Used Menta Mesh Grid Supports for sale (15,270)

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Gsdpfx Aottu Sgscajuh Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: new, High-quality grid decking with high load capacities, a cost-effective alternative to grid grating – new product – Prices available upon request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (so, for a 2.70m beam, 3 deckings are required = 2,655mm) 1335mm Guodpfeiuvxbex Acajh Frame depths: 1.05m 1.10m 1.20m Other depths available upon request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1,000kg, i.e., also per pallet Grid spacing: 50 x 100 or 25x100mm When making an inquiry, please also specify the type of beam (crossbeam) you have! I.e., whether it is a box profile (or IPE beam) 50 or 40mm, or whether you have crossbeams with a step. Advantages: no sharp edges 200% safety factor – independent of the shelving beams Tested for permissible deflection and structural failure Wide selection of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. MantaMESH provides assurance with more than 70% open area and a safety factor of 200%, exceeding the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR sprinklers. Compatible with ANSI MH 26.2 - 2007 Made in Germany Pre-welded, hemmed support channels Pre-galvanized finish Maximum deflection independent of the rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of the beam: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration – we would be happy to create a configuration for your application! Depth 1102mm Width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the beams Front: folds out 30mm Rear: folds down 30mm on the outside Item weight 9.43kg

Condition: good (used), Ideal for pallet racking systems with a frame depth of 800 mm and 2700 mm crossbars. It is also suitable for other applications. Size: 1340*820 mm (55*105 mm) Load capacity: approximately 400 kg/m2 If you require racking or accessories in other configurations or designs, please contact us. Gsdpfx Acshbhaveasuh We offer a comprehensive range of new and used racking systems as well as accessories and will be happy to assist you with your planning. Further accessories available, such as: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep support beams. Shipping: Please request shipping costs, providing your postal code, location, and the desired quantity of items. Further service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices, as well as prior sale, are subject to change!

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Gjdpfx Acjz Ekh Dsasuh Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: excellent (used), You are buying mesh shelves for pallet racking with end station. Size: 1320*850 mm and 890*850 mm Height (L shape): 22 cm Material thickness: 4.24 mm Pitch: 92*48 mm Load capacity: approx. 600 kg/m2 If you require shelves or accessories in other configurations or designs, please contact us. Gusdpfx Aepu Ad Dscash We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Godpfsz En Afjx Acaeuh Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Guedpfxez Enz Ue Acaeh Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels with 3 Euro pallets side-by-side, with a bay width of 2,700 mm). The system consists of 1 base bay and 7 extension bays, resulting in a total length of approximately 22 meters. Thanks to the grid decking, the racking is extremely versatile – also suitable for individual items, picking goods, or damaged pallets. The push-through guards and back panel grates included in the scope of delivery ensure maximum safety. Perfect protection against accidental pushing through or dropping of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 incl. ground-level space Crossbeam type: INP 100 Load per beam: 3,000 kg Load per bay: 14,000 kg Scope of delivery: 09 x Support frame 6,200 x 1,200 mm, blue 48 x Pallet racking crossbeam 2,700 mm, red 24 x Push-through guard 2,700 mm 32 x Back panel grate 2,700 x 1,200 mm 48 x Grid decking 1,330 x 1,200 mm Your partner for safe storage logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a renovation, or a warehouse liquidation – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving systems for small parts and archives - Storage platforms for optimal use of space Racking inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (in accordance with DGUV rule 108-007): - Inspection for deformations and damage. - Inspection of safety pins and load signs. - Creation of a legally sound test report including a test label. Guodpfxszrlp Sj Acajh "We offer you a suitable financing option for your project from a single source." You can find more articles – new and used – in our shop! International shipping costs on request!

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, steel side panels, swing tailgate Features: - Electric pump - Double hydraulics - Swing tailgate Net price: €10,634.45 / Gross price: €12,655.00 Article number: TI2235402010.01 Technical data: • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 400 x 200 x 30 cm • External dimensions (L x W x H): 530 x 211 x 102 cm • Loading height of the floor: 71 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,130 kg • Payload: 2,370 kg • Chassis: Low loader (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side panels • Click & Clamp: The new "Click & Clamp" system. For maximum strength as well as quick addition and removal of various optional side panels and accessories • Automatically adjustable supports and clampable side panels ensure a comfortable ride without unwanted rattling. • Side panels with robustly integrated fasteners • All side panels can be folded down and removed • Steel corner posts can be removed • Option to insert supports at all 4 corners for tarpaulin frames, grid attachments, side panel attachments or front wall extensions • Welded mesh hook under the loading area • Robust, rattle-free tensioning fasteners on the side panels • Galvanized steel sheet on a multiplex floor panel • Reinforced, stably screwed V-drawbar Gsdpfjx Tcfiox Acaouh • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in a high point load capacity • Additional longitudinal struts continuously welded • 8 lashing points recessed in the floor (1000 DaN/kg), TÜV certified! Closed at the bottom with spring plates • Swing tailgate on galvanized steel • U-profile on the rear, for easier placement of the ramp • Integrated ramp recesses for easy retrofitting of ramps • Chassis color: black • Side panel color: black • Double solid 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Removable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: The battery is charged via the vehicle's ignition when the engine is running (depending on the towing vehicle) • Battery charge level indicator • Battery disconnect switch • Support strut under the loading area for maintenance work • Rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Toolbox mounted on the drawbar • Spare wheel in the rear of the trailer • 13-pin plug • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Dynamic LED turn signals are clearly visible even in bad weather • Integrated rear fog light • Various marker lights front, side and rear • Lighting recessed in the rear frame • Heavy-duty support wheel • 5-year chassis warranty

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, steel side rails, rear doors Equipment: - Electric pump - Rear doors - Double hydraulic system Net price: €10,668.07 / Gross price: €12,695.00 Item number: TI2335362020.01 Technical data: • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 360 x 200 x 30 cm • External dimensions (LxWxH): 490 x 211 x 102 cm • Loading height of the floor: 71 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,172 kg • Payload: 2,328 kg • Chassis: High loader (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side rails • Click & Clamp: The new "Click & Clamp" system. For maximum strength and quick addition and removal of various optional side rails and accessories. • Automatically adjustable stakes and lockable side rails ensure a comfortable ride without unwanted rattling. • Side rails with robustly installed latches • All side rails can be folded down and removed • Steel corner posts removable Godpfx Acez Ri D Neaouh • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side rail extensions or front wall extensions • Welded mesh hook under the loading area • Robust, rattle-free tensioning latches on the side rails • Galvanized steel sheet on a multi-layer floor panel • Reinforced, securely screwed V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • 8 lashing points recessed inside the floor (1000 DaN/kg), TÜV certified! Closed from below with spring plates • Rear doors at the rear, can be opened sideways, with hinge • U-profile at the rear for easier attachment of the ramps • Integrated ramp recesses for easy retrofitting of loading ramps • Chassis color: black • Side panel color: black • Double, solid 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: The battery is charged when the engine is running via the vehicle's ignition (depending on the towing vehicle) • Battery charge level indicator • Battery disconnect switch • Support strut under the loading area for maintenance work • Rubber spring axles from ALKO • Automatic reversing function • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Toolbox mounted on the drawbar • Spare wheel in the rear of the trailer • 13-pin connector • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, long-lasting and reliable. • Dynamic LED turn signals are also highly visible in bad weather • Integrated rear fog light • Various marker lights front, side and rear • Lighting recessed in the rear frame • Heavy-duty support wheel • 5-year chassis warranty

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 1.300.030.578, functionality: fully functional, overall weight: 5,000 kg, number of spindles: 8, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 8 pcs. MACHINE DETAILS Voltage: 400 V Power consumption: 35 A Fuse rating: 50 A Empty weight: 5,000 kg Number of transport packages: 3 pcs. EQUIPMENT Godpfx Acsz Nivvsaeuh Documentation available Drilling tool available Tools included CE marking Type of milling table: beam table Material clamping system: pneumatic

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. Godpfx Acerftxfoaouh The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm Gsdpfoz I A Hqsx Acajuh V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: used, Year of construction: 2022, Tires: 10.0/75-15.3, overrun brake, top-mounted drawbar eye, support leg, 3-way tipper, grid attachment, lighting, 2,760 kg permissible total weight. Guedoz Sa Sqepfx Acaoh

Condition: good (used), clear span: 1,800 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 9,540 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 9,540 mm Number of bays per row of shelves: 05 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 100 pcs. Total pallet spaces: 100 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg Gujdpfotyyr Ssx Acajh The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 06x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 90x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 45x fitted shelving, second-hand Design: with notches Material color: hot-dip galvanized Total depth: approx. 1,060 mm (bearing bar direction) for upright depth: approx. 1,050 mm Internal depth: approx. 1,056 mm Total width: approx. 1,780 mm (crossbar direction) Support bar spacing: 28|1.50 mm Crossbar support: approx. 58 mm Frame height: approx. 44 mm Mesh width: approx. 33 x 33 mm Weight per unit: approx. 33.310 kg Internal designation: GR-76 180x locking pin, used Material color: sendzimir galvanized For securing the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 782 kg, maximum load weight: 1,918 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 Three-sided tipper + Integrated aluminum loading ramps + electric tipping control NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Integrated aluminum loading ramps in the ramp compartment, 2.8t load capacity Electric tipping control 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides Godpfxszxr Sms Acaeuh 15mm thick, non-slip and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -35cm side panels -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without bow -High cover 160cm - 200cm More accessories available upon request! plus freight to Gera and vehicle registration certificate 250 € net Pictures are for example purposes only and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. A wide selection of rental trailers can be found with us. Visit us online or come by!

Condition: used, Price plus VAT. The goods are also available in other quantities and configurations. Included in this package: 5 x uprights at 4,500 mm x 1,100 mm (blue) 5 x crash guards U-shape, used 16 x beams at 2,700 mm (orange) 30 x picking beams at 2,700 mm (orange) 15 x shelf inserts 270 cm x 110 cm x 22 mm 11.3 grid mesh rear panels, 300 cm high -> 33.90 m² This results in a racking row with 4 bays, each with 7 levels + ground-level pallet position = a total of 27 pallet spaces (800 kg per pallet) 15 x picking levels 270 cm x 110 cm with 500 kg per position 1 walk-through bay Approx. 280 uprights and 2,000 beams available for this system. Just contact us! Manufacturer: Mecalux Condition: used, good condition Height: 4,500 mm Length: approx. 11.30 running metres Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load: 2,400 kg Bay load: 7,200 kg Pallet spaces: 27 Accessories such as: - Floor mounting Guodpfoyg Iy Rox Acajh - Connectors - Load warning signs - Collision protection guards - Guardrails - Grating panels - Rear mesh panels - Depth support bars - Safety railings …and much more. Simply enquire with us!

Condition: new, Mesh shelf for pallet racking - new. The mesh shelf fulfils the function of filling the space between the beams of the pallet rack. It is made of high-quality zinc-coated metal. The grid creates a picking level from which the storekeeper can retrieve assortments in bulk or in boxes. It has 3 or 4 reinforcing crossbars (omeges). Mesh shelves are widely used for: storing and sorting as well as displaying goods in warehouses, wholesalers. The use of mesh panels makes it possible to manage space in the warehouse, to maintain order. Thanks to their light steel structure, mesh shelves are suitable for self-assembly, they guarantee air flow and access to light, thanks to which they protect stored goods against dampening. The offer applies to the mesh shelf with a load capacity of 300kg NEW (MTP004701): Width: 88 cm. Depth: 110 cm. Load capacity: 300 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price 9,25 euro per piece. This offer applies to the mesh shelf with 500kg load capacity NEW (MTP003950): Width : 89 cm. Depth: 110 cm. Load capacity: 500 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price: EUR 10.65 per piece. Godpfxou Ttgmo Acaeuh This offer applies to the mesh shelf with load capacity of 500kg NEW (MTP000707): Width : 88 cm. Depth: 80 cm. Load capacity: 500 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price: 11.25 euros per piece. This offer applies to the mesh shelf with load capacity of 1000kg NEW (MTP004268): Width : 88 cm. Depth: 110 cm. Load capacity: 1000 kg/m2. Mesh size: 5×10 cm. Finish: zinc-plated. Pallet quantity : 100 pieces. Price: €13.85 per piece. Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. To check wholesale and retail prices within Poland, please contact us. * Large quantities available immediately. * Quick dispatch to the desired location. * Transport costs are not included in the offer. * Transport throughout Europe possible.

Condition: excellent (used), Mesh Gratings / Shelf Panels for Pallet Racks for 180, 270, and 360 cm Bay Widths Specifications: Material finish: hot-dip galvanized Overall width: approx. 1,340 mm (crossbar direction) Overall depth: approx. 1,080 mm (load bar direction) Suitable for frame depth: 1,100 mm Clear support span: approx. 990 mm Beam support: approx. 50 mm Mesh size: approx. 33 x 66 mm Load bar height: 30 mm or Material finish: hot-dip galvanized Overall width: approx. 1,330 mm (crossbar direction) Overall depth: approx. 1,040 mm (load bar direction) Suitable for frame depth: 1,050 mm Clear support span: approx. 940 mm Beam support: approx. 50 mm Mesh size: approx. 45 x 70 mm Gjdpfxep Duf Nj Acajuh Load bar height: 30 mm We stock mesh gratings for the following rack depths: 1 m, 1.05 m, 1.1 m or 1.2 m This mesh grating is the perfect solution to optimize your racking and provides excellent support for your storage requirements. Price on request – Get professional advice! Looking for additional shelf panels or mesh gratings in other versions? No problem! Our team will be happy to help you design a customized racking solution tailored to your individual requirements. Do you have a rack you wish to sell? Simply send us photos and measurements, and we will provide you with a fair offer. Contact us: BLB GmbH – Contact person: Mr. Dominik Blum Tel. Take advantage of our delivery service directly to your site! If you have any questions, please do not hesitate to contact us – we look forward to your call or message!

Condition: new, Grid back panel for pallet racking, new Manufacturer: Garantell - Protection against falling goods - Easy to assemble - Complete delivery including all accessories - For indoor use According to drawing (see images) Mesh size: 50x50 Width: 47,000 mm Height: 4,000 mm Supports: 17 Walls: 1 Surface treatment: Wire and band hot-dip galvanized with a zinc coating of ~7 μm before the welding process. Included in delivery: Connector for back panel: 42 pieces Guedpfezdiwgox Acajh consisting of: - Fastener, back panel grid: 42 pieces - Self-drilling screw 4.2x13, galvanized: 168 pieces - Flange nut M8, galvanized: 84 pieces - Flange screw M8x20, galvanized: 84 pieces Fastener for mounting from the outside, back panel grid: 44 pieces consisting of: - Mounting fastener: 176 pieces - Metal screw: 4.8x13: 352 pieces Bolt package for console, M8x25: 51 pieces consisting of: - Flange nut M8, galvanized: 102 pieces - Flange screw M8x20, galvanized: 102 pieces - Washer 8.4x25x2, galvanized: 102 pieces Product catalog/Assembly instructions: 1 piece Panel (HxW) 2,200x2,000 Mesh 50x50, Ø 3.00x4.00: 41 pieces Panel (HxW) 800x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece Panel (HxW) 1,100x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece Panel (HxW) 1,900x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece Front bracket 250 mm: 51 pieces Consisting of packages: 1 piece W 300mm x D 2130mm x H 2,074mm, 157 kg 1 piece W 800mm x D 2060mm x H 2,374mm, 850 kg 2 pieces total Note: This grid back panel is being sold as part of a customer order cancellation and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Gusdpfxozd Sulj Acaeh

Condition: new, functionality: fully functional, machine/vehicle number: NEW-4, empty load weight: 796 kg, maximum load weight: 2,704 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K3 306 170 3500 2E Three-sided tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading platform height: 75cm Total weight: 3500kg Payload: 2702kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg lashing force Reinforced 13" C-type tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Electric tipping control with connector for charging the 12V battery Electric limitation of the tipping angle to the side U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side boards (price reduction) - Black Edition (Powder-coated side boards and rims in black) - Integrated ramps 2800kg - 35cm side boards - Charger - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work when the vehicle is tilted - Folding crank rear supports - Complete LED lighting - Anti-theft device - Net with fine or coarse mesh - H-frame - Leaf grid in various heights, also closed - Extension side boards 30cm with tensioning latch - Flat cover with or without bows - High cover 160cm - 200cm Further accessories on request! Plus freight to Gera and vehicle registration document 250 € net Pictures are for illustration purposes only and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Gedpfjghpc Tsx Acasuh Visit us online or come by!

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, mesh extension Equipment: - Spare wheel - Robust steel tub - Highly adaptable Net price: €8,873.95 / Gross price: €10,560.00 Article number: GP2335401802.51 Technical data: • Brand: Brian James • Model: General Plant • Vehicle type: Construction machinery trailer • Vehicle condition: New Gedoz Ri A Espfx Acaeuh • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 400 x 180 x 96 cm • External dimensions (LxWxH): 569 x 240 x 210 cm • Loading height of the floor: 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,025 kg • Payload: 2,475 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Universal all-purpose construction machinery trailer - Unique on the market • Every available option can be flexibly added or removed, enabling customized adaptation for virtually any application • Attachment option on all 4 corners for sideboards, tarpaulin frames, sideboard extensions, or front wall extensions • Steel sideboard extension - 50% mesh extension + 50% closed sideboard, can be removed without tools • Incl. recessed eccentric locks • Durable rubber strip seals the extension to the sideboard at the bottom • Vehicle also designed for all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, extensions, etc. can be retrofitted at any time • Robust steel mudguards with non-slip perforated profile • Reinforced screen-printed wood floor 18mm, non-slip and waterproof • Very stable steel frame welded • Frame completely hot-dip galvanized • Chassis with additional longitudinal beam under the loading area • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Very low chassis for a shallow approach angle • Lashing points at the bottom and top of the sideboard (1000dAN/kg), TÜV certified • Side panel color: black • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the sideboard • Reverse automatic • ALKO overrunning device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pole plug • Complete LED lighting: Extremely bright, durable, and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Automatic heavy-duty support wheel • 5-year chassis warranty

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, steel side boards, hinged tailgate Equipment: - Electric pump - Hinged tailgate - Double hydraulics Net price: €10,550.42 / Gross price: €12,555.00 Gsdpfx Asz Ri Eyscaouh Article number: TI2335362010.01 Technical data: • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New • Initial registration: Without initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 360 x 200 x 30 cm • External dimensions (L x W x H): 490 x 211 x 102 cm • Loading height of the floor: 71 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,172 kg • Payload: 2,328 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side boards • Click & Clamp: The new "Click & Clamp" system. For maximum strength and quick addition and removal of various optional side boards and accessories. • Automatically adjustable stakes and clampable side boards ensure a comfortable ride without unwanted rattling. • Side boards with robustly integrated fasteners • All side boards can be folded down and removed • Steel corner posts can be removed • Attachment option at all 4 corners for tarpaulin frames, lattice attachments, side board attachments or front panel extension • Welded mesh hook under the loading area • Robust, rattle-free tensioning fasteners on the side boards • Galvanized steel sheet on a multiplex base plate • Reinforced, sturdily screwed V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded • 8 lashing points recessed in the floor (1000 DaN/kg), TÜV certified! Closed with spring plates at the bottom • Hinged rear tailgate on galvanized steel • U-profile on the rear for easier placement of the ramps • Integrated ramp compartments for easy retrofitting of ramps • Chassis color: black • Side panel color: black • Double solid 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Removable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charging: The battery is charged via the vehicle's ignition when the engine is running (depending on the towing vehicle) • Battery level indicator • Battery disconnect switch • Support for maintenance work under the loading area • Rubber spring axles from ALKO • Reverse driving automatic • ALKO overrunning device and parking brake • Steel casting coupling head with integrated high-security lock ALKO • Dust box mounted on the drawbar • Spare wheel in the rear of the trailer • 13-pin plug • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, long-lasting and reliable. • Dynamic LED turn signals are also clearly visible in bad weather • Integrated rear fog lamp • Various marker lights at the front, side and rear • Lighting recessed in the rear frame • Heavy-duty support wheel • 5-year chassis warranty

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 747 kg, maximum load weight: 1,953 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper + Enclosed Leaf Grid 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading platform height: 66cm Total weight: 2700Kg Payload: 2073Kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning closure Can be folded down and removed on all sides Enclosed leaf grid 60cm made of hot-dip galvanized steel Also can be opened and removed on 4 sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C-tire with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED marker lights at the front Lights at the rear with reversing light and triangular reflector Upper frame mounted on rubber pads Large tilting angle of 51 degrees rearwards Hand pump with adjustable handle OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder Gujdpfx Acjz A T Uhsaeh -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Integrated ramp rails 2800Kg -Electric tilting operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also enclosed -Extension side boards 30cm with tensioning closure -Flat cover with or without bows -High cover 160cm or 180cm Further accessories available upon request! Plus shipping to Gera and vehicle registration document 200 € net. Pictures are examples and may show optional accessories that incur extra costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.