Used Mep Shark 332 Cnc Fe for sale (13,242)

Condition: excellent (used), Year of construction: 2004, Features Machine type: CNC automatic bandsaw Cutting angle: 0° (straight cut) Maximum round stock capacity: Ø 300 mm Maximum square stock capacity: 250 × 250 mm Maximum rectangular stock capacity: 330 × 250 mm Blade dimensions: 3650 × 27 × 0.9 mm Blade motor: 2.2 kW three-phase Blade speed: Variable, approximately 15–100 m/min via inverter Bodpfxezkubuj Aqwoll Maximum clamping opening: 335 mm Bar feed: Automatic CNC with feed clamp Power supply: 400 V three-phase (50 Hz) Operating cycles: Manual, semi-automatic and programmable automatic

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min Bjdpfx Aqjra Rrlswoll weight of the machine ca. 1050 kg

Condition: refurbished (used), Year of construction: 2007, Used automatic hydraulic band saw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Bsdpozyfwrsfx Aqwsll Cutting angle: from 45° to +60° Operating modes: manual, semi-automatic-dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2007 Weight: 1050kg The machine has been fully refurbished and tested.

Condition: good (used), Description Used band saw machine Year of manufacture: 2006 Technical specifications: Cutting speed: 40/80 m/min Saw band: 3320x27x0.9 mm Cooling: liquid/mist lubrication CAPACITIES: 0° - 300 mm Ø Blodpfx Aqjzu R Dtewel - 260 mm square - 330 x 260 mm 45° left - 260 mm Ø - 250 mm square - 270 x 200 60° left - 180 mm Ø - 170 mm square 45° right - 200 mm Ø - 180 mm square - 200 x 160 mm

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Bljdpfjzrpl Dex Aqwsl Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm Bodjyvvpmepfx Aqwoll speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm Bjdjfg E H Uspfx Aqwell capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) Blsdpsy Ani Eefx Aqwol - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: new, dimensions of saw-band 3320x27x0,9 mm Bledpfx Ajyv Na Soqwol 40/80 m/min 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm 260 mm 250 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm 200 mm 180 mm 200x160 mm weight of the machine ca. 640 kg dimensions of the machine ca. 2140x1300x1950 mm

Condition: new, 36/72 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm capacity 45 degrees: round 260/200 mm capacity 45 degrees: square 250/180 mm capacity 45 degrees: flat 270x200/200x160 mm Bljdpfeyv Nmlex Aqwel dimensions of saw-band 3650x27x0,9 mm total power requirement 1,5/1,8 kW Overall size 2130x1400x1950 mm Weight 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for Blodpfofg E H Tox Aqwjl the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm Bjdpeyv Nylefx Aqwjll capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: Bedsfg E H Eopfx Aqwsll - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Blsdpozxpkmjfx Aqwjl

Condition: new, Model Name Bledpfx Aqogvkafjwel Shark 332-1 SXI evo

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. Bledpfxefm T Hbj Aqwol The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: excellent (used), Year of construction: 2013, Used automatic band saw MEP SHARK 310 CNC HS Blade dimensions: 4640x34x1.1 mm Variable blade cutting speed: 15–115 m/min Cutting capacity: round 310 mm, square 310x310 mm Automatic blade tensioner Automatic chip conveyor Additional equipment: vertical vise Machine weight: 2200 kg Bljdjyyuxnepfx Aqwel The machine is in excellent condition and will be fully inspected and serviced.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load Bledpfxsxab S Eo Aqwjl * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm Blsdoxaagbepfx Aqwjl capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Disc size 350 mm Bodjx Hw Sqepfx Aqwoll Blade rotation speed 1700 / 3400 rpm - 2 speeds

Condition: new, Model Name Bjdpfx Aqogvquwewjll Shark 332-1 CCS

Condition: good (used), Year of construction: 2015, 1 used miter band saw Manufacturer: MEP Type: Shark 512 SXI EVO Blsdpfx Aezlgmlsqwjl Year of manufacture: 2015 Technical data: Design: Semi-automatic double miter metal band saw Miter range: -60° to +60° Max. cutting capacity at 0°: 510 × 320 mm Saw band dimensions: 4,640 × 34 × 1.1 mm Band speed: 15–100 m/min (continuously variable) Drive power: 4.0 kW Vise opening: 515 mm Machine weight: approx. 1,190 kg with various roller conveyors

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Cutting capacity 90° rectangular: 280 x 220 mm Cutting capacity +45° round: ø230 mm Cutting capacity +45° rectangular: 220 x 200 mm Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Machine (L×W×H): 165 x 115 x 180 cm Machine weight: 475 kg Blsdpszi Ackofx Aqwel

Condition: used, Year of construction: 2022, functionality: fully functional, type of input current: DC, cutting height (max.): 285 mm, actuation type: manual, overall weight: 440 kg, saw band length: 2,950 mm, saw band width: 27 mm, Equipment: documentation/manual, For sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf MEP manual bandsaw machine TYPE: SHARK 282 CCS Motor power 1.5/1.8 kW Table opening 285 mm Band dimensions 2950x27x0.9 mm Weight 440 kg Blodpfey Uwuusx Aqwel Speed 36/72 m/min Cutting capacity at 0° 250 / 220x220 / 280x220 Cutting capacity at 45° right 230 / 200x200 / 220x200 Cutting capacity at 45° left 200 / 170x170 / 200x140 Cutting capacity at 60° right 120 / 80x80 / 140x80 Cutting capacity at 60° left Accessories: - MD 12 micro-dosing device MINI-GF - EL-1/2-2L - Conveyor roller table, type K 110

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system Bsdsxaaqtepfx Aqwjll - operating instructions in German