Used Manea Artima 250/S for sale (74,119)

Condition: good (used), Year of construction: 1981, HOT PRESS PLATE DIMENSIONS: 2500 X 1300 MM HEATING OF THE PLATES BY HOT WATER 6 HYDRAULIC CYLINDERS FROM THE BOTTOM SIDE Pjdpfx Ajwup U Hjdxogr MAX. OPENING BETWEEN PLATES: 450 MM TOTAL PRESSURE: 120 Tons GOOD CONDITION

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Psdpfx Asu Dxb Tjdxogr Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Pgsdpfx Adoxgiaqoxjr Clamping force: 25 tons Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 cc Injection weight: 36 g for PS Equipment: Conveyor belt, sprue picker, core puller, Euromap Fully inspected! PRICE REDUCED FROM 6500 TO 5500 EUR!!!

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Podpfx Adozwk Dfjxogr Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Pgjdszub Hrspfx Adxor Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Year of construction: 2006, operating hours: 40 h, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 4292-1-197652, Gerstenberg Schröder Consistator MD 250 L-S For sale is a used Gerstenberg Schröder Consistator MD 250 L-S scraped surface heat exchanger from a production facility. The unit was used for processing vegetable juice and is being sold due to process changes and restructuring. Technical Data Manufacturer: Gerstenberg Schröder Type: Consistator MD 250 L-S Year of Construction: 2006 Serial Number: 4292-1-197652 CE Marking: CE 0038 Design: Scraped Surface Heat Exchanger Product Side Medium: Vegetable juice Pressure Range: 0 / 35 bar Test Pressure: 59 bar Max. Temperature: 150 °C Volume: 25 liters Media Side Medium: Steam Pressure Range: 0 / 13 bar Test Pressure: 28 bar Max. Temperature: 165 °C Volume: 75 liters Condition The machine is used and comes from an industrial production environment. Inspection is possible by prior appointment. Location Pgjdpezwwibofx Adxer 71106 Magstadt, Germany Sale Sale from location / Ex Works. Loading and transport are to be arranged by the buyer, or can be arranged upon agreement. If you are interested or have any questions, further information, pictures or details can be provided.

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Pgedpfszfp Hhjx Adxjr

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Pedpfovl Skgex Adxjgr Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Psdpoywzv Iefx Adxjgr Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering a very well-maintained DURST P5 250 WT digital printing machine, manufactured in 2022, for sale. Manufacturer: DURST Model: DURST P5 250 WT Podpfxozwdibs Adxsgr Year of manufacture: 2022 Condition: Very good Machine type: Industrial multi-pass digital printing machine Description: The DURST P5 250 WT represents a new generation of digital printing machines, equipped with Durst Water Technology. This system enables printing with low-odor or odorless water-based inks and is ideally suited for the production of packaging and displays made of corrugated cardboard. Durst WT inks do not contain any substances that are hazardous to health and meet the stringent requirements for occupational safety. The system is equipped with recirculating Durst Quadro Array print heads and WT inks. The additional ink recirculation behind the nozzle plate of the print head ensures high availability and reliability. Technical data: Material: A wide range of uncoated and coated corrugated cardboard qualities Sheet size: min. A3 (297 × 420 mm) to max. 2,500 × 3,200 mm Resolution: 1,000 dpi Maximum speed: 345 m²/h Average speed: 200 m²/h Average output at 2,440 × 1,220 mm: approx. 67 sheets/h Print heads: Durst Quadro Array Ink system: Durst Water Technology Printing inks: 6 colors Scope of delivery: DURST P5 250 WT digital printing machine Feeder Stacker Registration table Transport pallet Further information: Very little use No backlog of maintenance due to current service contract Transport pallet available For more information and technical details, please do not hesitate to contact us. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2005, Control Siemens 840 D Powerline Turning length 1185 mm, swing diameter 640 mm Plan route X 1 . 550mm, X 2 . 180mm Longitudinal path Z1 . 1185 mm, Z2. 1050mm Main spindle as integrated spindle motor ISM 65 with 5000 rpm Partial hollow clamping device 68 mm Pedpfx Adolcdcpoxogr C-axis and spindle brake Cross slide at the top with turning and milling spindle as a motor spindle with triple Hirth gearing with 12,000 rpm 1° Indexing for fluid locking when twisting Y axis +- 90mm B-axis +- 120° interpolating with hydraulic clamping Tool magazine with 46 places Absolute direct path measuring systems in all linear axes Coolant tank 600 l with belt filter system chip conveyor, 12-fold star turret with C-axis tool drive Counter spindle as an integrated spindle motor ISM 76, partial hollow clamping device 67 mm with 5,000 rpm Additional coolant pressure of 20 bar for the turning and milling spindle and the star turret Connection for stick vein magazine Tailstock function for the counter spindle Preparation for turret bezel

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Pjdpswlkcajfx Adxogr Payment terms: 100% before takeover of the machine, net

Condition: used, turning diameter over bed / mm Psdpfjzu A T Tox Adxogr turning length / mm centre height / mm

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Pgjdpswz R Iusfx Adxjr Freight basis: ex-works

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. Pgodpezmrf Nofx Adxjr A linear robot is included, but it has never been used and was probably not programmed.

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Pgedpfjzmamusx Adxjr Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Pjdpfx Asxl Tp Tsdxsgr Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Linear robot including peripherals and safety fencing available. A used machine from a site closure is being sold. Sale excludes all warranty claims for defects. Pgjdjzqagiepfx Adxjr The machine has not been inspected but was operational until the end.

Year of construction: 2013, condition: like new (used), functionality: fully functional, Equipment: CE marking, Canopy-enclosed and soundproofed generator set, less than 3,000 operating hours, skid-mounted chassis, Volvo engine. Pgsdezvq Riopfx Adxjr

Condition: good (used), Year of construction: 2010, functionality: fully functional, GALLUS TCS 250 High-End Combination Label Printing Press Manufacturer: Gallus Model: TCS 250 Year of manufacture: 2010 Printing Configuration 8 Printing Units in total: • 6 x Offset Printing Units • 1 x Rotary Screen Printing Unit • 1 x Flexographic Printing Unit Additionally: • 1 x Flexographic Varnishing / Coating Station _____ MACHINE CONFIGURATION Printing Technology The machine combines three different printing technologies within one production line: 6 x Offset Ideal for: • High-resolution graphics • Fine text • Excellent halftone reproduction • Premium label applications • High-quality process colour printing 1 x Rotary Screen Printing Especially suitable for: • High-opacity colours • Opaque white • Special varnishes • Tactile effects • Functional coatings • Premium decorative applications 1 x Flexographic Printing Unit Provides additional flexibility for: • Spot colours • Solid colours • Varnishes • Coatings • Special applications _____ FLEXO VARNISHING STATION The machine is additionally equipped with a dedicated: Flexographic Varnishing / Coating Station Suitable for applications such as: • Full-area varnishing • Protective varnish • Gloss varnish • Matte varnish • Special coatings This provides additional finishing possibilities directly in-line. _____ UV DRYING SYSTEM The machine is equipped with an integrated: UV Drying System Psdezww Rropfx Adxegr The UV curing system allows fast and efficient curing directly after printing and coating. This supports high-quality production on a wide variety of label substrates. _____ CORONA TREATMENT Included: Corona Treatment Unit The Corona system improves surface tension and therefore ink and coating adhesion, particularly on filmic and non-absorbent substrates. _____ WEB GUIDING The machine is equipped with: Automatic Web Edge / Web Guiding System This ensures stable and accurate web transport throughout the complete printing and finishing process.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45069, overall weight: 32,000 kg, For sale is a used machine from a site closure. Pjdpozrd U Hsfx Adxsgr Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. Podpozwhaqjfx Adxegr In the folded position, the open angle is approximately 32° vertically.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Psdozu Ryhepfx Adxogr Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 300 h, The price includes the machine from the demo center, plus an additional container and a second build platform. - Build volume: 250*250*250 - Scan speeds up to 12 m/s - Layer thicknesses starting from 0.05 mm - Accuracy of +/- 0.1% across the part length - Granite recirculating frame - Control of key operating parameters - Pump-fed refill capability - High-performance vacuum recoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB, and Panasonic. The machine features an open material platform – consumables from all manufacturers can be sourced and processed directly. Pgjdpfxohvim Es Adxer Transport, commissioning, and consumables are not included in the price. The local UnionTech partner will handle assembly, training, and service!

Year of construction: 1988, condition: used, functionality: fully functional, PAAL RS 40/250 paper roll saw, Manufactured by Paal’s Packpressen-Fabrik in Germany. The machine is designed for cutting paper rolls and is suitable for industrial paper processing applications. Technical specifications: Manufacturer: Paal’s Packpressen-Fabrik Model / Type: RS 40/250 Year of manufacture: 1988 Machine number: 24458 Motor power: 17 kW Rated current: 34 A Voltage: 380 V Frequency: 50 Hz Psdpfx Adsxu A U Dexjgr Weight: 2,350 kg Condition: Used Price: €7,000 The machine is available for inspection. Category: Paper, cardboard & foil processing machinery → Cutting machinery Keywords: PAAL RS 40/250, paper roll saw, paper roll cutting machine, roll cutting machine, paper processing machinery, Paal’s Packpressen-Fabrik, paper rolls.