Used Membrane Vakuumpress Optimat Factor for sale (1,023)

Year of construction: 2026, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Nsdegp I Upjpfx Ab Rolh Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Nlsdez Nfb Ijpfx Ab Rsh Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 3 nr

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes No of positions for the rolls: 2 No of work tables: 1 Nodezq Urtopfx Ab Rolh

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-250-04-1744, functionality: fully functional, input voltage: 400 V, number of axes: 4, number of slots in tool magazine: 8, total length: 7,500 mm, total width: 4,600 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, For sale: Weeke Optimat BP 150, the largest model, a 4-axis, liquid-cooled machining center with 12 beams and two vacuum pumps, one of which has undergone a major overhaul. The machine is in continuous operation. The gross price includes 23% VAT. This is a reliable and durable machine; parts are readily available through the Hommag network and on the open market at very reasonable prices. I recently replaced the vertical drive shaft and other minor parts. It is a solid, heavy-duty, and rigid machine. The headstock covers are removed but are included as a complete set. The machine is still in continuous operation, working at 25% capacity. It has 12 vertical drilling units in the X-axis, 24 vertical drilling units in the Y-axis, and 12 horizontal drilling units. It also includes a grooving saw and a milling cutter. Two safety mats require repair or replacement. The price is 5,000 Euros, and loading onto a truck costs 890 Euros. Nsdpsz Tfiasfx Ab Rjlh I am selling it because I am closing my business due to my age.

Condition: new, Year of construction: 2026, Engine power: 10 HP Splitting force: 20 tons KH1100F diesel engine Starting: pull starter and key Max. operating pressure: 22 MPa 4" cylinder Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 5 s Return time: 3 s 4-arm splitting wedge OREGON 20" guide bar Chain: 74 links, 0.375 Saw/splitter drive: hydraulic motor/gear pump Nodpfx Abszx Apis Relh Ejector length: 3175 mm Conveyor belt (outfeed belt): 6800 x 250 x 4 mm Engine oil: 1.5 L (10W30/10W40) Hydraulic oil: 32 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (L x W x H) 2200 x 1000 x 1200 mm Machine dimensions (L x W x H) 6400 x 1400 x 2200 mm Weight 1151 kg Features Crawler drive – self-propelled design allows for operation in difficult terrain. Combustion engine – complete independence from electrical power. Splitting force of 20 tons – effective splitting of even hard wood. Hydraulic feed and pressure – faster and more convenient operation. Hydraulic cutting and splitting – high efficiency of the entire process. Maximum wood diameter of 500 mm – allows for processing large logs. Sturdy construction – suitable for intensive use. Mobility – easy access to the job site without the need to transport wood.

Condition: used, Year of construction: 2016, WEEKE OPTIMAT BHX 055, manufactured in 2016 according to the nameplate. Compact vertical CNC machining center for drilling and milling of wood-based materials. Equipment: - CNC-controlled vertical machining - Drilling unit and milling spindle - Tool changer - woodWOP 7.0 - Operation via screen control Main usage according to meter reading photo from July 27, 2026: approximately 4,563 hours. This figure refers to the main usage, not the total operating time. Location: Germany. Further technical data and scope of supply available upon request. Photos show the machine offered. Njde Advkhspfx Ab Relh Price on request.

Condition: used, Year of construction: 2006, machine/vehicle number: 0-341-07-7151, functionality: fully functional, operating hours: 20,000 h, power: 7,500 kW (10,197.15 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 60 mm, cutting width (max.): 3,200 mm, height adjustment type: electric, total length: 7,230 mm, total width: 6,370 mm, total height: 2,000 mm, overall weight: 5,580 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, HOLZMA OPTIMAT HPP 250/32/32 CNC Beam Saw – 2006 Njde Afpg Espfx Ab Rolh For sale: HOLZMA OPTIMAT HPP 250/32/32 horizontal CNC panel saw, manufactured in 2006. Used in single-shift furniture production and regularly maintained. Specifications and equipment:

Condition: used, Year of construction: 2013, WEEKE OPTIMAT ABD 150, manufactured in 2013. CNC-controlled drilling, gluing, and dowel insertion machine for furniture components. Equipment: - 3 individually controlled vertical drilling spindles, spacing 32 mm - 3 individually controlled horizontal drilling spindles, spacing 32 mm - Gluing unit with adjustable glue quantity - Dowel insertion unit for standard dowels 8 x 30 mm / 8 x 35 mm - Automatic dowel feed via vibration feeder - 4 upper clamping cylinders - Left, right, and center workpiece stops - Automatic central oil lubrication - powerControl with woodWOP and ABDWork Workpiece range: Length 20–1,250 mm, width 100–800 mm, thickness 10–60 mm. The machine is located in the TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). The original photos show the machine in its previous location. Inspection, functional testing, and detailed information on the scope of delivery are available by appointment. Price on request. Offer includes free loading onto a truck. Transport is subject to separate agreement. Nsdpfx Abo Afawbj Relh High-quality machines sourced from Germany, Austria, or Switzerland. Consulting and sales handled by DS-Maschinen in Stuttgart. PC and software as shown in the original photos: woodWOP 6.1; Microsoft Windows XP Embedded, Version 2002, Service Pack 3; Beckhoff C9900-I374 v1.1. Counter photo: Total operating time 24,701.5 h, production time approx. 1,806 h. The values refer to different types of counters and the status of the available recording.

Condition: new, Year of construction: 2026, Engine power: 14 HP Splitting force: 20 tons Nlsdpfx Abozx Amzo Rsh LONCIN engine Starting: Puller and key Operating pressure: 18 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 500 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s 6-arm splitting wedge 22" STHIL guide bar 74-link chain, 0.75 mm Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3.2 m Conveyor belt (outfeed belt): 6800 x 250 x 4 mm 13" tires Engine oil: 0.8 L (10W30/10W40) Hydraulic oil 30 - 35 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (W x L x H) 2150 x 1000 x 1200 mm Machine dimensions 6400 x 1200 x 2200 mm Gross weight 650 kg Features: Splitting force of 20 tons – effective splitting of larger and harder logs. Combustion engine – independence from the electrical grid, suitable for field use. Hydraulic feed and pressure – stable material guidance and safe operation. Hydraulic cutting and splitting – one machine for two key stages of wood processing. Sturdy construction – durable and stable frame for intensive use. Ergonomy and comfort of use – convenient settings and intuitive operation facilitate everyday use. Universal use – suitable for farms, forestry work and professional woodworking.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Condition: ready for operation Machine type: machining center Nledpfx Aox Nw Dreb Rsh If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 0-261-03-6806, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: pneumatic, total height: 1,610 mm, total length: 4,000 mm, total width: 1,680 mm, overall weight: 1,000 kg, Equipment: documentation/manual, The Brandt edge banding machine has provided excellent service for 30 years in a small business and is now to be passed on to new owners. Nodpez Db N Nsfx Ab Rolh

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. Nedpfx Ajztxx Njb Rslh A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Nodpswun Irjfx Ab Rjlh Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: new, Year of construction: 2026, Workpiece height 8-45 mm (optional: veneering up to 60 mm) Minimum workpiece length 100 mm Minimum workpiece width 100 mm Edge thickness 0.4-3.0 mm Feed speed 9.5 m/min Cutting unit - engine power 1 x 0.27 kW Milling unit 2 x 0.35 kW Milling unit 12,000 rpm Corner finishing unit - minimum workpiece length 250 mm Corner finishing unit - minimum workpiece length 1 x 0.35 kW Nledpsv Duvvofx Ab Reh Corner finishing unit 12,000 rpm Pre-milling unit 1x 1.1;1 x 0.75 kW Pre-milling unit 12,000 rpm Edge cutting unit: Glue removal unit: Polishing unit - engine power 2x0.18 kW Polishing unit 2800 rpm Retractable support with rollers: Diameters of exhaust ports fi 120 mm Compressed air pressure 6.5 bar Total power 6.7 kW Dimensions - L x W x H 4200x800x1500 mm Weight 1180 kg + 2000 euros for option with a PUR glue

Condition: new, Year of construction: 2026, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW compressed air connection 6.5 bar total power consumption 9 kW / 400 V dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit Nedpfjv Dutbsx Ab Rjlh • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank.

Year of construction: 2026, condition: new, SALE! until end of 2026 - EXHIBITION MACHINE DUOFORMER S VERTICAL Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! THE ORIGINAL MADE IN AUSTRIA! DUOFORMER - Heating – Forming- Pressing! The HEATING UNIT for all thermoplastic materials up to 230°C and The VACUUM PRESS for daily use! • No tricky placing of pressing layers • No sliding of the former • effortless closing and opening • pressing of M-shapes • operating from all 4 sides DUOFORMER S VERTICAL- Producing without compromises! Now on sale! Vertical opening: work piece height up to 850 mm Clamshell opening: See other sales offer on this platform! Pressing surface LxW: 2880x1280mm Heating surface LxW: 2600x1250mm Overall dimensions LxWxH: 3400x1750x1500mm • Heating drawer +230°C – 16kW • 40 m³/h high performance vacuum pump (BECKER) • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal Equipment: Vacuum table with silicone membrane and MEMBRANE FAST-CHANGE SYSTEM •Fully welded, sturdy and robust steel construction •pressure up to 9 t/m² (-900 mbar rel.) •analogue vacuum pressure gauge •mechanical vacuum pressure regulator •transparent Silicone membrane up to 230°C, 780% elongation, 40 Shore-A •robust, heat resistant phenolic resin ply working surface with integrated air suction channels, thickness 16mm •extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) •with intecrated forklift pockets •incl. swivel castors Heating drawer with CAS-heating system (Controlled Air Stream) •material thickness: 0 - 70 mm Njdpeiquxgefx Ab Rolh •heating power: max temperature +230°C •2 circulation hot air fans •pull-out working surface with grating, grid 30 x 30 mm •easy removable heating drawer Control unit with 4“ SIEMENS touch panel •hinged control cabinet on the right side •variable temperature control up to + 230 °C •temperature control with timer and alarm •complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 17.5 kW Duoformer production capabilities: ● Pre-heating and forming of solid surface materials such as: CORIAN; HIMACS; KERROCK; HANEX; STARON; MISTRAL; AVONITE; TRISTONE; VELSTONE; WILSONART; GETACORE; RAUVISIO; VARICOR; PLEXICOR; MEGANITE; KRION; LIVINGSTONE; MARLAN; EOS; FORMICA; MYSTERA, etc. ● Pre-heating and forming of all other thermoformable materials such as: ABS, PMMA (Plexiglas, Perspex, Lucite), PET-G (Vivak), PE, PS, PP, PVC-U, PC (Makrolon), UPM-GRADA, RESYSTA, NFPP, etc. ● Vakuumpress for bonding, coating, edge banding, flat pressing, forming, gluing, laminated bending, pressing, spot on profile fitting, veneering Other dimensions on request! DUOFORMER Maxi Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3380x1380mm Heating surface LxW: 3000x1250mm Heating drawer +230°C – 24kW Vacuum pumps 40m³/h, 80m³/h, 100m³/h Overall dimensions LxWxH: 3900x1600x1500mm DUOFORMER Mega For a whole length of solid surface material boards! Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 4150x1780mm Heating surface LxW: 3850x1250mm Heating drawer +230°C – 32kW Vacuum pumps 80m³/h, 100m³/h, 140m³/h Overall dimensions LxWxH: 4700x2050x1500mm UNIVERSALFORMERS Direct – Honest - Experienced

Year of construction: 2015, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: M15090L, For sale is a high-quality Columbus Presstechnology vacuum membrane press. Type: Multimat Special Model: M15090L Year of manufacture: 2015 The machine is in good, well-maintained condition and is ready for immediate use. Technical data: Nljdey I Ugujpfx Ab Roh Voltage: 400 V / 50 Hz Power: 19 kW Suction capacity: 40 m³/h Vacuum: up to -0.9 bar Temperature range: up to 140 °C Equipment / condition: Functional and operational Robust industrial design Membrane included (used, but functional) Clear and easy-to-understand control panel Ideal for wood, furniture, or plastic processing Applications: Veneering Film coating Mold making / plastic processing Prototype production Inspection is possible – the machine is ready for operation. A Renner RS 75 compressor can be purchased for €1,000.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 3,050 mm, total width: 1,400 mm, Equipment: CE marking, 3050 mm x 1400 mm automatic membrane press with turnover and pin system. Has two tables. 320 Bar Working Pressure 60 N/cm^2 Spec. Press. Nsdpfjzp H Ikjx Ab Relh 3000 kN Max Pressure 400V 50hz Ready to use in Turkey; can ship abroad.

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Panel dividing saw Manufacturer: Homag Type: Sawteq B-200 Optimat HPL200/38/22 Year of manufacture: 2022 Nljdpe Abaqyofx Ab Rsh Technical data - Cutting length: 3800 mm - Width of feed table: 2200 mm - Number of clamping devices: 7 - Feed rate: max. 80 m/min - Stepless feed rate - Panel thickness: min. 9.5 mm - Saw blade overhang: 95 mm - Saw blade diameter: max. 380 mm - Main motor: 9.2 kW - Scoring saw - Labeling manually via HOMAG PICA - Control system: CADMATIC 5, Homag POWER CONTROL V2 - CE marking - Operating hours: 1700h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 160 mm, workpiece width (max.): 1,100 mm, Wide belt sanding machine Manufacturer: Bütfering Type: Optimat SWT 124 RK Year of manufacture: 2010 Nsdezznkkjpfx Ab Rslh Compact wide belt sanding machine, originating from a parquet manufacturing facility. Suitable for sanding solid wood, frames, and glued wood panels, as well as MDF, chipboard, or plywood. Allows for 2 grit levels in a single pass. Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x Calibrating unit / steel contact roller, profiled, diameter 160 mm, approx. 15 kW 1x Combination unit (roller / sanding shoe), profiled and rubberized contact roller approx. 65 Shore, diameter 160 mm, pneumatic pressure bar, approx. 11 kW Feed speed, continuously adjustable, approx. 3 - 13 m/min., approx. 1.1 kW Sanding belt dimensions: 1120 x 1900 mm with belt blowing device Compressed air: 8 bar Extraction capacity: approx. 2900 m3/h Voltage: 400 V, 3 phases, 50 Hz, 63 A Total connected load: 28 kW Dimensions approx. 1700 x 1850 x 1900 mm (L x W x H) Weight approx. 1800 kg

Condition: new, Year of construction: 2026, Edge thickness 0.4 - 3 mm Thickness of glued boards 10 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Nedsv Dt T Hspfx Ab Relh Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Corner milling unit 0.75 kW Transport belt unit 1.5 kW Overall dimensions 4500 x 700 x 1450 mm Transport dimensions 4280 x 650 x 1280 mm Weight 1230 kg Pre-milling milling: diamond milling cutter. Gluing Final cutting Milling: two motors Corner finishing Radial scraper Flat scraper (glue) Spray system Polishing Internal lighting Automatic lubrication Electrical equipment: Delta brand

Condition: new, Year of construction: 2025, Planer OPTIMAT SOLID W 520S with a spiral shaft Min. material thickness 10 mm max. material thickness 75 mm Planing width 520 mm Min. workpiece length 150 mm Min. workpiece width 10 mm Total length of the table 2750 mm Receiving table length 1200 mm Nledpelvuqfefx Ab Rjh Length of the feeding table 1500 mm Shaft length 520 mm Shaft diameter 121 mm Shaft rotation 5000 rpm Time to shaft stop less than 10 s Number of knives 126 Knife dimensions 15 x 15 x 2.5 30° Guide dimensions 1200 x 190 mm Guide inclination from 90° to -45° Motor power 5.5 kW Table height (from the ground) 845 mm Diameter of the extraction spigot 120 mm max. cutting depth 8 mm Sound power level 99.2dB(A) Weight 800 kg

Condition: used, Year of construction: 2015, The machine is suitable for precise and efficient drilling and dowel insertion in furniture production. Technical specifications: Year of manufacture: 2015 Machine dimensions: 2.6 × 1.6 m 3 × vertical drills 3 × horizontal drills X, Y, and Z axes – NC controlled and computer-adjustable Nljdpfoz Incdjx Ab Roh Barcode scanner Uses dowels with a diameter of 8 mm Machine is in good condition The machine is available for inspection by prior arrangement. For additional information, pricing, or to arrange an inspection, please contact me.

Year of construction: 1999, condition: used, Year of manufacture: 1999 Colour: Grey Membrane press Nledpfswnhicex Ab Rjh Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis Nedszr N H Uepfx Ab Rolh • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.