lift height: 5,100 mm Roof rack Air conditioning Pgsdpfxowyl Rns Ai Dor Heater Full cab Double fork positioner Fork length: 240 cm, double fork set Suitable for handling 4 Euro pallets simultaneously Year of manufacture: 2019 Operating hours: approx. 10,300 Own weight: 15 tons Overall height: 2,860 mm For more data, please see photos. Additional industrial trucks in stock!! Viewing possible by appointment on Tuesdays and Thursdays between 9 am and 4 pm by telephone arrangement. If required, item can be collected immediately. All dimensions are approximate. General note for all offers: All details subject to change - photos are for reference only!!

Year of construction: 1967, condition: good (used), Overhauled in 2000, hydraulics and electrical system updated, table dimensions 3600x400. Pgjdpfxjlml Dre Ai Djr