Used Mark Msa 15 500Ad for sale (19,434)

Condition: used, Year of construction: 2012, Screw compressor MARK MSA 15 Max. operating pressure: 10 bar Complete with refrigerant dryer and 500 L compressed air tank Weight: 445 kg Hedpoycfxvofx Ab Nenl Motor: 15 kW Air delivery: 119 m³/h Connection: 400 V, 3-phase

Condition: excellent (used), Year of construction: 2015, operating hours: 1,884 h, PROD. BRAND TYPE MSA 15 500AD2000 S/N CAI857781 YEAR 2015 POWER (kW) 15 CAPACITY (m3/min) 1.79 PRESSURE (bar) 10 HOURS (LOAD/TOTAL) 1884/8665 FREQUENCY INVERTER no BUILT-IN DRYER yes Hodpfjyi A Arox Ab Njnl HEAT EXCHANGER no COOLING (AIR/WATER) air ON TANK yes, 500 l DOCUMENTATION yes NEW/USED USED

Condition: excellent (used), Year of construction: 2015, volume flow: 1.79 m³/h, pressure (min.): 10 bar, MARK MSA 15 screw compressor Mounted on 500 L pressure vessel With refrigeration dryer 15 kW motor Capacity: 1.79 m3/min Pressure: 10 bar Operating hours: 14,100 Compressor fully functional Hnedpfx Abjyui Acs Nsl

Condition: excellent (used), Year of construction: 2012, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK MSA 15 IVR screw compressor Hsdpsv A U I Aefx Ab Nonl Variable speed (inverter) 15 kw engine Efficiency 2.2 m3/min Pressure 8 bar Mileage 11285 mtg Fully functional compressor

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Hsdpfx Ajy H N Tmjb Nonl Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 2021, S015464 MANUFACTURER: MARK MODEL: MSM 15 Hnsdpfx Absyh Rx No Nel SERIAL NO.: ITJ514259 YEAR: 2021 POWER (kW): 15 CAPACITY (m³/min): 1.68 PRESSURE (bar): 10 OPERATING HOURS (LOAD/TOTAL): 948/1868 FREQUENCY INVERTER: no BUILT-IN DRYER: no

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, volume flow: 100.8 m³/h, pressure (max.): 10 bar, type of cooling: air, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM15D TM500 S/N ITJ874646 YEAR 2024 CAPACITY (kW) 15 OUTPUT (m3/min) 1.68 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK Hnjdpfjvrcnvox Ab Nsl DOCUMENTS YES NEW/USED NEW

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options Hnodpfx Abjy Rrywj Njl - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, spindle speed (max.): 4,200 rpm, table load: 35,000 kg, CNC SELCA 4040 DH Maximum drilling depth in single cycle, V axis: 1,500 mm Column, longitudinal travel X axis: 3,250 mm Vertical travel Y axis: 1,500 mm Drilling slide, workpiece support movement W axis: 500 mm Maximum workpiece height: 2,400 mm Clamping table and workpiece approach movement U axis: 1,000 mm Controlled radial resolution, B axis: 360,000 divisions/rev Clamping table, rotating surface size: 1,600 x 1,800 mm Clamping table, max load with rotating workpiece: 20,000 kg Standard T-slot size: 22 mm Minimum–maximum solid drilling diameter: 5 – 50 mm Rapid feed rate, adjustable max speed: 8,000 mm/min Drilling spindle rotation speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 15 kW Gun drill tool holders: Shank for drill Ø < 6 mm: Ø 10 x 40 mm Shank for drill 6 mm < Ø < 25 mm: Ø 25 x 70 mm Shank for drill Ø > 25 mm: Ø 40 x 70 mm Dimensions and weights Width x Length x Height MF 1500 BB: 5,900 x 7,600 x 3,850 mm Total weight: 42,000 kg Oil tank capacity: 600 – 1,200 liters WORK SLIDE TILTING Minimum / maximum vertical inclination – A axis: +20° / -20° Continuous controlled radial resolution: 0.001° MILLING HEAD – ISO 50 spindle connection Max horizontal working stroke – Z + W axes: 1,000 mm Column longitudinal travel – X axis: 3,250 mm Drilling slide vertical travel – Y axis: 1,500 mm Spindle rotation speed, adjustable max: 2,500 rpm Spindle power (S1 duty): 17 kW Maximum spindle torque: 680 Nm ROTO-TRANSLATING CLAMPING TABLE Max clamping surface: 2,000 x 2,000 mm Max horizontal travel – U axis: 1,000 mm Continuous controlled radial resolution: 0.001° Hnedpfx Aboyymdie Nol Max rotating workpiece load: 35,000 kg Standard T-slot size: 22 mm Machine complete with: • Remote electronic handwheel • ISO 50 tool changer magazine with 10 positions • Many tools and working equipment • Rack with various drills • User manual, maintenance manual, and CE conformity declaration

Year of construction: 2020, condition: used, Bell-Mark Thermal Printer RF Pouch Printer, Type East Print 111 128, Model No. EP41015R, prints full rear bag artwork including barcodes to clear scannable quality. S/No. 20572763 (2020). Country of Origin: U.S.A. Hsdpfey Rzrisx Ab Nonl Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 627 mm, total length: 830 mm, total width: 630 mm, Tested forklift battery for your truck – 48V 5PZS 500Ah – DIN A + 1 year warranty + Incl. aquamatics (automatic water filling system) + Incl. end cell connector & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 830 mm Width 630 mm Hsdpfxjy Rnm Hs Ab Nonl Height 627 mm Weight: approx. 910 kg Suitable for the following models (among others): Linde E 18 – 386-02 – side battery change Still R 20-15 Jungheinrich EFG V 16 Jungheinrich EFG 213 Jungheinrich EFG 215 Manitou ME 316 Other common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 752 mm, total length: 890 mm, total width: 606 mm, Tested forklift battery for your truck – 48V 5PZS 500Ah – special battery tray + 1 year warranty + incl. aquamatic system + incl. end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 890 mm Width 606 mm Height 752 mm Weight: approx. 930 kg Suitable for the following models and others: Still RX 20-15 Still RX 20-20 Hodpfxey Rnmye Ab Nonl Still RX 20-20 P Toyota 5FBE15 Bendi B40/48E-180D Caterpillar EP16N Doosan B20X-5 Hyundai 18BT-9 JAC CPD25 Manitou ME 318 Mitsubishi FB16KT Nichiyu FBT80 Common battery sizes available, feel free to inquire. Transport possible.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 630 mm, total length: 1,025 mm, total width: 525 mm, Tested forklift battery for your truck – 48V 5PZS 625Ah – DIN B + 1 year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity report is provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 525 mm Height 630 mm Weight: approx. 890 kg Hsdey Rnmgopfx Ab Nonl Suitable for the following models and more: Still FM 20 Still R 20-15 Still RX 20-14 Still RX 20-15 Still RX 20-16 Still RX 20-18 Still RX 20-20 Still RX 20-20 P Jungheinrich EFG Heli CPD 18 Mitsubishi FB18KT Utilev UT20PFH Common battery sizes available, please enquire. Transport possible.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Hsdpfxjy Rnlco Ab Nonl Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Hnodpjy Rnk Eofx Ab Njl Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged.

Condition: refurbished (used), battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 519 mm, Tested forklift battery for your forklift - 48V 4PZS 500Ah - DIN A + 1-year warranty + Includes Aquamatik (automatic electrolyte filling system) + Includes end cell connector & REMA 320 plug (other plugs can be installed upon request) + Capacity: minimum 90-100% (C5 capacity report provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 519 mm Height 625 mm Weight: approx. 710 kg Suitable for the following models and more: Linde E 12 - 386-00 Linde E 14 - 335-00 Linde E 14 - 386-00 Linde E 14 - 386-02 – side battery change Hnodpfx Absy Rnklo Nol Linde E 15 S - 335-00 Linde E 16 - 386-00 Linde E 16 C - 386-00 Linde E 16 C - 386-02 – side battery change Linde E 16 L - 335-00 Linde E 18 - 386-02 – side battery change Linde E 18 C - 335-00 Linde E 20 L - 386-00 Linde T 30 R - 143-00 Still FU-X 20 Still R 20-14 Yale ERP 15 VT Yale ERP 16 VT Jungheinrich EFG Jungheinrich EFG 110 K Jungheinrich EFG 213 Jungheinrich EFG 215 Jungheinrich EFG 216 K Jungheinrich EFG 312 Jungheinrich EFG DF 16 Jungheinrich EFG W 1 Jungheinrich EKE 20 Toyota 7FBEST10 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota/BT C3E120 Toyota/BT CBE 1.2 Toyota/BT CBE 1.5 Toyota/BT SSE 135 Crown 3 Crown RT 3000 Crown SC 1016 Crown SC 1018 Crown SC 3210 Crown S6 5320-1 Crown SCT 6020 Balkancar EV698 Caterpillar EP13PNT Caterpillar EP15PNT Cesab 5 Cesab B315 Cesab B315A Cesab CBE1 Clark GEX16 Clark SC5310-1.3 Clark TM 16N Hyster J1.5XNT SW Komatsu FB15M Mitsubishi FB13PNT Mitsubishi FB15PN Mitsubishi FB15PNT OM-Pimespo-Fiat XE 15 OM-Pimespo-Fiat XE 18 Common battery sizes available upon request. Transport can be arranged.

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Hsdpfx Aey Sfayob Nenl Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Year of construction: 2004, condition: excellent (used), MARK MSC37 37kw Wave Compressor!!! Screw compressor MARK MSC37 IVR (ATLAS COPCO screw stage) machine with inverter Technical data: capacity: 6,08 m3/min; 37KW motor; Hedpfx Aboh Ngc Es Nsnl pressure 8 bar; mileage 12942h!!! 2004; compressor fully operational. net price: 18500zł gross price: 22755zł

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Hnedpfx Ajxmt Eqjb Nel

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler, ideal for residential buildings, small commercial premises or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation within a space-saving design. — Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating units, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. Hjdpfx Abewahhvs Nsnl 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Augers • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers and many more components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: You can find most of our current offers on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Viewing: Viewings can be arranged by appointment at our warehouse. If you are interested, please feel free to contact us – we look forward to helping you find the right solution.

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries Hjdpfx Aoxy S I Rsb Nenl • Integrated thermal printer • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display • Original side and top carrying bags Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services • Medical event coverage • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.

Condition: excellent (used), For sale: professional screw compressor from renowned German manufacturer BLITZ Model: Monsun Pro Eco 15 – industrial unit with excellent build quality, quiet operation, and high performance. Ideal for workshops, production plants, paint shops, and wherever constant and stable air pressure is required. ⸻ TECHNICAL SPECIFICATIONS: • Manufacturer: Blitz • Model: Monsun Pro Eco 15 • Motor power: 15 kW • Working pressure: 10 bar • Capacity: approx. 2.0 m³/min Hodpfxoy A Tp Ro Ab Nenl • Speed: 1500 / 3000 rpm • Year of production: 2011 • Power supply: 400V (3-phase) ⸻ OPERATING HOURS: • approx. 17,954 h ⸻ EQUIPMENT: - Control panel - Sound-insulated enclosure - Installation ready for connection - Compact design ⸻ TECHNICAL CONDITION: • Compressor fully functional • Normal signs of wear • Operates correctly ⸻ APPLICATION: • Automotive workshops • Industry • Manufacturing • Paint shops • Service centres

Condition: used, Year of construction: 2012, functionality: fully functional, Horizon SAC-150 Collating System 4 Towers / 60 Bins (2012, Used) Configuration: SAC-150 Collator (4 Towers / 60 Bins) SA-40 Sub Accumulator ST-40 Bypass Stacker Specifications SAC-150 – Modules: SAC-150a (Main Tower) / SAC-150m (Extension Towers) – Number of Bins: 60 Hodpfx Abjy I Hx Ae Nsnl – Sheet Size: Min: 148 × 210 mm Max: 297 × 420 mm – Bin Pile Height: 40 mm – Sheet Weight Range 45 gsm to 135 gsm – Overlap Settings: 4 steps – Power: AC 100V, 50/60Hz SA-40 – Accumulate Size: 140 × 204 mm ~ 350 × 500 mm – Pass Through Size: 120 × 148 mm ~ 350 × 500 mm ST-40 – Sheet Size: 182 × 128 mm ~ 350 × 500 mm – Stack Capacity: 360 mm

Condition: excellent (used), New Cybelec CybTouch 15 cnc touch screen control on our quality used Edwards Pearson 6axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson RTB 100 T / 3100 CNC Pressbrake 3metre x 100ton / 3100mm New Cybelec CybTouch 15 touch screen cnc control that communicates with offline software – offline software for this cnc Cybelec control available 4 axis back gauge – z1, z2, x and r axis – 6axis in total Machine is in good working condition and includes a full length set of upper & lower Pressbrake tooling. Hjdpjq Ewkysfx Ab Nsnl

Year of construction: 2007, condition: good (used), max. compressed air: 13 bar capacity: 390 m³/h max. inside temperature: 55°C Hnjded E S H Eopfx Ab Nol max. outside temperature: 43°C electr. drive: 220 V, 1,64 kW weight: 80 kg space requirement: 600 x 600 x 1000 mm