Used Mechanical Components for sale (15,554)

Condition: used, TECHNICAL DETAILS - max. diameter of tapping and threading : M6 - max. length of stroke : 20 [mm] - number of spindle revolutions with interchangeable gearboxes : 4200, 2700, 1600, 1050, 620 [rpm] - power : 0.5 [CV] Ijdpevu E S Aofx Ag Astn - number of revolutions : 1400 [rpm] - brake motor protected against overheating by 3 pilotherms

Condition: used, TECHNICAL DETAILS - max. diameter of tapping and threading : M6 - max. length of stroke : 20 [mm] - number of spindle revolutions with interchangeable gearboxes : 4200, 2700, 1600, 1050, 620 [rpm] Ijdpfx Aevu E Svjg Aotn - power : 0.5 [CV] - number of revolutions : 1400 [rpm] - brake motor protected against overheating by 3 pilotherms

Condition: used, Precision engineering oil 701, 400 ml spray can, OKS · For lubricating and maintaining precision mechanical machine components · Resin-free and acid-free · Excellent creep properties · Very good wetting properties · Compatible with plastics · For use in measuring instruments in precision engineering or optics Ijdpfx Ajz T Nbgeg Aetn · Other technical properties: Temperature: -50 °C to +100 °C

Condition: used, Kübrich   Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench   Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box   Intended use: The test bench is used for carrying out tests on belt starter generators during development.   Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage 24 V   Mechanical performance data according to the data sheet of the load machine A gear ratio of 1:2 to the test specimen shaft must be considered. Speeds: Load machine: Manual operation: 0 - 50 rpm Automatic operation: min Test specimen motor: Manual operation: 0 - 0 rpm Automatic operation: 0 - rpm   Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm   Weight: approx. 1.2 t   Condition: used   Scope of delivery: (See Figure) Itjdpjzhkb Sefx Ag Ajn   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Itjdpfezuukqox Ag Ajn Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: like new (used), Year of construction: 2024, Twin lane linear weigher. All stainless steel. Ijdpex Hgb Isfx Ag Aotn

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Year of manufacture: 06/2023 Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Iedpjzxg T Eofx Ag Aotn Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: used, Precision screwdriver set 269 T11 01, 11-piece, Slotted/PH/TX/6-point, WIHA · With combination interchangeable blades and telescopic handle · Blade length variably adjustable from 18 - 90 mm · Blades made of chrome-vanadium-molybdenum steel, Ø 4 mm · Matt chrome-plated · ChromeTop® blade tips Contents: 1 SoftFinish® multi-component telescopic handle (110 mm) 1 blade each for slotted screws, sizes 1.5 - 3.0 / 2.0 - 3.5 / 2.5 - 4.0 mm 1 blade each for screws with cross-recessed (PH) heads, size 1 blade each for screws with internal TORX® profile, sizes T 6 - 8 / 7 - 9 1 blade each for screws with internal hexagonal profile, sizes 1.5 / 2.0 / 2.5 mm (1 side hexagonal / 1 side hexagonal with ball head) · Other technical features: Contents: 11-piece Itedpfjz Ub Ubox Ag Ajn · Material: Chrome-vanadium-molybdenum steel

Condition: good (used), Dean Smith & Grace Type 25 x 120 Lathe Excellent condition. 120" between centres 25" swing DRO 3 Steadies included 4 Jaw Chuck Ijdoz S Adlepfx Ag Ajtn

Condition: ready for operation (used), Heidenhain UVR 120D ID 390 188-01 SN: 14057083B - including test report, professionally and completely overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Note: In the exchange process, your defective exchange part must not have any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €1,000 including VAT will be applied. Itsdpfsz Syzzex Ag Aon Attention: You are bidding on a Heidenhain UVR 120D inverter, ID 390 188-01, SN: 14057083B, offered as an exchange service. It has been professionally and completely overhauled and tested, and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €1,000 including VAT will be issued.

Condition: ready for operation (used), Heidenhain ID 390 940-03 G8 card, 383669-04, serial number 21332731, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfx Agjz Tbd Tj Aetn

Condition: ready for operation (used), Heidenhain .344 712-01 A5 card, 323257-06, serial number 10454064A. Circuit board, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Iodpfx Aez Tbfksg Ajtn

Condition: ready for operation (used), Heidenhain UVR 120D inverter, ID: 390 188-01, serial number: 14057083B – complete with test report, professionally refurbished and tested, with a 3-month warranty. In good condition, 100% functional. Scope of delivery as shown in the photos. Ijdpfsz Syzujx Ag Aotn

Condition: ready for operation (used), Heidenhain 325 821-03 W5 graphics card, 317110-05, serial number 8302392, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Itjdpfoz Tbdtex Ag Aen

Condition: ready for operation (used), Heidenhain 325 821-05 C2 graphics card, 317110-07, serial number 12937685, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfx Agez Tbd Hs Astn

Condition: ready for operation (used), Heidenhain 325 821-03 W6 graphics card, part number 317110-05, serial number 8362409, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Iedpsz Tbdysfx Ag Aetn

Condition: ready for operation (used), Heidenhain .344 712-C3 card, 323257-07, serial number 12468795. Circuit board, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Ijdpfx Agoz Tbfqe Ajtn

Condition: used, Nut splitter M18-M24, mechanical, quality 6, KUKKO · Mechanical · For loosening seized or overtightened nuts without damaging the threaded bolt. The dimensions given for the nuts refer to the wrench size! Itsdpfx Ago Aak Nkj Asn · Other technical specifications: Weight: 0.66 kg

Condition: used, Office swivel chair with point-synchron mechanism, blue, 430-510 mm, without armrests, load capacity 110 kg, TOPSTAR · Features a point-synchron mechanism (without armrests) Itodpfoz Ux Skox Ag Aon · Designed for predominantly sedentary activities · Polished aluminum base · Ergonomic backrest with side padding for support

Condition: used, Vogesenblitz 17-ton wood splitter on an 80 km/h chassis, compliant with the new safety standard EN 609-1 - Powered by a 9 HP TEXAS diesel engine with electric start and double pump - 17-ton splitting force - Combined with a transport trailer for 80 km/h road use - Ball hitch coupling - For transport, the splitter can be quickly and hydraulically brought into a horizontal position - Chassis can be approved for 80 km/h road transport - Incl. lighting system - Incl. EC declaration of conformity (registration documents) - Simple and easy-to-use two-hand operation - Robust, 9-position adjustable log clamp with gas spring on the left operating lever - 2 splitting speeds Itsdoz U D Haopfx Ag Asn - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Mechanical log lifter with automatic locking as standard - Full steel base plate with beveled edges, completely covered with diamond plate - Piston quick return - Ergonomically shaped splitting wedge, length 26.5 cm - Replaceable splitting blade - Brass guide with grease fitting - Holder for hatchet and axe - High-quality powder coating

Condition: used, Precision screwdriver set, 250, 6-piece, slotted, TURNUS · With knurled steel handle · Nickel-plated · Replaceable blades · Induction hardened · Handle end with rotatable hexagonal head for precise work Contents: 1 screwdriver each for slotted screws Blade width - Ø 1 / 1.5 / 2 / 2.5 / 3 / 3.5 mm · Other technical features: Packaging: in a wooden box Itodpfx Aoz Uv Naeg Asn

Condition: used, Office swivel chair with automatic synchron mechanism, black, adjustable height 420-550mm, with armrests, load capacity 110kg, TOPSTAR · Equipped with automatic synchron mechanism (with armrests) · Features automatic adjustment of spring force based on body weight, and can be locked in the forward position · Synchronized seat and backrest movement Itodpfx Ajz Tw Eajg Asn

Condition: ready for operation (used), Maho tool holder for Maho MH 800 C machine with Parker CJJ-HMRES23MC cylinder, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Iodpfoz Tbf Rox Ag Aetn

Condition: used, Nut splitter M22-M33, mechanically operated, quality 6, KUKKO · Mechanical · For loosening seized or overtightened nuts without damaging the threaded bolt. The dimensions specified for the nuts refer to the wrench size! · Other technical specifications: Weight: 2.55 kg Iodpfx Agoz Ulauo Aotn

Condition: used, Description The VMR17-S-H Vogesenblitz wood splitter offers an impressive splitting force of 17 tons and is powered by a powerful 13 HP Honda gasoline engine. It features a dual pump and is combined with a transport trailer suitable for speeds of up to 25 km/h on the road. Additional equipment highlights include: - Ball-head coupling and detachable drawbar for easy handling. - A simple and easy-to-use two-hand control with two splitting speeds. - A maximum splitting length of 115 cm and a cylinder stroke of 105 cm, which can be lowered without tools. - A mechanical log lifter with automatic locking as standard equipment (patent pending). - A robust, full-steel base plate with beveled edges for stability. - Piston quick return for efficient operation. - Ergonomically shaped splitting wedge and a 9-way adjustable log clamp with gas spring. - Brass guide with lubrication for long service life. - Mounting bracket for axe and hand saw for additional accessories. Itsdpfx Asz Twfmeg Asn Please note that a lighting system is available separately, and TÜV approval is not possible!