Used Martz Unilader 300 C 1,3T for sale (62,655)

Condition: new, functionality: fully functional, empty load weight: 265 kg, maximum load weight: 1,035 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,950 mm, loading space width: 1,630 mm, Year of construction: 2026, MARTZ Unilader 300 C 1.3T NEW VEHICLE Internal dimensions: 295 cm x 263 cm Gross vehicle weight: 1,300 kg Payload: 1,035 kg Braked single-axle low-loader 1,300 kg KNOTT axle with inertia brake, automatic reverse function, and handbrake Bolted and galvanized steel frame Folding drawbar With hydraulic assistance 15 mm thick, robust, and anti-slip phenolic plywood flooring 13-pin electrical system Plastic mudguards Support wheel 13-inch M+S tires Multiple lashing points Front position lights Rear lights with reversing light, rear fog light, and triangular reflectors Folding license plate holder 2x wheel chocks Optional accessories: - 100 km/h upgrade - Rear support stands Rsdpfsww Eg Rox Amgeu - 40 cm steel side panels - Extension side panels - Mesh sides - Drive-on rear ramp - Motorcycle wheel rail - Crank handle for infinitely adjustable tipping angle - Flat tarp with or without hoops - High tarp - Coarse or fine mesh net - Spare wheel with holder Further accessories available on request! Photos are for reference only and may show optional accessories at additional cost. Plus vehicle registration document and shipping to Gera €150 net Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and immediately available for collection. Workshop open weekdays from 8:00 am - 5:00 pm for all types of repairs. Specialist for axle repairs, including caravan axles. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get professional advice by phone, visit our website, or drop by directly.

Condition: new, * IMMEDIATELY AVAILABLE * Including tiltable – closed loading platform / drive-on without ramps / very lightweight Technical Data: Rjdpfsx Tcfpsx Amgsu • Brand: Martz • Model: UNILADER 330 C • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 330 x 184 x 0 cm • External dimensions (LxWxH): 490 x 245 x 87 cm • Perm. total weight: 1,500 kg • Unladen weight: 340 kg • Payload: 1,160 kg • Chassis: Low-loader (wheels beside the superstructure) • Tyres: 185R14C • Suspension: KNOTT rubber suspension axle • Jockey wheel: Yes • 100km/h approval: Optional, retrofittable DESCRIPTION • Anti-slip, waterproof phenolic plywood floor • Mounting options in all 4 corners for mesh extensions, side panels, or raised front wall • Robust eccentric latches for locking the loading platform • Very low chassis for a shallow loading angle • Tiltable loading platform with gas struts • Optionally retrofittable with higher side walls and rear loading flap • Very robust steel frame • 8x tie-down rings recessed in the side frame profile • Reversing automatic • KNOTT overrun hitch and parking brake • Very robust V-drawbar, bolted • 13-pin plug • Reversing light • Large, safety-rated lighting • Integrated rear fog light • Lighting recessed into rear frame • Jockey wheel Optional accessories – feel free to inquire: • 100km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing light • Lashing straps • And much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle documents can be sent in advance or temporary export plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available in stock! We have been authorized dealers and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands - Subject to errors, prior sale, and changes -

Condition: new, functionality: fully functional, empty load weight: 289 kg, maximum load weight: 1,011 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, Year of construction: 2026, MARTZ High Loader 250 1.3T NEW VEHICLE Internal dimensions: 254 cm x 151 cm Gross weight: 1300 kg Payload: 1011 kg Rodpfsww A Hbjx Amgsu Braked single-axle high loader 1300 kg KNOTT axle with overrun brake, automatic reverse, and handbrake Bolted and galvanized steel frame Galvanized steel side walls, 40 cm high 15 mm thick, robust, and anti-slip phenolic plywood floor 13-pin electrical system Jockey wheel 13-inch M+S (Mud & Snow) tires Multiple tie-down points Front position marker lights Rear lights with reversing light, fog light (NSL), and triangular reflectors 2x wheel chocks Optional accessories: - Upgrade for 100 km/h approval - Rear support legs - Upgrade steel side walls to aluminum - Extension side walls in steel or aluminum - Integrated loading ramps in steel or aluminum - Mesh sides - H-frame - Motorcycle wheel chock - Flat tarpaulin with or without support bows - High tarpaulin - Coarse or fine mesh net - Spare wheel with bracket Further accessories available on request! Images are for reference only and may show equipment subject to additional charges. Plus vehicle registration certificate and freight to Gera: €150 net Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. Our workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers available. We also offer a wide range of spare parts and accessories for trailers of all brands. Get professional advice by phone, visit our website, or stop by in person.

Condition: new, *IMMEDIATELY AVAILABLE* Including continuous ramp 150 cm / Low loading height / Floor-mounted lashing eyes Technical Data: • Brand: Martz • Model: BAU-3 300/2 S • Vehicle type: Construction machine trailer • Vehicle condition: New vehicle • First registration: None • MOT/Technical Inspection: 2 years from first registration • Internal dimensions (LxWxH): 298 x 153 x 25 cm • External dimensions (LxWxH): 499 x 211 x 162 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 545 kg • Payload: 2,155 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walkable steel mudguards • Grating step boards at rear on both sides • Phenolic plywood floor, continuous jointless, anti-slip, and waterproof • Very stable welded steel frame • Frame fully hot-dip galvanized • Steel ramp, upright on shaft, 164 cm • Heavy-duty eccentric locks • Corner posts with tool-free removable locks for rear panel • Insertion points in all 4 corners for tarpaulin fittings, mesh sides, sidewall extensions, or front wall extension • Robust support feet at the ramp • Ramp lifting aid • Very low chassis for shallow approach angle • With bucket support • 10x recessed lashing rings in the side frame profile (1000daN/kg) TÜV certified • Three-sided perforated rail (Combi Protect Rail), can also be used with load bars and lashing straps – round holes 25 mm, elongated holes 54x25 mm • Maintenance-free rubber torsion axles by BPW/AL-KO • Automatic reverse function • BPW/AL-KO overrun brake and parking brake • Very stable bolted V-drawbar REINFORCED • 13-pin connector • Reversing lights • Large safety lighting system • Directional tail lamps • Integrated rear fog light • Lighting recessed in rear frame • Centrally positioned automatic jockey wheel Optional retrofittable accessories – please inquire: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • ...and much more New vehicle with warranty and MOT. - Financing or leasing available Rsdpfx Amex Tbkwsgju - Nationwide delivery possible - All prices include VAT - Vehicle registration certificate can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For more than 30 years, we have been specialist dealers and repair workshop for Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more brands. - Errors, omissions, and prior sale excepted -

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, loading space length: 2,530 mm, loading space width: 1,640 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250/2 C S 2T NEW VEHICLE Internal dimensions: 253cm x 152cm Sidewall height: 30cm Platform height: 80cm Gross weight: 2000kg Payload: 1532kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x axles with 1350kg brakes Low chassis Fully welded hot-dip galvanized steel frame Aluminium profile side panels with tension latches Fold-down and removable on all sides Galvanized steel floor Support wheel 6 lashing eyes Reinforced 13" C-rated tyres with steel valve M+S tyres Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lamps with reversing, fog lights and triangular reflectors Top frame mounted on rubber bushings Hand pump with stowable handle Safety lock for top frame OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder Rsdsw A I Etopfx Amgsu - Loading ramps - Folding crank rear supports - Full LED lighting - Anti-theft device - Mesh netting (fine or coarse) - H-frame - Leaf mesh sides in various heights, also closed - Extension side panels in steel or aluminium 30cm with tension latch - Flat cover, with or without hoops - High cover, 140cm Additional accessories available on request! Plus shipping to Gera and vehicle registration certificate: €200 net Pictures are for illustrative purposes and may show accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles in stock and available for immediate pickup at all times. Our workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from different manufacturers. Visit us online or come by in person!

Condition: new, functionality: fully functional, empty load weight: 364 kg, maximum load weight: 1,636 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ High Loader 250/2 C 2T NEW VEHICLE Internal dimensions: 254cm x 151cm Sidewall height: 40cm Loading height: 71cm Gross weight: 2000 kg Payload: 1636 kg Braked tandem high loader Overrun brake and handbrake by KNOTT 2x 1000 kg axles with automatic reverse brakes Bolted and hot-dip galvanized steel frame Galvanized steel side panels with safety latches Drop-down and removable sides on all sides 15mm thick, anti-slip, robust phenolic plywood floor Jockey wheel 6x lashing rings 13" wheels M+S tires Net/rope hooks on the frame 13-pin plug Front marker lights Rear lamps with reversing light NSL and triangular reflectors 2x wheel chocks OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Integrated loading ramps, aluminium or steel - Foldable crank rear supports - Anti-theft device - Net, fine or coarse mesh Redpfx Amsww A Dtjgeu - H-frame - Replacement of steel side panels with aluminium side panels - Mesh sides in various heights, also fully closed - Additional side panels, aluminium or steel - Flat tarp with or without bows - High tarp 140cm - Automatic jockey wheel Additional accessories available on request! Plus freight to Gera and registration documents €150 net Images are for reference only and may show optional accessories at extra cost. Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pick-up. The workshop is open for all kinds of repairs on weekdays from 8:00 am to 5:00 pm. Specialist for axle repairs, including caravan axles. Large range of rental trailers. We also offer a wide selection of spare parts and accessories for trailers from all manufacturers.

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Rsdpsu R D Sdsfx Amgsu

Condition: used, Year of construction: 2008, Table size 2000 x 760 mm X/Y/Z - 1740/760/660 mm Spindle speeds 12.000 rpm No. of stations in tool changer 30 pcs. Spindle taper ISO 40 Rsdpjzabilsfx Amgsu Max. table load 1400 kgs. Control: Mazatrol 640 M Equipped with: Rotary table as 4th. axis 10 tool holders Tool measuring system Chip conveyor

Condition: excellent (used), Memmert Forced Convection Drying Oven / Heating Cabinet Manufacturer: Memmert GmbH + Co. KG Type: UFP 800 For sale is a used Memmert UFP 800 from commercial use. Technical data Type: UFP 800 Protection class: IP20 Standard: DIN 12880-KI 3.1 Temperature range: up to approx. 250 °C Connection: 3N~ 400 V / 50-60 Hz Power consumption: approx. 4800 W Rsdpfey T Idwox Amgeu Current consumption: approx. 7 A External dimensions: approx. 1190 x 750 x 1620 mm Internal dimensions: approx. 1040 x 600 x 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Equipment Stainless steel interior Forced convection operation Digital control Programmable operation possible Glass viewing doors Multiple insertion levels Movable on castors Condition Used equipment from commercial use. Optical condition see pictures. Normal signs of use and storage are present. Scope of supply Memmert UFP 800 heating cabinet Inserts / accessories as shown in the pictures Scope of supply exclusively as shown in the pictures. Notes Sale exclusively to commercial customers. Used item without guarantee or warranty. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone or message.

Condition: excellent (used), Type: UF 450plus Airflow: forced recirculation Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Rjdpey T Ictofx Amgju Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculation: adjustable in 10% increments Fresh air: electronically adjustable Exhaust: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear has 2 openings each with an approx. 12 cm diameter. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Recirculating Chamber Furnace, electric, 12-month warranty, Program controller upgrade to the new Jumo Dicon, fan bearings newly replaced, new photos coming soon -Capacity: 8,000 liters -Tmax: 300°C -Internal dimensions (W x D x H): 2000 x 2000 x 2000 mm -External dimensions (W x D x H): 2559 x 2578 x 2665 mm -Fresh air supply and exhaust with adjustable damper -Optional exhaust fan and frequency inverter available on request -Safety thermostat -Program controller upgrade to the new Jumo Dicon Touch: 10 programs, each 50 segments, with network interface -Recirculating fan bearings newly replaced -Double doors -Heating capacity: 36 kW -Total power: 39.8 kW -Power supply: 400V, 3-phase, 50 Hz -Weight: 1,300 kg -Documentation, CE declaration -Electrically tested and supplied with current DGUV measurement protocol Inspection at our facility by appointment at any time. Rjdoy Am R Ujpfx Amgeu Oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, temperature chamber, recirculating oven, chamber furnace, preheating furnace, chamber recirculating furnace, tempering oven, chamber dryer, drying cabinet

Condition: good (used), Binder FED 400 Heat Cabinet Heat Cabinet / Drying Oven / Laboratory Furnace Industrial model with forced convection Manufacturer: Binder GmbH Model: FED 400 Design: Heat cabinet with forced convection For sale is a pre-owned Binder FED 400 heat cabinet from an industrial facility closure. This heat cabinet is suitable for laboratory, research, development, quality assurance, materials testing, as well as industrial applications. The unit features electronic temperature control, forced convection, and a stainless steel chamber in a robust industrial build. Technical Data (according to nameplate / manufacturer specifications): Manufacturer: Binder GmbH Model: FED 400 Version: E2 Serial-No.: 15-21306 Made in Germany Electrical Data: Operating voltage: 400 V Frequency: 50 / 60 Hz Power supply: 3 N~ Nominal power: 3.40 kW Current: 7.4 A Protection class: IP20 Temperature Data: Temperature range: up to 300 °C Forced convection Safety device according to DIN 12880 Class 2.0 External dimensions approx.: Width: 1235 mm Height: 1025 mm Depth: 765 mm Chamber dimensions approx.: Width: 1000 mm Height: 800 mm Depth: 500 mm Chamber volume: approx. 400 liters Weight (manufacturer information): approx. 145 kg Equipment: Binder FED 400 heat cabinet Forced convection Digital temperature control Electronic controller Stainless steel chamber Double-leaf doors Removable shelves Rear exhaust port Industrial and laboratory design Condition: Redpfjy R Axqjx Amgju Used equipment with typical signs of age and use. Visual condition as shown in photos. The device is from ongoing operation. Scope of delivery: Binder FED 400 heat cabinet Removable shelves Scope of delivery as pictured Notes: Inspection possible by prior appointment. Actual technical data, dimensions, weights, and features may vary. Information without guarantee. Subject to prior sale. Commercial sale – sold without warranty.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Stationary industrial vacuum cleaner Power: 2.2 kW Rodpfx Amjxqghtegou Airflow: 300 m³/min Suction connection: 40/50 mm Weight: 30 kg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Redovcb U Aspfx Amgju Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), pressing force: 300 t, stroke length: 200 mm, table width: 700 mm, table length: 1,200 mm, throat depth: 370 mm, stroke adjustment: 150 mm, Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, utilizing force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key advantages Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with centralized automatic lubrication Production-ready operation with PLC control + two-hand/foot pedal control Areas of application Cold cutting and punching operations Cold forming applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-way guided slide system • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Ray barrier finger–hand protection safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies manufactured to required specifications • Eight-way guided slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Distance table–ram: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (stroke setting): 150 mm Approximate press width: 2000 mm Rjdpfx Amsx N Nfhegeu Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table bore diameter: Ø260 mm Table size: 700×1200 mm Die mounting hole diameter: Ø60 mm Ram size: 780×400 mm Table height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 SPM Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: good (used), Year of construction: 2014, lifting height: 5,400 mm, fork length: 1,800 mm, Empty weight: 3.000 kg Technical condition: good Visual appearance: good Transport dimensions (LxWxH): 3,38x1,83 Please contact Christian Theißen for more information Manufacturer: Ausa Type: C300 Hx4 Year of manufacture: 2014 Product type: Used Data: Max. lifting height: 5.40 m Lifting capacity: 3,000 kg Fork length: 1.80 m Drive type: Diesel Net weight: 5,625 kg Overall dimensions (without forks): LxW 3.38 x 1.83 m Construction height: 2.68 m Special features: Switchable all-wheel drive, street lighting, trailer operation possible. Location: 41468 Neuss Immediately available Redpfx Ajw Uf Rcomgsu

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Rsdpfx Amoyzzm Iogju Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, 12-month warranty, in-stock item, brand-new unit - Model on casters - Maximum temperature: 300°C - Oven chamber volume: 1,050 liters - External dimensions: 1,470 x 970 x 1,920 mm (W x D x H) - Oven chamber dimensions: 1,200 x 670 x 1,400 mm (W x D x H) - Controller B510 (5 programs with 4 steps each); also available with C550 (10 programs with 20 segments each) - Horizontal, forced-air circulation results in temperature uniformity according to DIN 17052-1 of better than ±5°C in the empty usable chamber (with exhaust vent closed) - Permissible batch weight: 250 kg with evenly distributed load - Load per shelf: 30 kg with evenly distributed load - Reinforced floors and rails for 80 kg distributed load available upon request Rjdpfx Asiqkr Iemgsu - Shelves included: 4 pcs - Maximum number of shelves: 14 pcs, available at short notice - Connected load: max. 9.3 kW - Fan capacity: approx. 500 m³/h - Connection: 380-415V 3/N/PE 50 Hz - Net weight: 450 kg - Documentation, CE declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg The oven is not suitable for solvent-containing substances and may not be used for heating foodstuffs, animals, wood, grain, etc. Keywords: oven, ovens, industrial oven, heating cabinet, heat oven, laboratory oven, drying oven, tempering oven, test chamber

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances Redpfx Ajiq Uv Nsmgeu - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) - incl. 1 piece mesh shelf - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each; additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 recirculating air fans - Double doors with safety door sensors - Over-temperature protection: Eurotherm 3216i - Control/recorder unit with color touch display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating power: approx. 70 kW - Entry rails, recess for cart loading - Documentation, CE declaration of conformity - Electrical schematic with spare parts list We are happy to offer transport, installation, and staff training upon request. Also available as a new unit with exhaust fan and other equipment! Delivery time approx. 10–12 weeks. Please contact us! Rsdpfx Ajlkb Ezjmgeu We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating up oven, chamber recirculation air oven, annealing oven, tempering oven.

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm Rjdpfx Amewyblzsgsu 10000 rpm Parts shown by hand not come.

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Redpfx Aoynh E Asmgou Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 Rodpeyma Nwjfx Amgsu at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Rodpfoir U H Eex Amgsu Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor Rodpfx Aeirukuemgsu -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg