Used Martin T 26 for sale (74,300)

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Condition: Well-maintained (from a public facility) Design: Hsdpfszmf Iwsx Ahzenp Table size: 1255 x 900 mm Table height: 900 mm Table opening: 305/225/160/105/72 mm Weight: 1150 kg Spindle speeds: 3000/4500/6000/9000 RPM with belt quick-change device Indicators: electronic speed display, digital (LED) for spindle height (absolute and relative), as well as for swivel angle; automatic display of the correction value for the milling depth; dual operating hour counter for total and batch runtimes Milling spindle: electrically swiveling +/- 45, 50° via push button; electric height adjustment with rapid and slow traverse; with steep taper SK 40; collet chuck, quick-change system incl. torque wrench; wear-free, electrically braked; electropneumatic locking via selector switch Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm at 7.5/9.5 kW Milling fence: Milling fence made of aluminum, hard-coated with holder for groove plate or guide rails Handwheel adjustment according to mechanical digital counters, infeed table can be adjusted separately, workpiece diameter max. 250 mm Extraction: two 120 mm diameter connections Maintenance: central lubrication via pump, lubrication of the milling spindle via grease metering device Accessories: milling arbor 30 mm, wrench, torque wrench for collet chuck system, oil press, grease press, ball bearing for infeed ring 62 mm, groove plate, arc milling guard FRS 95 for milling operations on the infeed ring with extraction connection and feed strip Electrical design: lockable main switch, automatic star-delta start, wear-free electric brake, connection for extraction system control, undervoltage protection; CEE three-phase connection for feed device (5-pin socket) Emission values: noise levels according to prEN ISO 11202, workpiece diameter 125 mm, Z=2, n=6000 rpm Workplace emissions: Idle noise (without extraction): 68.6 dB(A) Operating noise (with extraction): 84.6 dB(A) Working on the milling fence - Input side max. 0.34, output side max. 0.28 With slot hood - Input side max. 0.21, output side max. 0.20 Minimum extraction volume for both extraction connections: 24 m³/min at 1000 Pa Special equipment: Model T26, 5/6 kW (6.8 / 8.2 HP) design with CPS - Type Gamma V guard; equipped with Centrex guard; control panel swiveling with control buttons and digital display for milling spindle swivel and spindle up/down, with relative and absolute measurement display and automatic display of the correction value for milling depth during swiveling; necessary if a feed device is installed to the right of the milling fence. Milling fence with retractable mechanical digital counter for total adjustment Integral fence 650 and 500 mm long with extension rod Support for feed device holder (can be swiveled away) with motorized height adjustment (for machine with control panel) Milling arbor SK 40, 30 mm diameter, clamping length 140 mm (200 mm tool diameter) Availability: Short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2000, Robust pivoting milling machine T 26, pivotable from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Pivot angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the pivot angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed fence separately, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Stop with lifting device, pivotable to the side (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Folding stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert strips. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control unit. Comfort stand with electrically height-adjustable feed support, which can be pivoted to the side for machine maintenance and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider". Hjdjzbm Tfspfx Ahzenp

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Hnsdpfezdzbzox Ahzep Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: V 453572, functionality: fully functional, operating hours: 1,770 h, power: 6 kW (8.16 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: AC, spindle diameter: 30 mm, pivoting range: 90 °, rip fence adjustment: motor-driven, actuation type: electric, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 900 mm, table length: 2,405 mm, total length: 3,000 mm, total width: 1,260 mm, total height: 1,800 mm, overall weight: 1,300 kg, year of last overhaul: 2026, Equipment: CE marking, Martin T26 DuoControl Spindle Milling Machine 5/6 kW (6.8/8.2 hp) - 400 V, 50 Hz with neutral conductor in CE configuration with 2-axis control for spindle height and milling fence, electromechanical swivel adjustment with digital display, incl. swiveling control panel with safety device type CPS Gamma V *with milling arbor 40 mm / 160 mm length //Table size: 2405 mm x 900 mm //Table height: 900 mm //Table openings: electric 70 mm - 220 mm //Weight: 1300 kg //Speeds: 3000/4500/6000/9000 rpm with belt quick-change system //Displays: electric speed display Digital (LED) for spindle height (absolute and relative) and swivel angle automatic display of the correction value for the milling depth Dual operating hour counter for total and batch run time //Milling spindle: electrically swiveling via push button +/- 45.50° electrically adjustable in height with rapid and creep feed, with steep taper SK 40, Dornfix quick-change system incl. torque wrench wear-free, electrically braked Electro-pneumatic locking via selector switch //Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm //Milling fence: Aigner integral fence Milling jaws made of aluminum, hard-coated, with mounts for groove board or guide strip Handwheel adjustment with mechanical digital counter Infeed jaw adjustable separately Maximum WZ diameter 250 mm //Extraction: Extraction port 120 mm diameter on the milling fence Extraction port 120 mm diameter Hedpfxozamwuo Ahzonp under the table //Maintenance equipment Central lubrication via pump Lubrication of the milling spindle via grease volume regulator 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil pump 1 x grease pump filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x arc milling guard FRS95 for milling operations on the guide ring, with extraction port and feed strip //Electrical equipment: Lockable main switch, automatic star-delta start, electric brake wear-free Contact for controlling the extraction, undervoltage protection, CEE torque connection for feed unit (= 5-pin socket) Operating push button for direction of rotation selection, motor circuit breaker and winding protection BG test certificate No. 991002 GS wood dust tested No. 991001 EC type-tested No. 991003 Additionally: 1 x Electrically adjustable table opening 1 x Support for feed unit mount, swiveling with motorized height adjustment with control panel 1 x extendable table extension

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Hodpfopgkmwsx Ahzsnp Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: Hsdpfxet U Rn Se Ahzjnp - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Hedpspq If Djfx Ahzonp Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides Hnjdsw D T Dkepfx Ahzjp T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Hnedpjr Hr D Nefx Ahzep Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: used, Used machine Equipment and technical data: - Table size: 800 x 1000 mm Hsdpfxozlbqxo Ahzonp - Diameter of table opening: 480/380/170/125 mm - Taper of milling spindle: MK 5 - Speed of milling spindle: 3000 rpm - Vertical adjustment range of milling spindle: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm - Maximum permissible tool diameter: 250 mm - with wooden clamping jaws (can be replaced with metal clamping jaws upon request) - with Holz Her 3-roller feed device - with heavy-duty sliding table

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch Hedpfeh U A Evex Ahzonp

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Hedjyync Tjpfx Ahzjnp Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: Very well-maintained (from a public facility) Technical features: Table size: 862 x 1504 mm, made of cast iron, incl. standard table extension Table height: 900 mm Rip fence/slider: 3000 mm, made of aluminum Saw blade change: Quick-change system ProLock Saw blade diameter: 250 - 550 mm Hnsdpfezkw Ahox Ahzop Saw blade swivel: +46° to -46° Cutting height: max. 204 mm/saw blade 550 mm; max. 134 mm/saw blade 550 mm at +45° and 125 mm at -45° Motor power: 7.5 kW (10 HP) 400 V-50Hz, Constant speed: 3800 rpm, Infinitely variable speed control from 2000 - 6000 rpm Cutting width: 1100 mm Length stop with 2-point support and two stop elements, fine adjustment with magnifying glass for the inner stop segment, dimension display with scale, length compensation for miter cuts with electric support, additional workpiece support near the saw blade, cutting line 255 - 2025 mm, extendable to 3365 mm Control panel at eye level, can be swiveled away, ergonomically advantageous, adjustable inclination, twice rotatable, incl. template holder Performance features of the control system Touch-screen control panel 10.4" (264 mm) for T 75 Prex Cutting height and cutting angle controlled electronically Cutting width controlled electronically Electromotive positioning of the parallel stop Incl. sensor-monitored safety guard Automatic length compensation "RadioCompens" (length stop) incl. radio-controlled adjustment of the parallelogram cross table Electrically positionable scoring width - scoring saw Electrically positionable scoring height - scoring saw Electrically positionable scoring width left-right - scoring saw Adjustment and digital display of the tool position (cutting height/angle) based on stored tool data Miter cuts and crosscuts with thickness compensation Tool data memory for 50 workdays Automatic referencing of the axes Controlled and manual movement of the controlled axes possible Display for speed and tool diameter Integrated calculator with axis-related memory function, integrated operating hour counter Mitrex double miter fence Miter cutting system "RadioCompens", 2-point support consisting of: digital 2-point length stop, parallelogram cross table with radio connection to the control system (full integration of the table angle as the 5th axis in the control system) Front table 600 x 350 mm, foldable Availability: Short-term Location: Flörsheim

Condition: good (used), Table milling machine Martin T 25. Hjdpfjy Srtmex Ahzonp

Condition: good (used), Year of construction: 2004, Sawblade tiltable 0-45° ° Length of the rolling table 3.000 mm cutting width 1.100 mm Hedpszkl H Iefx Ahzsnp Motor output 5,5 kW Cutting height 170 mm Saw blade diameter 250 - 500 mm Speed 2.800/4.000/5.500 U/min. weight of the machine ca. 1.950 kg

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece -Weight: 2 kg/piece Hedpfx Aeb A I Ulshzenp

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine Hedpewnbfkefx Ahzenp -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm Hjdpohfufgsfx Ahzjnp -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Martin T 65 panel saw Heavy-duty precision panel saw 3.5” LCD color display Motor: 5.5 kW Saw blade can be tilted from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Parallelogram crosscut table for tilting up to 46° on both sides, LCD display, 0.01° fine adjustment for cutting angle Analog length stop with 2-point system Rip fence length: 3,000 mm Cutting width with parallel fence: 1,100 mm Fence adjustment via handwheel Fence position readout via control panel CE version Hnjdpfszkhk Aox Ahzop Year of manufacture: 2012 Machine is WORKSHOP-TESTED and in TOP condition, from a craft business available ex works

Condition: used, Year of construction: 2006, Motor-adjustable parallel fence Lengthwise stop with display Hnsdozawiuspfx Ahzop One-sided motorized pivoting Sliding carriage 3000 mm 5.5 kW Scoring saw Location: Nattheim

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Hnedpfx Ahsy Ahpljzjp Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1978, Spindle tiltable: Yes, 0 - 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Fence jaw adjustment: Manual Hnsdouzkxfopfx Ahzjp Height display: - Swivel angle display: Scale Fence display: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5 kW Motor brake: Yes, foot brake Extraction port: 2 x 100 mm Machine length: 1200 mm Machine depth: 1400 mm Weight: 800 kg

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Hnedpoyi A Tdofx Ahzjp

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, Weight: 1.500 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Tiltable - Manually adjustable axes: Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Incremental Hnodpfxexdlx Rj Ahzop - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, saw blade diameter min. 200 / max. 500 mm Hsdpfxszczf Ej Ahzenp Speed 2800 / 4000 / 5500 U/min.